Phenidone
Based on 1 Customer Validation
Phenidone, an orally active dual inhibitor of cyclooxygenase (COX) and lipoxygenase (LOX), ameliorates rat paralysis in experimental autoimmune encephalomyelitis. Phenidone is a potent hypotensive agent in the spontaneously hypertensive rat. Phenidone is used as a photographic developer.
For research use only. We do not sell to patients.
- Purity: 98.96%
- CAS No.: 92-43-3
- Formula: C9H10N2O
- Molecular Weight:162.19
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Immunology/Inflammation Compound Library
HY-L007
-
Metabolism/Protease Compound Library
HY-L012
-
Anti-Aging Compound Library
HY-L034
-
Anti-Cardiovascular Disease Compound Library
HY-L046
-
Ferroptosis Compound Library
HY-L051
-
Orally Active Compound Library
HY-L061
-
Lipid Metabolism Compound Library
HY-L091
-
Human Metabolite Library
HY-L123
-
Heterocyclic Compound Library
HY-L138
-
Metabolic Enzyme Compound Library
HY-L146
-
Multi-Target Compound Library
HY-L176
-
Radioprotector Library
HY-L178
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Anti-Fibrosis Compound Library
HY-L185
-
High-Throughput Bioactive Compound Library
HY-L205
-
Anti-Rheumatic Arthritis Compound Library
HY-L210
-
Mass Spectrometry Human Metabolite Library
HY-L215
Biological Activity
|
COX |
LOX |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| RBL-1 | IC50 |
0.48 μM
Compound: Phenidone (6)
|
Inhibition of 5-Lipoxygenase of rat basophilic leukemia cells
Inhibition of 5-Lipoxygenase of rat basophilic leukemia cells
|
10.1016/S0960-894X(00)80622-8 |
| RBL-1 | IC50 |
0.57 μM
Compound: Phenidone
|
Ability to inhibit 5-lipoxygenase by using a crude preparation of the cytosolic enzyme from the rat basophilic leukemia (RBL-1) cell line
Ability to inhibit 5-lipoxygenase by using a crude preparation of the cytosolic enzyme from the rat basophilic leukemia (RBL-1) cell line
|
[PMID: 2104936] |
| RBL-1 | IC50 |
1.0 x 10-6M
Compound: phenidone
|
In vitro inhibition against 5-lipoxygenase in RBL-1 cells was determined
In vitro inhibition against 5-lipoxygenase in RBL-1 cells was determined
|
[PMID: 8254620] |
| RBL-1 | IC50 |
1.9 μM
Compound: 1 phenidone
|
Inhibition of 5-lipoxygenase catalysis in rat basophilic leukemia (RBL) cells by measuring 5-HETE product formation
Inhibition of 5-lipoxygenase catalysis in rat basophilic leukemia (RBL) cells by measuring 5-HETE product formation
|
[PMID: 8831760] |
| RBL-1 | IC50 |
1.9 μM
Compound: Phenidone
|
In vitro inhibition of 5-lipoxygenase activity in RBL-1 cells.
In vitro inhibition of 5-lipoxygenase activity in RBL-1 cells.
|
10.1016/S0960-894X(00)80236-X |
| RBL-1 | IC50 |
2.1 μM
Compound: phenidone
|
In vitro inhibition of RBL-1 5-lipoxygenase; Value ranges from 1.07-5.54
In vitro inhibition of RBL-1 5-lipoxygenase; Value ranges from 1.07-5.54
|
[PMID: 3681891] |
| RBL-1 | IC50 |
2.1 μM
Compound: Phenidone
|
In vitro inhibitory activity against RBL-1 5-LO
In vitro inhibitory activity against RBL-1 5-LO
|
[PMID: 3820229] |
| RBL-1 | IC50 |
2.54 μM
Compound: Phenidone
|
In vitro inhibitory concentration against 5-lipoxygenase in RBL-1 cells
In vitro inhibitory concentration against 5-lipoxygenase in RBL-1 cells
|
[PMID: 11277534] |
| RBL-1 | IC50 |
5.9 μM
Compound: Phenidone
|
Inhibition of rat basophilic leukemia-1 (RBL-1) 5-lipoxygenase
Inhibition of rat basophilic leukemia-1 (RBL-1) 5-lipoxygenase
|
[PMID: 3806609] |
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 92-43-3
-
Appearance Solid
-
Molecular Weight 162.19
-
Formula C9H10N2O
-
Color Off-white to light yellow
-
SMILES
O=C1NN(C2=CC=CC=C2)CC1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvent & Solubility
DMSO : 100 mg/mL (616.56 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 3.33 mg/mL (20.53 mM; ultrasonic and warming and heat to 60°C)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (30.83 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (30.83 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (624 KB)
- English - EN (624 KB)
- Français - FR (624 KB)
- Deutsch - DE (624 KB)
- Norwegian - NO (624 KB)
- Español - ES (624 KB)
- Swedish - SV (624 KB)
- Italian - IT (624 KB)
- Korean - KR (624 KB)
- Portuguese - PT (624 KB)
-
Handling Instructions (2659 KB)
References
[1]. Moon C, et al. Phenidone, a dual inhibitor of cyclooxygenases and lipoxygenases, ameliorates rat paralysis in experimental autoimmune encephalomyelitis by suppressing its target enzymes. Brain Res. 2005;1035(2):206-210. [Content Brief]
[2]. Stern N, et al. The lipoxygenase inhibitor phenidone is a potent hypotensive agent in the spontaneously hypertensive rat. Am J Hypertens. 1993;6(1):52-58. [Content Brief]
[3]. Petrakiev A, et al. Emission spectral analysis using photographic plates treated with a phenidone developer. Talanta. 1969;16(12):1583-1587. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 6.1656 mL | 30.8280 mL | 61.6561 mL | 154.1402 mL |
| 5 mM | 1.2331 mL | 6.1656 mL | 12.3312 mL | 30.8280 mL | |
| 10 mM | 0.6166 mL | 3.0828 mL | 6.1656 mL | 15.4140 mL | |
| 15 mM | 0.4110 mL | 2.0552 mL | 4.1104 mL | 10.2760 mL | |
| 20 mM | 0.3083 mL | 1.5414 mL | 3.0828 mL | 7.7070 mL | |
| DMSO | 25 mM | 0.2466 mL | 1.2331 mL | 2.4662 mL | 6.1656 mL |
| 30 mM | 0.2055 mL | 1.0276 mL | 2.0552 mL | 5.1380 mL | |
| 40 mM | 0.1541 mL | 0.7707 mL | 1.5414 mL | 3.8535 mL | |
| 50 mM | 0.1233 mL | 0.6166 mL | 1.2331 mL | 3.0828 mL | |
| 60 mM | 0.1028 mL | 0.5138 mL | 1.0276 mL | 2.5690 mL | |
| 80 mM | 0.0771 mL | 0.3854 mL | 0.7707 mL | 1.9268 mL | |
| 100 mM | 0.0617 mL | 0.3083 mL | 0.6166 mL | 1.5414 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Phenidone Related Classifications
HY-W010144 Related Classifications
Powered by Bioz