CYD-2-11
Based on 1 Customer Validation
CYD-2-11 is a selective Bax agonist with a Ki value of 34.1 nM. CYD-2-11 induces cell apoptosis and shows antiproliferative activity to breast cancer MDA-MB-231 and MCF-7 cell lines with IC50 values of 3.22 and 3.81 μM, respectively. CYD-2-11 suppresses tumor growth in MDA-MB-231 tumor models. CYD-2-11 can be used for the research of breast and lung cancer.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.92%
- CAS. Nr.: 1425944-22-4
- Formel: C22H18N2O3
- Molecular Weight:358.39
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
CYD-2-11 (0-100 μM; 48 h) shows anti-proliferation effects to breast cancer cells[1]. CYD-2-11 (5 μM; 48 h) selectively binds to Bax protein and induces apoptosis in NSCLC and SCLC cell lines[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:T47D, MCF-7, MDA-MB-231, MDA-MB-468 and MCF-10A cell lines
-
Concentration:0.01, 0.1, 1, 5, 10 and 100 µM
-
Incubation Time:48 hours
-
Result:Inhibited cell proliferation of T47D, MCF-7, MDA-MB-231, MDA-MB-468 and MCF-10A cells with IC50 values of 4.37, 9.47, 3.81, 3.22 and 8.73 μM, respectively.
-
Cell Line:SCLC and NSCLC cell lines
-
Concentration:5 µM
-
Incubation Time:48 hours
-
Result:Induced cell apoptosis in both SCLC and NSCLC cells with a higher effect than SMBA1.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female nude mice with MDA-MB-231 tumor xenografts[1]
-
Dosage:20 mg/kg
-
Administration:Intraperitoneal injection; 20 mg/kg; once daily for 7 days
-
Result:Exhibited a 57% inhibition rate of MDA-MB-231 tumor growth in vivo.
Chemical Information
-
CAS. Nr. 1425944-22-4
-
Appearance Solid
-
Molecular Weight 358.39
-
Formel C22H18N2O3
-
Color Light yellow to yellow
-
SMILES
NCCOC1=CC=CC=C1/C=C2C3=C(C=CC([N+]([O-])=O)=C3)C4=C/2C=CC=C4
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 50 mg/mL (139.51 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.98 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (283 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Liu G, et al. Structure-activity relationship studies on Bax activator SMBA1 for the treatment of ER-positive and triple-negative breast cancer. Eur J Med Chem. 2019 Sep 15;178:589-605. [Content Brief]
[2]. Li R, et al. Modulation of Bax and mTOR for Cancer Therapeutics. Cancer Res. 2017 Jun 1;77(11):3001-3012. doi: 10.1158/0008-5472.CAN-16-2356. Epub 2017 Apr 5. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7903 mL | 13.9513 mL | 27.9026 mL | 69.7564 mL |
| 5 mM | 0.5581 mL | 2.7903 mL | 5.5805 mL | 13.9513 mL | |
| 10 mM | 0.2790 mL | 1.3951 mL | 2.7903 mL | 6.9756 mL | |
| 15 mM | 0.1860 mL | 0.9301 mL | 1.8602 mL | 4.6504 mL | |
| 20 mM | 0.1395 mL | 0.6976 mL | 1.3951 mL | 3.4878 mL | |
| 25 mM | 0.1116 mL | 0.5581 mL | 1.1161 mL | 2.7903 mL | |
| 30 mM | 0.0930 mL | 0.4650 mL | 0.9301 mL | 2.3252 mL | |
| 40 mM | 0.0698 mL | 0.3488 mL | 0.6976 mL | 1.7439 mL | |
| 50 mM | 0.0558 mL | 0.2790 mL | 0.5581 mL | 1.3951 mL | |
| 60 mM | 0.0465 mL | 0.2325 mL | 0.4650 mL | 1.1626 mL | |
| 80 mM | 0.0349 mL | 0.1744 mL | 0.3488 mL | 0.8720 mL | |
| 100 mM | 0.0279 mL | 0.1395 mL | 0.2790 mL | 0.6976 mL |
CYD-2-11 Related Classifications
HY-120275 Related Classifications
Powered by Bioz