Fradafiban
Fradafiban is a nonpeptide platelet glycoprotein IIb/IIIa antagonist, which binds to the human platelet GP IIb/IIIa complex with a Kd value of 148 nM.
Para uso exclusivo en investigación. No vendemos a pacientes.
- No. CAS: 148396-36-5
- Fòrmula: C20H21N3O4
- Peso molecular:367.40
-
Almacenamiento:
Please store the product under the recommended conditions in the Certificate of Analysis.
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
Kd: 148 nM (human platelet GP IIb/IIIa complex)[1]
Fradafiban is a nonpeptide mimetic of the arginine-glycine-aspartic acid recognition sequence. Fradafiban binds with high affinity and selectivity to the human platelet GP IIb/IIIa complex and potently inhibits human platelet aggregation in vitro. Fradafiban reversibly binds to the human platelet GP IIb/IIIa complex with a Kd value of 148 nM[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 148396-36-5
-
Peso molecular 367.40
-
Fòrmula C20H21N3O4
-
SMILES
O=C(O)C[C@H]1C(N[C@H](COC2=CC=C(C3=CC=C(C(N)=N)C=C3)C=C2)C1)=O
-
Synonyms
BIBU-52
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Please store the product under the recommended conditions in the Certificate of Analysis.
Solvente y solubilidad
DMSO : 180 mg/mL (489.93 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.25 mg/mL (6.12 mM); Clear solution
This protocol yields a clear solution of ≥ 2.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (22.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.25 mg/mL (6.12 mM); Clear solution
This protocol yields a clear solution of ≥ 2.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (22.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
Referencias
Complete Stock Solution Preparation Table
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7218 mL | 13.6091 mL | 27.2183 mL | 68.0457 mL |
| 5 mM | 0.5444 mL | 2.7218 mL | 5.4437 mL | 13.6091 mL | |
| 10 mM | 0.2722 mL | 1.3609 mL | 2.7218 mL | 6.8046 mL | |
| 15 mM | 0.1815 mL | 0.9073 mL | 1.8146 mL | 4.5364 mL | |
| 20 mM | 0.1361 mL | 0.6805 mL | 1.3609 mL | 3.4023 mL | |
| 25 mM | 0.1089 mL | 0.5444 mL | 1.0887 mL | 2.7218 mL | |
| 30 mM | 0.0907 mL | 0.4536 mL | 0.9073 mL | 2.2682 mL | |
| 40 mM | 0.0680 mL | 0.3402 mL | 0.6805 mL | 1.7011 mL | |
| 50 mM | 0.0544 mL | 0.2722 mL | 0.5444 mL | 1.3609 mL | |
| 60 mM | 0.0454 mL | 0.2268 mL | 0.4536 mL | 1.1341 mL | |
| 80 mM | 0.0340 mL | 0.1701 mL | 0.3402 mL | 0.8506 mL | |
| 100 mM | 0.0272 mL | 0.1361 mL | 0.2722 mL | 0.6805 mL |
Fradafiban Related Classifications
HY-101720 Related Classifications
Powered by Bioz