A-3 hydrochloride
Based on 1 Customer Validation
A-3 hydrochloride is a potent, cell-permeable, reversible, ATP-competitive non-selective antagonist of various kinases. It against PKA (Ki=4.3 µM), casein kinase II (Ki=5.1 µM) and myosin light chain kinase (MLCK) (Ki=7.4 µM). A-3 hydrochloride also inhibits PKC and casein kinase I with Ki values of 47 µM and 80 µM, respectively.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度 : 99.45%
- CAS 番号: 78957-85-4
- 分子式: C12H14Cl2N2O2S
- 分子量:321.22
-
保管条件:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
-
HY-B0764
Bucladesine sodiumcAMP Analog -
HY-14393
EmodinNatural Anthraquinone -
HY-18991
CCG215022GRK Inhibitor -
HY-N6789
KT5720PKA Inhibitor -
HY-14393R
Emodin (Standard) -
HY-101017
Palmitoylcarnitine chlorideAcylcarnitine -
HY-111673
8-CPT-Cyclic AMP sodiumPKA Activator -
HY-B0764R
Bucladesine sodium (Standard)cAMP Analog -
HY-B0567
Dequalinium ChloridePotassium Channel Inhibitor -
HY-B1898
MetadoxinePKA Inhibitor -
HY-B0183
Ellagic acidSHP2 Inhibitor -
HY-50855
SilmitasertibCasein Kinase 2 Inhibitor
生物活性
製品説明
IC50 & Target
[1]|
CK1 80 μM (Ki) |
CK2 5.1 μM (Ki) |
PKC 47 μM (Ki) |
PKA 4.3 μM (Ki) |
体外実験
A-3 hydrochloride inhibits MLC-kinase competitively with respect to ATP and that the Ki value is 7.4 μM. A-3 is also a competitive inhibitor of cAMP-dependent protein kinase, cGMP-dependent protein kinase, protein kinase C, casein kinase I, and casein kinase II, with respect to ATP, exhibits Ki values of 4.3 μM, 3.8 μM, 47 μM, 80 μM, and 5.1 μM, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
化学情報
-
CAS 番号 78957-85-4
-
性状 Solid
-
分子量 321.22
-
分子式 C12H14Cl2N2O2S
-
Color Light yellow to light brown
-
SMILES
O=S(C1=C2C=CC=C(Cl)C2=CC=C1)(NCCN)=O.[H]Cl
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
溶剤 & 溶解度
体外:
DMSO : 125 mg/mL (389.14 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 50 mg/mL (155.66 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
体内:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (6.48 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (6.48 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
純度とドキュメンテーション
-
データシート (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 3.1131 mL | 15.5657 mL | 31.1313 mL | 77.8283 mL |
| 5 mM | 0.6226 mL | 3.1131 mL | 6.2263 mL | 15.5657 mL | |
| 10 mM | 0.3113 mL | 1.5566 mL | 3.1131 mL | 7.7828 mL | |
| 15 mM | 0.2075 mL | 1.0377 mL | 2.0754 mL | 5.1886 mL | |
| 20 mM | 0.1557 mL | 0.7783 mL | 1.5566 mL | 3.8914 mL | |
| 25 mM | 0.1245 mL | 0.6226 mL | 1.2453 mL | 3.1131 mL | |
| 30 mM | 0.1038 mL | 0.5189 mL | 1.0377 mL | 2.5943 mL | |
| 40 mM | 0.0778 mL | 0.3891 mL | 0.7783 mL | 1.9457 mL | |
| 50 mM | 0.0623 mL | 0.3113 mL | 0.6226 mL | 1.5566 mL | |
| 60 mM | 0.0519 mL | 0.2594 mL | 0.5189 mL | 1.2971 mL | |
| 80 mM | 0.0389 mL | 0.1946 mL | 0.3891 mL | 0.9729 mL | |
| 100 mM | 0.0311 mL | 0.1557 mL | 0.3113 mL | 0.7783 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
A-3 hydrochloride 関連分類
HY-125957 関連分類
Powered by Bioz