Seconeolitsine
Based on 1 Customer Validation
Seconeolitsine, an antibiotic, and is an inhibitor of targeting topoisomerase I (TopA). Seconeolitsine also is a new antimicrobial agent that can inhibit S. pneumoniae growth. Seconeolitsine can inhibit TopA relaxation activity with an IC50 value of 17 μM. Seconeolitsine can be used for the research of S. pneumoniae infections resistant to other antibiotics.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 98.65%
- CAS. Nr.: 2650074-56-7
- Formel: C19H17NO4
- Molecular Weight:323.34
-
Speicherung:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Alle Antibiotic Isoform-spezifische Produkte anzeigen
MoreAlle Topoisomerase Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
Beschreibung
IC50 & Target
|
Topoisomerase I 17 μM (IC50) |
In Vitro
Seconeolitsine (compounds 17) inhibits TopA relaxation activity in a concentration-dependent manner, with an IC50 value of 17 μM and the inhibition of TopA is enhanced by preincubation of the enzyme with the alkaloid[1].
Seconeolitsine shows great inhibition of S.pneumoniae growth with MIC50 values of 16 μM for R6, ATCC6303, CipS8, CipS9, CipR20, CipR16, CipR8, CipR45 and CipR5. And shows great inhibition of S. pneumoniae growth with MIC50 values of 8 μM for CipR42, CipR68 and CipR15[1].
Seconeolitsine has activation at low concentrations and partial inhibition at 50 μM, a concentration at which the pneumococcal TopA showed full inhibition, but not inhibits Human TOPO1[1].
Seconeolitsine (0.25×-1×MIC) affects cell growth and division in a concentration-dependent manner[1].
Seconeolitsine (30 and 100 μM), is not affected neutrophil apoptosis and human cell viability[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 2650074-56-7
-
Appearance Solid
-
Molecular Weight 323.34
-
Formel C19H17NO4
-
Color White to off-white
-
SMILES
CNCCC1=C2C=CC3=CC(OCO4)=C4C=C3C2=C5OCOC5=C1
-
Structure Classification
-
Initial Source
Streptococcus pneumoniae
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 50 mg/mL (154.64 mM; ultrasonic and warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (7.73 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0927 mL | 15.4636 mL | 30.9272 mL | 77.3180 mL |
| 5 mM | 0.6185 mL | 3.0927 mL | 6.1854 mL | 15.4636 mL | |
| 10 mM | 0.3093 mL | 1.5464 mL | 3.0927 mL | 7.7318 mL | |
| 15 mM | 0.2062 mL | 1.0309 mL | 2.0618 mL | 5.1545 mL | |
| 20 mM | 0.1546 mL | 0.7732 mL | 1.5464 mL | 3.8659 mL | |
| 25 mM | 0.1237 mL | 0.6185 mL | 1.2371 mL | 3.0927 mL | |
| 30 mM | 0.1031 mL | 0.5155 mL | 1.0309 mL | 2.5773 mL | |
| 40 mM | 0.0773 mL | 0.3866 mL | 0.7732 mL | 1.9329 mL | |
| 50 mM | 0.0619 mL | 0.3093 mL | 0.6185 mL | 1.5464 mL | |
| 60 mM | 0.0515 mL | 0.2577 mL | 0.5155 mL | 1.2886 mL | |
| 80 mM | 0.0387 mL | 0.1933 mL | 0.3866 mL | 0.9665 mL | |
| 100 mM | 0.0309 mL | 0.1546 mL | 0.3093 mL | 0.7732 mL |
Seconeolitsine Related Classifications
HY-N10495 Related Classifications
Powered by Bioz