Deltaflexin3
Deltaflexin3 is a potent PDE6D inhibitor. Deltaflexin3 reduces the signaling of Ras and selectively decreases the KRAS mutant and PDE6D-dependent cancer cells growth.
For research use only. We do not sell to patients.
- CAS No.: 2767277-64-3
- Formula: C25H36FN5O2
- Molecular Weight:457.58
-
Storage:
Please store the product under the recommended conditions in the Certificate of Analysis.
Biological Activity
Description
Chemical Information
-
CAS No. 2767277-64-3
-
Molecular Weight 457.58
-
Formula C25H36FN5O2
-
SMILES
O=C(N(CCCCCCC(N(CC)CC1=NC(NC)=NC=C1)=O)C(C)C)C2=CC=C(F)C=C2
-
Synonyms
A-442b
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Please store the product under the recommended conditions in the Certificate of Analysis.
Solvent & Solubility
In Vitro:
DMSO : 100 mg/mL (218.54 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.46 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.46 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
References
Complete Stock Solution Preparation Table
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1854 mL | 10.9271 mL | 21.8541 mL | 54.6353 mL |
| 5 mM | 0.4371 mL | 2.1854 mL | 4.3708 mL | 10.9271 mL | |
| 10 mM | 0.2185 mL | 1.0927 mL | 2.1854 mL | 5.4635 mL | |
| 15 mM | 0.1457 mL | 0.7285 mL | 1.4569 mL | 3.6424 mL | |
| 20 mM | 0.1093 mL | 0.5464 mL | 1.0927 mL | 2.7318 mL | |
| 25 mM | 0.0874 mL | 0.4371 mL | 0.8742 mL | 2.1854 mL | |
| 30 mM | 0.0728 mL | 0.3642 mL | 0.7285 mL | 1.8212 mL | |
| 40 mM | 0.0546 mL | 0.2732 mL | 0.5464 mL | 1.3659 mL | |
| 50 mM | 0.0437 mL | 0.2185 mL | 0.4371 mL | 1.0927 mL | |
| 60 mM | 0.0364 mL | 0.1821 mL | 0.3642 mL | 0.9106 mL | |
| 80 mM | 0.0273 mL | 0.1366 mL | 0.2732 mL | 0.6829 mL | |
| 100 mM | 0.0219 mL | 0.1093 mL | 0.2185 mL | 0.5464 mL |