(1R,2R)-ML-SI3
Based on 3 publication(s) in Google Scholar
(1R,2R)-ML-SI3 is an isomer of ML-SI3 and a potent inhibitor of three isoforms of TRPML. (1R,2R)-ML-SI3 inhibits TRPMLs with IC50s of 1.6 μM (TRPML1), 2.3 μM (TRPML2), and 12.5 μM (TRPML3), respectively.
For research use only. We do not sell to patients.
- Purity: 99.79%
- CAS No.: 2418594-00-8
- Formula: C23H31N3O3S
- Molecular Weight:429.58
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications Citing Use of MedChemExpress (MCE) (1R,2R)-ML-SI3
More-
Bio/Physico-chemical Assay
-
Flow Cytometry
-
ELISA
Biological Activity
|
TRPML1 1.6 μM (IC50) |
TRPML2 2.3 μM (IC50) |
TRPML3 12.5 μM (IC50) |
Table: Activation and inhibition of the three subtypes of TRPML by the ML-SI3-type compounds[1]
Product_Names Catalog_No EC50 for activation [μM] IC50 for inhibition [μM] TRPML1 TRPML2 TRPML3 TRPML1 TRPML2 TRPML3 (rel)-ML-SI3 HY-139426A - 3.3±1.5 - 3.1±1.5 - 28.5±15.9 (cis)-ML-SI3 / - 9.4±2.7 29.0±4.1 18.5±1.9 - - (1S,2S)-ML-SI3 HY-134819 - 2.7±1.4 10.8±0.5 5.9±1.7 - - (1R,2R)-ML-SI3 HY-134819A - - - 1.6±0.7 2.3±1.1 12.5±7.6 Mean values ± SD of at least three independent experiments are shown. -: no effect. ML-SI3 HY-139426 The mixtrue of (rel)-ML-SI3 and (cis)-ML-SI3
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2418594-00-8
-
Appearance Solid
-
Molecular Weight 429.58
-
Formula C23H31N3O3S
-
Color White to off-white
-
SMILES
COC1=CC=CC=C1N2CCN([C@@H]3CCCC[C@H]3NS(C4=CC=CC=C4)(=O)=O)CC2
-
Synonyms
(-)-trans-ML-SI3
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Cell Calcium
MONNA alleviates MPTP-induced Parkinson's disease in zebrafish by activating TFEB dependently on ER Calcium. [Abstract]2026 Mar:134:103125. PMID: 41637953
(1R,2R)-ML-SI3 purchased from MedChemExpress. Usage Cited in: Cell Calcium. 2026 Mar:134:103125. [Abstract]
TRPML1 currents density in lysosomes with or without (1R,2R)-ML-SI3 (ML-SI3, 30 μM; 6 h).
-
-
(1R,2R)-ML-SI3 purchased from MedChemExpress. Usage Cited in: bioRxiv. 2025 January 01.
RAW264.7 macrophages were treated with (1R,2R)-ML-SI3 (ML-SI3, 30-100 μM) and stimulated with Bafilomycin A1 (100 nM) for 4 hrs. Lysosomal exocytosis was measured by quantifying the cell surface abundance of LAMP-1 by FACS. Mean +/- SEM, n=3.
(1R,2R)-ML-SI3 purchased from MedChemExpress. Usage Cited in: bioRxiv. 2025 January 01.
RAW264.7 macrophages were treated with (1R,2R)-ML-SI3 (ML-SI3, 30-100 μM) and stimulated with Bafilomycin A1 (10 nM) overnight. GPNMB secretion was measured by ELISA. Mean +/- SEM, n=3.
Solvent & Solubility
DMSO : 100 mg/mL (232.79 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (280 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3279 mL | 11.6393 mL | 23.2786 mL | 58.1964 mL |
| 5 mM | 0.4656 mL | 2.3279 mL | 4.6557 mL | 11.6393 mL | |
| 10 mM | 0.2328 mL | 1.1639 mL | 2.3279 mL | 5.8196 mL | |
| 15 mM | 0.1552 mL | 0.7760 mL | 1.5519 mL | 3.8798 mL | |
| 20 mM | 0.1164 mL | 0.5820 mL | 1.1639 mL | 2.9098 mL | |
| 25 mM | 0.0931 mL | 0.4656 mL | 0.9311 mL | 2.3279 mL | |
| 30 mM | 0.0776 mL | 0.3880 mL | 0.7760 mL | 1.9399 mL | |
| 40 mM | 0.0582 mL | 0.2910 mL | 0.5820 mL | 1.4549 mL | |
| 50 mM | 0.0466 mL | 0.2328 mL | 0.4656 mL | 1.1639 mL | |
| 60 mM | 0.0388 mL | 0.1940 mL | 0.3880 mL | 0.9699 mL | |
| 80 mM | 0.0291 mL | 0.1455 mL | 0.2910 mL | 0.7275 mL | |
| 100 mM | 0.0233 mL | 0.1164 mL | 0.2328 mL | 0.5820 mL |