TG100-115
Based on 3 publication(s) in Google Scholar
TG100-115 is a selective PI3Kγ/PI3Kδ inhibitor with IC50s of 83 and 235 nM, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.41%
- CAS No.: 677297-51-7
- Formule: C18H14N6O2
- Masse moléculaire:346.34
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) TG100-115
More
Activité biologique
|
PI3Kγ 83 nM (IC50) |
PI3Kδ 235 nM (IC50) |
TG100-115 inhibits PI3Kγ and PI3Kδ with IC50s of 83 and 235 nM, respectively, whereas both PI3Kα and PI3Kβ are relatively unaffected (IC50 values >1 μM). As a gauge of general specificity, TG100-115 is also assayed against a 133 protein kinase panel, none of which are inhibited at IC50 values <1 μM. TG100-115 potently inhibits edema and inflammation in response to multiple mediators known to participate in myocardial infarction, including vascular endothelial growth factor and platelet-activating factor; by contrast, endothelial cell mitogenesis, a repair process important to tissue survival after ischemic damage[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 677297-51-7
-
Appearance Solid
-
Masse moléculaire 346.34
-
Formule C18H14N6O2
-
Color Light yellow to yellow
-
SMILES
NC1=C(C(N=C2C3=CC(O)=CC=C3)=NC(N)=N1)N=C2C4=CC(O)=CC=C4
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Sci Transl Med
PP2A inhibition is a druggable MEK inhibitor resistance mechanism in KRAS-mutant lung cancer cells. [Abstract]2018 Jul 18;10(450):eaaq1093. PMID: 30021885 -
Acta Pharmacol Sin
TRPM7 kinase inhibitor TG100-115 provides neuroprotection against neonatal hypoxic-ischemic brain injury. [Abstract]2026 Apr 27. PMID: 42045381 -
Molecules
In Vitro and in Vivo Activity of mTOR Kinase and PI3K Inhibitors Against Leishmania donovani and Trypanosoma brucei. [Abstract]2020 Apr 23;25(8):1980. PMID: 32340370
Solvant et solubilité
DMSO : 33.33 mg/mL (96.23 mM; ultrasonic and warming and adjust pH to 2 with HCl and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (7.22 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (7.22 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
PI3K reactions are constructed by using recombinant human kinases, 3 μM ATP, phosphatidylinositol substrate, and cofactors, and reaction progression measured by using a luminescent-based detection system to quantify ATP consumption. Protein kinase assays are performed by using commercial screening services[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Human umbilical vein EC plated in 96-well cluster plates (5,000 cells/well) are cultured in assay medium (containing 0.5% serum and 50 ng/mL VEGF) in the presence or absence of test compounds (e.g., TG100-115) (10 μM), and cell numbers are quantified by XTT assay 24, 48, or 72 h later[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Rats[1]
Sprague-Dawley rats (175-200 g) are dosed i.v. with either TG100-115 (1 mg/kg) or vehicle, and 1-4 h later Evans blue dye is administered i.v. as 500 μl of a 2% sterile saline solution. Immediately after dye injection, animals are injected intradermally on each shaved flank with 100 μL of saline, VEGF (2 μg/mL stock), or histamine (10 μg/mL stock). Thirty minutes later, injection sites are photographed.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (281 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8873 mL | 14.4367 mL | 28.8734 mL | 72.1834 mL |
| 5 mM | 0.5775 mL | 2.8873 mL | 5.7747 mL | 14.4367 mL | |
| 10 mM | 0.2887 mL | 1.4437 mL | 2.8873 mL | 7.2183 mL | |
| 15 mM | 0.1925 mL | 0.9624 mL | 1.9249 mL | 4.8122 mL | |
| 20 mM | 0.1444 mL | 0.7218 mL | 1.4437 mL | 3.6092 mL | |
| 25 mM | 0.1155 mL | 0.5775 mL | 1.1549 mL | 2.8873 mL | |
| 30 mM | 0.0962 mL | 0.4812 mL | 0.9624 mL | 2.4061 mL | |
| 40 mM | 0.0722 mL | 0.3609 mL | 0.7218 mL | 1.8046 mL | |
| 50 mM | 0.0577 mL | 0.2887 mL | 0.5775 mL | 1.4437 mL | |
| 60 mM | 0.0481 mL | 0.2406 mL | 0.4812 mL | 1.2031 mL | |
| 80 mM | 0.0361 mL | 0.1805 mL | 0.3609 mL | 0.9023 mL |
TG100-115 Related Classifications
HY-10111 Related Classifications
Powered by Bioz