UCB9386
Based on 1 Customer Validation
UCB9386 is the selective and brain penetrant inhibitor for Nuak1 with a pIC50 of 10.1. UCB9386 inhibits Nuak2 and Kak2 with an inhibition rate of ca. 50% at 10 nM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.89%
- CAS No.: 3096082-93-5
- Formule: C27H26N8O
- Masse moléculaire:478.55
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Voir tous les produits spécifiques à Isoform AMPK
More
Activité biologique
Chemical Information
-
CAS No. 3096082-93-5
-
Appearance Solid
-
Masse moléculaire 478.55
-
Formule C27H26N8O
-
Color Light yellow to yellow
-
SMILES
C[C@H](C1=CC=CC=C1)N(C(C(N2CC3(CN(C)C3)C2)=N4)=O)C5=C4C=NC(C6=CN=C7C=CC=NN76)=C5
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 83.33 mg/mL (174.13 mM; ultrasonic and adjust pH to 7 with 1 M HCl; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 8.33 mg/mL (17.41 mM); Clear solution
This protocol yields a clear solution of ≥ 8.33 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (83.3 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 8.33 mg/mL (17.41 mM); Clear solution
This protocol yields a clear solution of ≥ 8.33 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (83.3 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0896 mL | 10.4482 mL | 20.8965 mL | 52.2411 mL |
| 5 mM | 0.4179 mL | 2.0896 mL | 4.1793 mL | 10.4482 mL | |
| 10 mM | 0.2090 mL | 1.0448 mL | 2.0896 mL | 5.2241 mL | |
| 15 mM | 0.1393 mL | 0.6965 mL | 1.3931 mL | 3.4827 mL | |
| 20 mM | 0.1045 mL | 0.5224 mL | 1.0448 mL | 2.6121 mL | |
| 25 mM | 0.0836 mL | 0.4179 mL | 0.8359 mL | 2.0896 mL | |
| 30 mM | 0.0697 mL | 0.3483 mL | 0.6965 mL | 1.7414 mL | |
| 40 mM | 0.0522 mL | 0.2612 mL | 0.5224 mL | 1.3060 mL | |
| 50 mM | 0.0418 mL | 0.2090 mL | 0.4179 mL | 1.0448 mL | |
| 60 mM | 0.0348 mL | 0.1741 mL | 0.3483 mL | 0.8707 mL | |
| 80 mM | 0.0261 mL | 0.1306 mL | 0.2612 mL | 0.6530 mL | |
| 100 mM | 0.0209 mL | 0.1045 mL | 0.2090 mL | 0.5224 mL |
UCB9386 Related Classifications
HY-170360 Related Classifications
Powered by Bioz