S65487
Based on 1 Customer Validation
S65487 (VOB560), a potent and selective BCL-2 inhibitor, is a proagent of S55746. S65487 is also active on BCL-2 mutations, such as G101V and D103Y. S65487 has poor affinity with MCL-1, BFL-1 and BCL-XL. S65487 induces apoptosis and has anticaner activities.
For research use only. We do not sell to patients.
- Purity: 99.91%
- CAS No.: 1644600-79-2
- Formula: C41H41ClN6O4
- Molecular Weight:717.26
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Blood Cancer Compound Library
HY-L079
-
Mitochondria-Targeted Compound Library
HY-L089
-
Targeted Diversity Library
HY-L099
-
Highly Selective Inhibitors Library
HY-L158
-
Highly Selective Activators Library
HY-L159
-
Cell Death Library
HY-L162
-
Anti-Hematopathy Compound Library
HY-L171
-
Anti-Ovarian Cancer Compound Library
HY-L173
-
Mitophagy Compound Library
HY-L180
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| RS4-11 | IC50 |
12 nM
Compound: 2; S65487; VOB560
|
Inhibition of cell growth in human RS4-11 cells incubated for 2 days by CellTiter-Glo luminescent cell viability assay
Inhibition of cell growth in human RS4-11 cells incubated for 2 days by CellTiter-Glo luminescent cell viability assay
|
[PMID: 38695063] |
| RS4-11 | IC50 |
128 nM
Compound: 2; S65487; VOB560
|
Inhibition of cell growth in human RS4-11 cells harboring Bcl-2 G101V mutant incubated for 2 days by CellTiter-Glo luminescent cell viability assay
Inhibition of cell growth in human RS4-11 cells harboring Bcl-2 G101V mutant incubated for 2 days by CellTiter-Glo luminescent cell viability assay
|
[PMID: 38695063] |
S65487 binds to the BH3 hydrophobic groove of BCL-2. S65487 induces apoptosis in a panel of hematological cancer cell lines and inhibits cell proliferation with IC50s in the low nM range[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1644600-79-2
-
Appearance Solid
-
Molecular Weight 717.26
-
Formula C41H41ClN6O4
-
Color Light yellow to yellow
-
SMILES
O=C(C1=C(C)N(C)C(C2=C(C=CC(Cl)=C2)C(N3[C@@H](CC4=CC=CC=C4C3)CN5CCOCC5)=O)=C1)N(C6=CC=C(C=C6)O)C7=C(C)N(C)C(C#N)=C7
-
Synonyms
VOB560
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
DMSO : 200 mg/mL (278.84 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (6.97 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (279 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.3942 mL | 6.9710 mL | 13.9419 mL | 34.8549 mL |
| 5 mM | 0.2788 mL | 1.3942 mL | 2.7884 mL | 6.9710 mL | |
| 10 mM | 0.1394 mL | 0.6971 mL | 1.3942 mL | 3.4855 mL | |
| 15 mM | 0.0929 mL | 0.4647 mL | 0.9295 mL | 2.3237 mL | |
| 20 mM | 0.0697 mL | 0.3485 mL | 0.6971 mL | 1.7427 mL | |
| 25 mM | 0.0558 mL | 0.2788 mL | 0.5577 mL | 1.3942 mL | |
| 30 mM | 0.0465 mL | 0.2324 mL | 0.4647 mL | 1.1618 mL | |
| 40 mM | 0.0349 mL | 0.1743 mL | 0.3485 mL | 0.8714 mL | |
| 50 mM | 0.0279 mL | 0.1394 mL | 0.2788 mL | 0.6971 mL | |
| 60 mM | 0.0232 mL | 0.1162 mL | 0.2324 mL | 0.5809 mL | |
| 80 mM | 0.0174 mL | 0.0871 mL | 0.1743 mL | 0.4357 mL | |
| 100 mM | 0.0139 mL | 0.0697 mL | 0.1394 mL | 0.3485 mL |
Powered by Bioz