USP7-IN-3
Based on 2 publication(s) in Google Scholar
USP7-IN-3 (Compound 5) is an effective and selective allosteric inhibitor of ubiquitin-specific protease 7 (USP7). USP7-IN-3 can be used for research on acute lymphoblastic leukemia.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 99.06%
- CAS. Nr.: 2202738-42-7
- Formel: C29H31F3N6O3
- Molecular Weight:568.59
-
Speicherung:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
HY-138794
XL177AUSP7 Inhibitor -
HY-136910
USP7-797USP7 Inhibitor -
HY-122886
XL 188USP7 Inhibitor -
HY-15667
P005091USP7 Inhibitor -
HY-134817
USP7-IN-8USP7 Inhibitor -
HY-13865
P 22077USP7/47 Inhibitor -
HY-50737A
DUB-IN-2Deubiquitinase Inhibitor -
HY-17543
ML-323USP1-UAF1 Inhibitor -
HY-112438
MF-094USP30 Inhibitor -
HY-117370
USP25/28 inhibitor AZ1Deubiquitinase Inhibitor -
HY-100900
ML364USP2 Inhibitor -
HY-13814
PR-619DUB Inhibitor
Publications Citing Use of MedChemExpress (MCE) USP7-IN-3
More
Biologische Aktivität
Beschreibung
IC50 & Target
USP7[1]
In Vitro
USP7-IN-3 (50 nM, 2 hours) can reduce MDM2 levels in HCT116 cells and upregulate p53 expression, indicating that it activates the p53 signaling pathway through USP7 inhibition[1]. USP7-IN-3 (2 nM, 72 hours) can inhibit the proliferation of RS4;11 cells, demonstrating its high selectivity and efficacy against acute lymphoblastic leukemia cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
-
Cell Line:RS4;11 cells (acute lymphoblastic leukemia)
-
Concentration:2 nM
-
Incubation Time:72 hours
-
Result:Significantly reduced the viability of RS4;11 cells.
-
Cell Line:HCT116 cells (colon cancer)
-
Concentration:50 nM
-
Incubation Time:2 hours
-
Result:Significantly decreased MDM2 levels and increased p53 expression.
Chemical Information
-
CAS. Nr. 2202738-42-7
-
Appearance Solid
-
Molecular Weight 568.59
-
Formel C29H31F3N6O3
-
Color White to off-white
-
SMILES
O=C(N1CCC(CN2C(C3=NN(C)C(C4=CC=C(CN)C=C4)=C3N=C2)=O)(O)CC1)C[C@@H](C(F)(F)F)C5=CC=CC=C5
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
Targeted degradation of USP7 in solid cancer cells reveals distinct effects of deubiquitinase degraders and inhibitors. [Abstract]2026 May 13;17(1):4331. PMID: 42129197 -
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 90 mg/mL (158.29 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 4.5 mg/mL (7.91 mM); Clear solution
This protocol yields a clear solution of ≥ 4.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (45.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 4.5 mg/mL (7.91 mM); Clear solution
This protocol yields a clear solution of ≥ 4.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (45.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7587 mL | 8.7937 mL | 17.5874 mL | 43.9684 mL |
| 5 mM | 0.3517 mL | 1.7587 mL | 3.5175 mL | 8.7937 mL | |
| 10 mM | 0.1759 mL | 0.8794 mL | 1.7587 mL | 4.3968 mL | |
| 15 mM | 0.1172 mL | 0.5862 mL | 1.1725 mL | 2.9312 mL | |
| 20 mM | 0.0879 mL | 0.4397 mL | 0.8794 mL | 2.1984 mL | |
| 25 mM | 0.0703 mL | 0.3517 mL | 0.7035 mL | 1.7587 mL | |
| 30 mM | 0.0586 mL | 0.2931 mL | 0.5862 mL | 1.4656 mL | |
| 40 mM | 0.0440 mL | 0.2198 mL | 0.4397 mL | 1.0992 mL | |
| 50 mM | 0.0352 mL | 0.1759 mL | 0.3517 mL | 0.8794 mL | |
| 60 mM | 0.0293 mL | 0.1466 mL | 0.2931 mL | 0.7328 mL | |
| 80 mM | 0.0220 mL | 0.1099 mL | 0.2198 mL | 0.5496 mL | |
| 100 mM | 0.0176 mL | 0.0879 mL | 0.1759 mL | 0.4397 mL |
USP7-IN-3 Related Classifications
HY-112128 Related Classifications
Powered by Bioz