Propiverine hydrochloride
Based on 1 Customer Validation
Propiverine hydrochloride is a bladder spasmolytic with calcium antagonistic and anticholinergic properties. Propiverine hydrochloride can be used for the research of overactive blaqdder and urinary incontinence.
For research use only. We do not sell to patients.
- Purity: 99.80%
- CAS No.: 54556-98-8
- Formula: C23H30ClNO3
- Molecular Weight:403.94
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
All Calcium Channel Isoforms
More
Biological Activity
Propiverine (10-3000 nM) inhibits the speci c binding of [3H]NMS, with Kis of 339, 193 and 497 nM in the bladder, submaxillary gland and heart of mice respectively[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Propiverine (0.01-1 mg/kg; i.v.) decreases the UBP and totally suppresses the sneeze reflex at the dose of 1 mg/kg in vivo[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female adult Sprague-Dawley rats (250-270 g)[1]
-
Dosage:5 mg dissolved in distilled water (0.5 mL)
-
Administration:P.o. once daily for 2 weeks
-
Result:Increased urethral baseline pressure (UBP) and leak-point pressure (LPP) significantly.
Increased plasma epinephrine and norepinephrine levels.
No significant changes were observed in body weight.
Chemical Information
-
CAS No. 54556-98-8
-
Appearance Solid
-
Molecular Weight 403.94
-
Formula C23H30ClNO3
-
Color White to off-white
-
SMILES
O=C(C(C1=CC=CC=C1)(C2=CC=CC=C2)OCCC)OC3CCN(CC3)C.[H]Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
DMSO : 50 mg/mL (123.78 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 50 mg/mL (123.78 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.19 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.19 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (247.56 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (615 KB)
- English - EN (615 KB)
- Français - FR (615 KB)
- Deutsch - DE (615 KB)
- Norwegian - NO (615 KB)
- Español - ES (615 KB)
- Swedish - SV (615 KB)
- Italian - IT (615 KB)
- Korean - KR (615 KB)
- Portuguese - PT (615 KB)
-
Handling Instructions (2659 KB)
References
[1]. Kitta T, et, al. Effects of propiverine hydrochloride, an anticholinergic agent, on urethral continence mechanisms and plasma catecholamine concentration in rats. Int Urogynecol J. 2013 Apr; 24(4): 683-8. [Content Brief]
[2]. Ito Y, et, al. Muscarinic Receptor Binding and Plasma Drug Concentration after the Oral Administration of Propiverine in Mice. Low Urin Tract Symptoms. 2010 Apr; 2(1):43-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 2.4756 mL | 12.3781 mL | 24.7562 mL | 61.8904 mL |
| 5 mM | 0.4951 mL | 2.4756 mL | 4.9512 mL | 12.3781 mL | |
| 10 mM | 0.2476 mL | 1.2378 mL | 2.4756 mL | 6.1890 mL | |
| 15 mM | 0.1650 mL | 0.8252 mL | 1.6504 mL | 4.1260 mL | |
| 20 mM | 0.1238 mL | 0.6189 mL | 1.2378 mL | 3.0945 mL | |
| 25 mM | 0.0990 mL | 0.4951 mL | 0.9902 mL | 2.4756 mL | |
| 30 mM | 0.0825 mL | 0.4126 mL | 0.8252 mL | 2.0630 mL | |
| 40 mM | 0.0619 mL | 0.3095 mL | 0.6189 mL | 1.5473 mL | |
| 50 mM | 0.0495 mL | 0.2476 mL | 0.4951 mL | 1.2378 mL | |
| 60 mM | 0.0413 mL | 0.2063 mL | 0.4126 mL | 1.0315 mL | |
| 80 mM | 0.0309 mL | 0.1547 mL | 0.3095 mL | 0.7736 mL | |
| 100 mM | 0.0248 mL | 0.1238 mL | 0.2476 mL | 0.6189 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.