USP15-IN-1
Based on 5 publication(s) in Google Scholar
USP15-IN-1 is a potent USP15 inhibitor with an IC50 value of 3.76 μM. USP15-IN-1 can be used for researching anticancer.
For research use only. We do not sell to patients.
- Purity: 99.68%
- CAS No.: 2260826-16-0
- Formula: C22H23N3O3
- Molecular Weight:377.44
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Ubiquitination Compound Library
HY-L050
-
Anti-Blood Cancer Compound Library
HY-L079
-
Metabolic Enzyme Compound Library
HY-L146
-
Protease Inhibitor Library
HY-L147
-
Anti-Hematopathy Compound Library
HY-L171
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Publications Citing Use of MedChemExpress (MCE) USP15-IN-1
More
Biological Activity
IC50: 3.76 μM (USP15)[1]
USP15-IN-1 (compound IM001) (0.001-5 μM; 48 h) exhibits highly anti-proliferative activity against non-small cell lung carcinoma and leukemia cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Non-small cell lung carcinoma and leukemia cells
-
Concentration:0.001 μM, 0.005 μM, 0.01 μM, 0.05 μM, 0.1 μM, 0.5 μM, 1 and 5 μM
-
Incubation Time:48 h
-
Result:Exhibited highly anti-proliferative activity against non-small cell lung carcinoma and leukemia cells with IC50s of 1.94 μM and 2.22 μM.
Chemical Information
-
CAS No. 2260826-16-0
-
Appearance Solid
-
Molecular Weight 377.44
-
Formula C22H23N3O3
-
Color White to off-white
-
SMILES
O=C(C1=CC2=C(NC3=C2CCN(C3)C(CC4=CC=CC=C4)=O)C=C1)NCCO
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (5)
-
Journal Impact Factor
-
Most Recent
-
Autophagy
2026 Jan 28:1-15. PMID: 41606832 -
Cancer Immunol Res
USP15 Facilitates Colorectal Cancer Immune Evasion through SMYD3/CCL2-Dependent Myeloid-Derived Suppressor Cell Recruitment. [Abstract]2025 Aug 1;13(8):1226-1245. PMID: 40323348 -
Mol Med
USP15 regulates radiation-induced DNA damage and intestinal injury through K48-linked deubiquitination and stabilisation of ATM. [Abstract]2024 Nov 9;30(1):205. PMID: 39522000 -
Biochim Biophys Acta Mol Cell Res
USP15 promotes brain cell disulfidptosis in mouse subjected to ischemic stroke through a mechanism involving deubiquitination of SETD1B. [Abstract]2025 Jul 1;1872(7):120016. PMID: 40609959 -
Solvent & Solubility
DMSO : 100 mg/mL (264.94 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 0.83 mg/mL (2.20 mM); Clear solution
This protocol yields a clear solution of ≥ 0.83 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (8.3 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 0.83 mg/mL (2.20 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 0.83 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (8.3 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6494 mL | 13.2471 mL | 26.4943 mL | 66.2357 mL |
| 5 mM | 0.5299 mL | 2.6494 mL | 5.2989 mL | 13.2471 mL | |
| 10 mM | 0.2649 mL | 1.3247 mL | 2.6494 mL | 6.6236 mL | |
| 15 mM | 0.1766 mL | 0.8831 mL | 1.7663 mL | 4.4157 mL | |
| 20 mM | 0.1325 mL | 0.6624 mL | 1.3247 mL | 3.3118 mL | |
| 25 mM | 0.1060 mL | 0.5299 mL | 1.0598 mL | 2.6494 mL | |
| 30 mM | 0.0883 mL | 0.4416 mL | 0.8831 mL | 2.2079 mL | |
| 40 mM | 0.0662 mL | 0.3312 mL | 0.6624 mL | 1.6559 mL | |
| 50 mM | 0.0530 mL | 0.2649 mL | 0.5299 mL | 1.3247 mL | |
| 60 mM | 0.0442 mL | 0.2208 mL | 0.4416 mL | 1.1039 mL | |
| 80 mM | 0.0331 mL | 0.1656 mL | 0.3312 mL | 0.8279 mL | |
| 100 mM | 0.0265 mL | 0.1325 mL | 0.2649 mL | 0.6624 mL |
Powered by Bioz