Cefathiamidine
Based on 1 Customer Validation
Cefathiamidine is a first-generation cephalosporin antibacterial agent and is used to treat infections caused by susceptible bacteria. Cefathiamidine exhibits a wide spectrum of antimicrobial activity against bacteria. Cefathiamidine is used for the treatment of respiratory, liver, five senses, urinary tract infections, endocarditis and sepsis.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 99.65%
- CAS. Nr.: 33075-00-2
- Formel: C19H28N4O6S2
- Molecular Weight:472.58
-
Speicherung:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Alle Antibiotic Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
Beschreibung
IC50 & Target
|
β-lactam |
In Vitro
The in-vitro activity of Cefathiamidine against Streptococcus faecalis and Streptococcus faecium are studied in comparison with other β-lactams. All the 56 strains of Str. faecalis tested are inhibited by 2 mg/L of Cefathiamidine. The MBCs of Cefathiamidine and Ampicillin for ten strains of Str. faecalis show that the ratios of MBC/MIC are greater than 64. The rates of killing of Str. faecalis are reduced at concentrations of Cefathiamidine and Ampicillin greater than the MIC. The most rapid killing is obtained at 2 mg/L Cefathiamidine or 4 mg/L of Ampicillin. With the addition of 1 mg/L gentamicin this paradoxical bacteriocidal effect is eliminated. Time killing studies show99.9% of the cells are killed within 6 hours by a combination of aminoglycoside and β-lactam[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 33075-00-2
-
Appearance Solid
-
Molecular Weight 472.58
-
Formel C19H28N4O6S2
-
Color White to off-white
-
SMILES
OC(C1=C(COC(C)=O)CS[C@@]([C@@H]2NC(CS/C(NC(C)C)=N\C(C)C)=O)([H])N1C2=O)=O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 125 mg/mL (264.51 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.40 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.40 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Zhi LJ, et al. Population pharmacokinetics and dosing optimization of cefathiamidine in children with hematologic infection. Drug Des Devel Ther. 2018 Apr 17;12:855-862. [Content Brief]
[2]. Chen HY, et al. The killing effects of cefathiamidine or ampicillin alone and in combination with gentamicin against enterococci. J Antimicrob Chemother. 1983 Jul;12(1):19-26. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1160 mL | 10.5802 mL | 21.1604 mL | 52.9011 mL |
| 5 mM | 0.4232 mL | 2.1160 mL | 4.2321 mL | 10.5802 mL | |
| 10 mM | 0.2116 mL | 1.0580 mL | 2.1160 mL | 5.2901 mL | |
| 15 mM | 0.1411 mL | 0.7053 mL | 1.4107 mL | 3.5267 mL | |
| 20 mM | 0.1058 mL | 0.5290 mL | 1.0580 mL | 2.6451 mL | |
| 25 mM | 0.0846 mL | 0.4232 mL | 0.8464 mL | 2.1160 mL | |
| 30 mM | 0.0705 mL | 0.3527 mL | 0.7053 mL | 1.7634 mL | |
| 40 mM | 0.0529 mL | 0.2645 mL | 0.5290 mL | 1.3225 mL | |
| 50 mM | 0.0423 mL | 0.2116 mL | 0.4232 mL | 1.0580 mL | |
| 60 mM | 0.0353 mL | 0.1763 mL | 0.3527 mL | 0.8817 mL | |
| 80 mM | 0.0265 mL | 0.1323 mL | 0.2645 mL | 0.6613 mL | |
| 100 mM | 0.0212 mL | 0.1058 mL | 0.2116 mL | 0.5290 mL |
Cefathiamidine Related Classifications
HY-107329 Related Classifications
Powered by Bioz