C105SR
Based on 1 Customer Validation
C105SR is a cyclophilin D (CypD) inhibitor targeting to peptidyl-prolylcis-trans isomerase (PPIase). C105SR inhibits mitochondrial permeability transition opening (mPTP) with an IC 50 of 5 nM. C105SR inhibits hypoxia and reoxygenation inudced hepatocyte apoptosis and increases the level of calcium retention capacity (CRC). C105SR exhibits hepaprotective effect in ischaemia-reperfusion injury (IRI) mouse model.
For research use only. We do not sell to patients.
- Purity : 99.49%
- Formula: C32H33BrN4O3S
- Molecular Weight:633.60
-
Storage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Description
IC50 & Target
[1]|
Caspase 3 |
Caspase-7 |
Cyclophilin D 5 nM (IC50) |
In Vitro
C105SR (0.5/1/5/10/50/100 μM) inhibit CypD PPIase activity in Mitochondria[1].
C105SR (1μM, 4 h for hypoxia (1% O2) plus 1 h for reoxygenation (21% O2)) prevent mPTP opening [1].
C105SR (0.5/1/5/10/50/100 μM, 4 h for hypoxia (1% O2) plus 2 h for reoxygenation (21% O2)) reducing hypoxia/reoxygenation-induced cell death in AML-12 cell[1] .
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
-
Cell Line:AML-12 cell
-
Concentration:0.5/1/10/50/100 μM
-
Incubation Time:4 h for hypoxia (1% O2) plus 2 h for reoxygenation (21% O2)
-
Result:Reduced LDH release and increased cell viability by approximatively 75% at 0.5μM.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Hepatic IRI model [1]
-
Dosage:50 mg/kg
-
Administration:Subcutaneous injection (s.c.)
-
Result:Protected mouse livers against the effects of ischaemia and reperfusion.
Chemical Information
-
Appearance Solid
-
Molecular Weight 633.60
-
Formula C32H33BrN4O3S
-
Color White to light yellow
-
SMILES
O=C([C@@H](NC(NCC1=CC2=C(NCCC2)C=C1)=O)C3=CC(Br)=CC=C3OC)N4[C@@H](C5=C6C(C=CS6)=CC=C5)CCC4
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
In Vitro:
DMSO : 250 mg/mL (394.57 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Protocols
-
Apoptosis
Apoptosis, also called programmed cell death, is generally characterized by distinct morphological characteristics.
-
TUNEL staining for apoptotic DNA fragmentation
TUNEL staining detects DNA strand breaks by using terminal deoxynucleotidyl transferase to add labeled nucleotides to exposed 3′-OH DNA termini, generating either microscopic staining in fixed cells or tissue sections, or fluorescence/cytometric signal in cell suspensions. TUNEL positivity reflects DNA fragmentation but should not be interpreted alone as definitive apoptosis, because TUNEL can also label necrotic, autolytic, mechanically damaged, or DNA-repair-associated DNA breaks.
-
Annexin V plus membrane-impermeant dye apoptosis staining
Annexin V-based apoptosis assays rely on the detection of phosphatidylserine (PS) externalization from the inner leaflet of the plasma membrane to the outer leaflet, an early biochemical hallmark of apoptosis. Fluorescently labeled Annexin V binds PS in a calcium-dependent manner, enabling identification of early apoptotic cells by flow cytometry or fluorescence microscopy. When combined with a membrane-impermeant DNA-binding dye (e. g. , propidium iodide), this approach allows discrimination between viable (Annexin V−/dye−), early apoptotic (Annexin V+/dye−), and late apoptotic or necrotic (Annexin V+/dye+) cell populations by assessing membrane integrity and PS exposure.
-
Transepithelial/transendothelial electrical resistance assay
TEER measures electrical resistance across epithelial or endothelial monolayers cultured on permeable supports, and the readout reflects ionic conductance through the cell barrier, especially the paracellular pathway regulated by junctional integrity. TEER can be measured without destroying the monolayer and is commonly used before or during transport, permeability, barrier-disruption, and barrier-maturation experiments. TEER values are influenced by biological maturation and technical conditions; reported factors include temperature, medium formulation, passage number, electrode geometry, membrane properties, and junctional length during early monolayer maturation. Therefore, TEER should be interpreted with blank-insert subtraction, area normalization, repeated readings, and, when possible, orthogonal barrier readouts such as FITC-dextran flux or tight-junction staining.
-
Apoptosis Solutions
Apoptosis is a regulated, generally non-lytic cell-death pathway that removes unwanted, damaged, infected, or abnormal cells through coordinated morphological changes, caspase activation, DNA fragmentation, and membrane remodeling. The intrinsic apoptosis pathway is controlled mainly by mitochondrial outer membrane permeabilization, BCL-2 family proteins, cytochrome c release, apoptosome formation, caspase-9 activation, and downstream executioner caspase-3/7 activation. The extrinsic apoptosis pathway is initiated by death receptors such as Fas, TNFR, and TRAIL receptors, which recruit adaptor proteins and activate caspase-8 before engaging executioner caspases or mitochondrial amplification through BID cleavage. Apoptosis is linked to many phenotypes, including cancer cell killing, tissue homeostasis, immune regulation, neurodegeneration, infection response, and treatment-induced cytotoxicity; unresolved questions include how apoptosis interacts with necroptosis, pyroptosis, ferroptos
-
How to Choose the Right Model Animal
Choosing the right model animal is a validity-driven decision in which the species, strain, sex, age, genetic background, disease-induction method, outcome measures, and welfare burden must match the scientific question rather than laboratory tradition or convenience. A model should be selected by judging face validity, construct validity, and predictive validity: whether it resembles the human phenotype, whether it reproduces relevant mechanisms, and whether results are likely to predict human biology or treatment response. Animal studies often fail to translate because of species differences, weak disease resemblance, poor experimental design, inadequate reporting, publication bias, and underuse of randomization, blinding, and sample-size justification. Unresolved questions include how to rank competing models objectively, how much human-disease complexity must be reproduced for a given objective, and when non-animal systems such as organoids, ex vivo tissue, or computational models
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.5783 mL | 7.8914 mL | 15.7828 mL | 39.4571 mL |
| 5 mM | 0.3157 mL | 1.5783 mL | 3.1566 mL | 7.8914 mL | |
| 10 mM | 0.1578 mL | 0.7891 mL | 1.5783 mL | 3.9457 mL | |
| 15 mM | 0.1052 mL | 0.5261 mL | 1.0522 mL | 2.6305 mL | |
| 20 mM | 0.0789 mL | 0.3946 mL | 0.7891 mL | 1.9729 mL | |
| 25 mM | 0.0631 mL | 0.3157 mL | 0.6313 mL | 1.5783 mL | |
| 30 mM | 0.0526 mL | 0.2630 mL | 0.5261 mL | 1.3152 mL | |
| 40 mM | 0.0395 mL | 0.1973 mL | 0.3946 mL | 0.9864 mL | |
| 50 mM | 0.0316 mL | 0.1578 mL | 0.3157 mL | 0.7891 mL | |
| 60 mM | 0.0263 mL | 0.1315 mL | 0.2630 mL | 0.6576 mL | |
| 80 mM | 0.0197 mL | 0.0986 mL | 0.1973 mL | 0.4932 mL | |
| 100 mM | 0.0158 mL | 0.0789 mL | 0.1578 mL | 0.3946 mL |