SPEN-IN-1
Based on 1 Customer Validation
SPEN-IN-1 (compound X1) is an inhibitor of SPEN which is a protein factor with a Kd value of 47 nM. SPEN-IN-1 has high selectivity for RepA, a 431-nucleotide domain in Xist (a non-coding RNA prototype) that comprises 8.5 units of a GC-rich motif responsible for gene silencing.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 97.25%
- CAS No.: 2863686-82-0
- 화학식: C27H20N4O
- 분자량:416.47
-
보관:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
All Histone Methyltransferase Isoforms
More
Biological Activity
제품 설명
In Vitro
SPEN-IN-1 (0-100 μM) inhibits RepA-PRC2 and RepA-SPEN interactions with IC50 values of 30 and 48 µM, respectively[1]. SPEN-IN-1 inhibits RepA, PRC2 and SPEN with Kd values of 400, 47 and 420 nM, respecctively[1]. SPEN-IN-1 selectively disrupts the interactions of Xist with cognate proteins in vitro and inside cells[1]. SPEN-IN-1 strongly inhibits H3K27me3 and PRC2 accumulation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2863686-82-0
-
Appearance Solid
-
분자량 416.47
-
화학식 C27H20N4O
-
Color White to off-white
-
SMILES
C1(C2=NC3=CC=CC=C3N2)=NNC4=C1C=C(C5=CC=CC(OCC6=CC=CC=C6)=C5)C=C4
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
용액&용해도
In Vitro:
DMSO : 66.67 mg/mL (160.08 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.00 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (273 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4011 mL | 12.0057 mL | 24.0113 mL | 60.0283 mL |
| 5 mM | 0.4802 mL | 2.4011 mL | 4.8023 mL | 12.0057 mL | |
| 10 mM | 0.2401 mL | 1.2006 mL | 2.4011 mL | 6.0028 mL | |
| 15 mM | 0.1601 mL | 0.8004 mL | 1.6008 mL | 4.0019 mL | |
| 20 mM | 0.1201 mL | 0.6003 mL | 1.2006 mL | 3.0014 mL | |
| 25 mM | 0.0960 mL | 0.4802 mL | 0.9605 mL | 2.4011 mL | |
| 30 mM | 0.0800 mL | 0.4002 mL | 0.8004 mL | 2.0009 mL | |
| 40 mM | 0.0600 mL | 0.3001 mL | 0.6003 mL | 1.5007 mL | |
| 50 mM | 0.0480 mL | 0.2401 mL | 0.4802 mL | 1.2006 mL | |
| 60 mM | 0.0400 mL | 0.2001 mL | 0.4002 mL | 1.0005 mL | |
| 80 mM | 0.0300 mL | 0.1501 mL | 0.3001 mL | 0.7504 mL | |
| 100 mM | 0.0240 mL | 0.1201 mL | 0.2401 mL | 0.6003 mL |
SPEN-IN-1 Related Classifications
HY-152038 Related Classifications
Powered by Bioz