Ceftizoxime
Based on 1 publication(s) in Google Scholar
Ceftizoxime is a bacterial inhibitor which acts by interfering with bacterial cell wall synthesis and inhibiting cross-linking of the peptidoglycan.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.81%
- CAS No.: 68401-81-0
- Formule: C13H13N5O5S2
- Masse moléculaire:383.40
-
Stockage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications Citing Use of MedChemExpress (MCE) Ceftizoxime
MoreVoir tous les produits spécifiques à Isoform Antibiotic
More
Activité biologique
|
β-lactam |
Ceftizoxime is a new parenteral cephalosporin derivative which is more active against various gram-negative bacilli, including the opportunistic pathogens such as Enterobacter, Citrobacter species, and Serratia marcescens, than cephalosporins and cephamycins such as cefotiam, cefamandole, cefuroxime, cefotaxime, and cefmetazole. Ceftizoxime shows a broad spectrum of antibacterial activity against aerobic gram-positive and gram-negative bacteria[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 68401-81-0
-
Appearance Solid
-
Masse moléculaire 383.40
-
Formule C13H13N5O5S2
-
Color White to off-white
-
SMILES
O=C(C(N12)=CCS[C@]2([H])[C@H](NC(/C(C3=CSC(N)=N3)=N\OC)=O)C1=O)O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
2023 Mar 22;14(1):1594. PMID: 36949052
Solvant et solubilité
DMSO : 25 mg/mL (65.21 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.52 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.52 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
Rats[2]
The animals used in this study include 6-week-old male JCL:ICR strain mice, 6-week-old male JCL:SD strain rats, 7.5- to 15.0-kg male beagle dogs, and 5.8- to 9.1-kg male rhesus monkeys. Ceftizoxime for injection is dissolved in 0.9% saline. Ceftizoxime is given in a dose of 20 mg/kg to all test animals. The volumes are: 0.25 mL per animal by the intravenous (i.v.) and subcutaneous routes to mice; 5 mL/kg of body weight by the intramuscular (i.m.) and i.v. routes to rats; and 0.5 mL/kg of body weight by the i.m. and i.v. routes to dogs and monkeys[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (280 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Kamimura T, et al. Ceftizoxime (Ceftizoxime), a new parenteral cephalosporin: in vitro and in vivo antibacterial activities. Antimicrob Agents Chemother. 1979 Nov;16(5):540-8. [Content Brief]
[2]. Murakawa T, et al. Pharmacokinetics of ceftizoxime in animals after parenteral dosing. Antimicrob Agents Chemother. 1980 Feb;17(2):157-64. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6082 mL | 13.0412 mL | 26.0824 mL | 65.2061 mL |
| 5 mM | 0.5216 mL | 2.6082 mL | 5.2165 mL | 13.0412 mL | |
| 10 mM | 0.2608 mL | 1.3041 mL | 2.6082 mL | 6.5206 mL | |
| 15 mM | 0.1739 mL | 0.8694 mL | 1.7388 mL | 4.3471 mL | |
| 20 mM | 0.1304 mL | 0.6521 mL | 1.3041 mL | 3.2603 mL | |
| 25 mM | 0.1043 mL | 0.5216 mL | 1.0433 mL | 2.6082 mL | |
| 30 mM | 0.0869 mL | 0.4347 mL | 0.8694 mL | 2.1735 mL | |
| 40 mM | 0.0652 mL | 0.3260 mL | 0.6521 mL | 1.6302 mL | |
| 50 mM | 0.0522 mL | 0.2608 mL | 0.5216 mL | 1.3041 mL | |
| 60 mM | 0.0435 mL | 0.2174 mL | 0.4347 mL | 1.0868 mL |