Pirimiphos-methyl
Based on 1 publication(s) in Google Scholar
Pirimiphos-methyl is an organophosphorus insecticide and acaricide that can inhibit AChE in target organisms. Pirimiphos-methyl is often used for prevention and control of beetles, snout beetles, moths and Ephestia cautella during storage of agricultural grains.
For research use only. We do not sell to patients.
- Purity: 98.39%
- CAS No.: 29232-93-7
- Formula: C11H20N3O3PS
- Molecular Weight:305.33
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications Citing Use of MedChemExpress (MCE) Pirimiphos-methyl
MoreAll Parasite Isoforms
More
Biological Activity
|
Mite |
AChE |
Pirimiphos-methyl (1000 μM; 48 h) acts cytotoxic, increases the vitamin E levels, decreases Folate and Thiamine (HY-N0680) derivate levels, in Atlantic salmon hepatocytes[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Atlantic salmon hepatocytes
-
Concentration:0.1, 1.0, 10, 100 and 1000 µM
-
Incubation Time:48 hours
-
Result:Acted cytotoxic and impacts accumulation of lipids (steatosis) at 1000 μM.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Balb/c mice (5 weeks old, weighing ~21.5 g)[4]
-
Dosage:10 mg/kg, 60 mg/kg, or 120 mg/kg/day
-
Administration:Oral administration; once daily; 28 days
-
Result:At autopsy after 28-day exposure, there were significant decreases in relative spleen weight and splenic cellularity found at 120 mg/kg.
The body weight, relative thymic weight, thymic cellularity, and splenic and thymic subsets were not affected.
Significant increases in the production of cytokines (IL-2, IL-4, IL-6, IFN-gamma, and IL-10).
The relative levels of three types of autoantibodies, anti-dsDNA, anti-histone, and antinuclear antibody (ANA) were dose-dependently decreased in serum.
Induced a significant decrease in Immunoglobulin M production capability.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 29232-93-7
-
Appearance Liquid (Density: 1.17 g/cm3)
-
Molecular Weight 305.33
-
Formula C11H20N3O3PS
-
Color Light yellow to yellow
-
SMILES
S=P(OC)(OC)OC1=NC(N(CC)CC)=NC(C)=C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Chemosphere
Toxicity evolution and control for the UV/H2O2 degradation of nitrogen-containing heterocyclic compounds: SDZ and PMM. [Abstract]2023 Oct:338:139541. PMID: 37467855
Solvent & Solubility
DMSO : 50 mg/mL (163.76 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.19 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (8.19 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (597 KB)
- English - EN (597 KB)
- Français - FR (597 KB)
- Deutsch - DE (597 KB)
- Norwegian - NO (597 KB)
- Español - ES (597 KB)
- Swedish - SV (597 KB)
- Italian - IT (597 KB)
- Korean - KR (597 KB)
- Portuguese - PT (597 KB)
-
Handling Instructions (2659 KB)
References
[1]. Shizhuang Weng, et al. Detection of Pirimiphos-Methyl in Wheat Using Surface-Enhanced Raman Spectroscopy and Chemometric Methods. Molecules. 2019 Apr 30;24(9):1691. [Content Brief]
[2]. Pål A Olsvik, et al. In Vitro Toxicity of Pirimiphos-Methyl in Atlantic Salmon Hepatocytes. Toxicol In Vitro. 2017 Mar;39:1-14. [Content Brief]
[3]. Esther Borrás, et al. Atmospheric Degradation of the Organothiophosphate Insecticide - Pirimiphos-methyl. Sci Total Environ. 2017 Feb 1;579:1-9. [Content Brief]
[4]. Kim HS, et al. Evaluation of immunotoxicity induced by pirimiphos-methyl in male Balb/c mice following exposure to for 28 days. J Toxicol Environ Health A. 2007 Aug;70(15-16):1278-87. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2751 mL | 16.3757 mL | 32.7515 mL | 81.8786 mL |
| 5 mM | 0.6550 mL | 3.2751 mL | 6.5503 mL | 16.3757 mL | |
| 10 mM | 0.3275 mL | 1.6376 mL | 3.2751 mL | 8.1879 mL | |
| 15 mM | 0.2183 mL | 1.0917 mL | 2.1834 mL | 5.4586 mL | |
| 20 mM | 0.1638 mL | 0.8188 mL | 1.6376 mL | 4.0939 mL | |
| 25 mM | 0.1310 mL | 0.6550 mL | 1.3101 mL | 3.2751 mL | |
| 30 mM | 0.1092 mL | 0.5459 mL | 1.0917 mL | 2.7293 mL | |
| 40 mM | 0.0819 mL | 0.4094 mL | 0.8188 mL | 2.0470 mL | |
| 50 mM | 0.0655 mL | 0.3275 mL | 0.6550 mL | 1.6376 mL | |
| 60 mM | 0.0546 mL | 0.2729 mL | 0.5459 mL | 1.3646 mL | |
| 80 mM | 0.0409 mL | 0.2047 mL | 0.4094 mL | 1.0235 mL | |
| 100 mM | 0.0328 mL | 0.1638 mL | 0.3275 mL | 0.8188 mL |