Flumexadol
Based on 1 Customer Validation
Flumexadol is a selective and affinity 5-HT2C receptor agonist with a Ki of 25 nM for the (+)-enantiomer of Flumexadol, and is 40-fold selective over the 5-HT2A receptor. Flumexadol is an orally active non-narcotic analgesic.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.86%
- CAS. Nr.: 30914-89-7
- Formel: C11H12F3NO
- Molecular Weight:231.22
-
Speicherung:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Alle 5-HT Receptor Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
5-HT2A Receptor |
5-HT2C Receptor |
5-HT2C Receptor 25 nM (Ki) |
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 30914-89-7
-
Appearance Liquid (Density: 1.2081 g/cm3)
-
Molecular Weight 231.22
-
Formel C11H12F3NO
-
Color Colorless to light yellow
-
SMILES
FC(C1=CC(C2CNCCO2)=CC=C1)(F)F
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 33.33 mg/mL (144.15 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (10.81 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (10.81 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Hache J, et al. The pharmacology of 1841 CERM, a new analgesic. Arzneimittelforschung. 1978;28(4):642-5. [Content Brief]
[2]. Nilsson BM. 5-Hydroxytryptamine 2C (5-HT2C) receptor agonists as potential antiobesity agents. J Med Chem. 2006 Jul 13;49(14):4023-34. [Content Brief]
[3]. Kucharczyk N, et al. Metabolites of 2-(3-trifluoromethylphenyl)tetrahydro-1,4-oxazine (CERM) 1841) in rats and dogs. Xenobiotica. 1979 Nov;9(11):703-11. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.3249 mL | 21.6247 mL | 43.2494 mL | 108.1235 mL |
| 5 mM | 0.8650 mL | 4.3249 mL | 8.6499 mL | 21.6247 mL | |
| 10 mM | 0.4325 mL | 2.1625 mL | 4.3249 mL | 10.8124 mL | |
| 15 mM | 0.2883 mL | 1.4416 mL | 2.8833 mL | 7.2082 mL | |
| 20 mM | 0.2162 mL | 1.0812 mL | 2.1625 mL | 5.4062 mL | |
| 25 mM | 0.1730 mL | 0.8650 mL | 1.7300 mL | 4.3249 mL | |
| 30 mM | 0.1442 mL | 0.7208 mL | 1.4416 mL | 3.6041 mL | |
| 40 mM | 0.1081 mL | 0.5406 mL | 1.0812 mL | 2.7031 mL | |
| 50 mM | 0.0865 mL | 0.4325 mL | 0.8650 mL | 2.1625 mL | |
| 60 mM | 0.0721 mL | 0.3604 mL | 0.7208 mL | 1.8021 mL | |
| 80 mM | 0.0541 mL | 0.2703 mL | 0.5406 mL | 1.3515 mL | |
| 100 mM | 0.0432 mL | 0.2162 mL | 0.4325 mL | 1.0812 mL |
Flumexadol Related Classifications
HY-133024 Related Classifications
Powered by Bioz