Integrin modulator 1
Based on 2 publication(s) in Google Scholar
Integrin modulator 1 is a potent and selective α4β1 integrin agonist, with an IC50 of 9.8 nM for RGD-binding α4β1. Integrin modulator 1 increases cell adhesion mediated by α4β1 integrin, with an EC50 of 12.9 nM.
For research use only. We do not sell to patients.
- Purity: 99.80%
- CAS No.: 2023788-32-9
- Formula: C13H14N2O4
- Molecular Weight:262.26
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Immunology/Inflammation Compound Library
HY-L007
-
Cytoskeleton Compound Library
HY-L060
-
Targeted Diversity Library
HY-L099
-
Heterocyclic Compound Library
HY-L138
-
Membrane Protein-targeted Compound Library
HY-L149
-
Highly Selective Activators Library
HY-L159
-
Extracellular Vesicles (EVs) Compound Library
HY-L168
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
3D Diverse Fragment Library
HY-L903
Publications Citing Use of MedChemExpress (MCE) Integrin modulator 1
More
Biological Activity
|
α4β1 9.8 nM (IC50) |
Integrin modulator 1 (2-10 μg/mL; 30 min) significantly increases Jurkat E6.1 cell adhesion[1].
Integrin modulator 1 (1-100 nM; 1 h) strongly and significantly increases ERK1/2 phosphorylation in Jurkat E6.1 cells[1].
Integrin modulator 1 (1 nM-10 μM; 30 min) significantly increases the binding of HUTS-21 antibody to Jurkat E6.1 cells in a concentration-dependent manner[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2023788-32-9
-
Appearance Solid
-
Molecular Weight 262.26
-
Formula C13H14N2O4
-
Color White to off-white
-
SMILES
O=C(CC(N1C(NC2=CC=CC=C2C)=O)CC1=O)O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Blood Adv
VLA-4 agonist promotes engraftment and immune reconstitution of allogeneic hematopoietic stem cells. [Abstract]2026 May 12;10(9):3103-3117. PMID: 41758999 -
Sci Rep
Strictosamide and mitraphylline inhibit cancer cell motility by suppressing epithelial-mesenchymal transition via integrin α4-mediated signaling. [Abstract]2025 Jul 2;15(1):22807. PMID: 40594088
Solvent & Solubility
DMSO : 100 mg/mL (381.30 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (19.07 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (19.07 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.8130 mL | 19.0650 mL | 38.1301 mL | 95.3252 mL |
| 5 mM | 0.7626 mL | 3.8130 mL | 7.6260 mL | 19.0650 mL | |
| 10 mM | 0.3813 mL | 1.9065 mL | 3.8130 mL | 9.5325 mL | |
| 15 mM | 0.2542 mL | 1.2710 mL | 2.5420 mL | 6.3550 mL | |
| 20 mM | 0.1907 mL | 0.9533 mL | 1.9065 mL | 4.7663 mL | |
| 25 mM | 0.1525 mL | 0.7626 mL | 1.5252 mL | 3.8130 mL | |
| 30 mM | 0.1271 mL | 0.6355 mL | 1.2710 mL | 3.1775 mL | |
| 40 mM | 0.0953 mL | 0.4766 mL | 0.9533 mL | 2.3831 mL | |
| 50 mM | 0.0763 mL | 0.3813 mL | 0.7626 mL | 1.9065 mL | |
| 60 mM | 0.0636 mL | 0.3178 mL | 0.6355 mL | 1.5888 mL | |
| 80 mM | 0.0477 mL | 0.2383 mL | 0.4766 mL | 1.1916 mL | |
| 100 mM | 0.0381 mL | 0.1907 mL | 0.3813 mL | 0.9533 mL |
Powered by Bioz