JK-P3
Based on 1 Customer Validation
JK-P3 is a potent and pan VEGFR2 inhibitor, with IC50s of 7.83 μM, 27 μM and 5.18 μM for VEGFR2, FGFR1 and FGFR3, respectively. JK-P3 can inhibit VEGF-A-stimulated VEGFR2 activation and intracellular signalling, also inhibits endothelial monolayer wound closure and angiogenesis, as well as fibroblast growth factor receptor kinase activity in vitro. JK-P3 has anti-angiogenic activity.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.75%
- CAS 番号: 942655-44-9
- 分子式: C18H17N3O3
- 分子量:323.35
-
保管条件:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
VEGFR アイソフォーム固有の製品をすべて表示
More
生物活性
|
VEGFR2 7.83 μM (IC50) |
FGFR1 27 μM (IC50) |
FGFR3 5.18 μM (IC50) |
JK-P3 (0.01-10 μM; 1 hour) inhibits VEGF-A-mediated VEGFR2 phosphorylation and downstream signalling[1].
JK-P3 (0.01-10 μM; 16 hours) dose not inhibit HUVEC cell proliferation at 0.01~1 μM, and shows slight inhibitory activity at 10 μM[1].
JK-P3 (1 and 10 μM; 1 hour) does not significantly inhibit VEGF-A-stimulated endothelial tube formation at 1 µM, but almost completely inhibits the ability of endothelial cells to form into elongated hollow tubes in the presence of VEGF-A at 10 µM[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Primary endothelial cells (treated for 7.5 min with 25 ng/mL VEGF-A)[1]
-
Concentration:0.01, 0.1, 1 and 10 μM
-
Incubation Time:1 hour
-
Result:Almost completely inhibited VEGFR2 Y1175 phosphorylation, also inhibited VEGF-A-stimulated PLCγ1, Akt and ERK1/2 phosphorylation.
-
Cell Line:HUVEC[1]
-
Concentration:0.01, 0.1, 1 and 10 μM
-
Incubation Time:16 hours
-
Result:Failed to inhibit endothelial cell proliferation at 0.01~1 μM but elicited a small but significant increase in cell proliferation at certain lower concentrations.
化学情報
-
CAS 番号 942655-44-9
-
性状 Solid
-
分子量 323.35
-
分子式 C18H17N3O3
-
Color White to off-white
-
SMILES
O=C(NC1=NNC(C2=CC=CC=C2)=C1)C3=CC=C(OC)C(OC)=C3
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
溶剤 & 溶解度
DMSO : 50 mg/mL (154.63 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.73 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.73 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0926 mL | 15.4631 mL | 30.9262 mL | 77.3156 mL |
| 5 mM | 0.6185 mL | 3.0926 mL | 6.1852 mL | 15.4631 mL | |
| 10 mM | 0.3093 mL | 1.5463 mL | 3.0926 mL | 7.7316 mL | |
| 15 mM | 0.2062 mL | 1.0309 mL | 2.0617 mL | 5.1544 mL | |
| 20 mM | 0.1546 mL | 0.7732 mL | 1.5463 mL | 3.8658 mL | |
| 25 mM | 0.1237 mL | 0.6185 mL | 1.2370 mL | 3.0926 mL | |
| 30 mM | 0.1031 mL | 0.5154 mL | 1.0309 mL | 2.5772 mL | |
| 40 mM | 0.0773 mL | 0.3866 mL | 0.7732 mL | 1.9329 mL | |
| 50 mM | 0.0619 mL | 0.3093 mL | 0.6185 mL | 1.5463 mL | |
| 60 mM | 0.0515 mL | 0.2577 mL | 0.5154 mL | 1.2886 mL | |
| 80 mM | 0.0387 mL | 0.1933 mL | 0.3866 mL | 0.9664 mL | |
| 100 mM | 0.0309 mL | 0.1546 mL | 0.3093 mL | 0.7732 mL |
JK-P3 関連分類
HY-108933 関連分類
Powered by Bioz