SID 26681509 quarterhydrate
Based on 5 publication(s) in Google Scholar
SID 26681509 quarterhydrate is a potent, reversible, competitive, and selective inhibitor of human cathepsin L with an IC50 of 56 nM. SID 26681509 quarterhydrate inhibits in vitro propagation of malaria parasite Plasmodium falciparum and inhibits Leishmania major with IC50s of 15.4 μM and 12.5 μM, respectively. SID 26681509 quarterhydrate shows no inhibitory activity against cathepsin G.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.02%
- Formel: C27H33N5O5S.1/4H2O
- Molecular Weight:544.16
-
Speicherung:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) SID 26681509 quarterhydrate
MoreAlle Cathepsin Isoform-spezifische Produkte anzeigen
MoreAlle Parasite Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
Plasmodium |
After a 4 hr preincubation with cathepsin L, SID 26681509 becomes more potent, demonstrating an IC50 of 1.0 nM. SID 26681509 is determined to be a slow-binding and slowly reversible competitive inhibitor. Through a transient kinetic analysis for single-step reversibility, inhibition rate constants are kon = 24,000 M-1s-1 and koff = 2.2 × 10-5 s-1 (Ki = 0.89 nM). Molecular docking studies are undertaken using the experimentally-derived X-ray crystal structure of papain/CLIK-148[1].
SID 26681509 inhibits papain and cathepsins B, K, S, and V with IC50 values determined after one hour ranging from 618 nM to 8.442 μM. SID 26681509 shows no inhibitory activity against the serine protease cathepsin G[1].
SID 26681509 inhibits cathepsin V activity with an IC50 value of 0.5 μM. SID 26681509 (1-30 μM) blocks high-mobility group box 1 (HMGB1)-induced TNF-α production dose dependently without altering cell viability[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
Appearance Solid
-
Molecular Weight 544.16
-
Formel C27H33N5O5S.1/4H2O
-
Color White to off-white
-
SMILES
O=C(NNC(SCC(NC1=CC=CC=C1CC)=O)=O)[C@H](CC2=CNC3=CC=CC=C23)NC(OC(C)(C)C)=O.[1/4].O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Publications (5)
-
Journal Impact Factor
-
Most Recent
-
Signal Transduct Target Ther
2023 Oct 11;8(1):390. PMID: 37816708 -
Signal Transduct Target Ther
Cathepsin L plays a key role in SARS-CoV-2 infection in humans and humanized mice and is a promising target for new drug development. [Abstract]2021 Mar 27;6(1):134. PMID: 33774649 -
Nat Commun
2022 May 26;13(1):2935. PMID: 35618710 -
Nat Commun
Characterization of spike glycoprotein of SARS-CoV-2 on virus entry and its immune cross-reactivity with SARS-CoV. [Abstract]2020 Mar 27;11(1):1620. PMID: 32221306 -
iScience
Inhibition of cathepsin L ameliorates inflammation through the A20/NF-κB pathway in endotoxin-induced acute lung injury. [Abstract]2024 Oct 4;27(11):111024. PMID: 39559762
Lösungsmittel & Löslichkeit
DMSO : 50 mg/mL (91.88 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Ethanol : 5 mg/mL (9.19 mM; Need ultrasonic and warming)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.67 mg/mL (3.07 mM); Clear solution
This protocol yields a clear solution of ≥ 1.67 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (16.7 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (289 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Shah PP, et al. Kinetic characterization and molecular docking of a novel, potent, and selective slow-binding inhibitor of human cathepsin L. Mol Pharmacol. 2008 Jul;74(1):34-41. [Content Brief]
[2]. Pribis JP, et al. The HIV Protease Inhibitor Saquinavir Inhibits HMGB1-Driven Inflammation by Targeting the Interaction of Cathepsin V with TLR4/MyD88. Mol Med. 2015 Dec;21(1):749-757. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| Ethanol / DMSO | 1 mM | 1.8377 mL | 9.1885 mL | 18.3769 mL | 45.9424 mL |
| 5 mM | 0.3675 mL | 1.8377 mL | 3.6754 mL | 9.1885 mL | |
| DMSO | 10 mM | 0.1838 mL | 0.9188 mL | 1.8377 mL | 4.5942 mL |
| 15 mM | 0.1225 mL | 0.6126 mL | 1.2251 mL | 3.0628 mL | |
| 20 mM | 0.0919 mL | 0.4594 mL | 0.9188 mL | 2.2971 mL | |
| 25 mM | 0.0735 mL | 0.3675 mL | 0.7351 mL | 1.8377 mL | |
| 30 mM | 0.0613 mL | 0.3063 mL | 0.6126 mL | 1.5314 mL | |
| 40 mM | 0.0459 mL | 0.2297 mL | 0.4594 mL | 1.1486 mL | |
| 50 mM | 0.0368 mL | 0.1838 mL | 0.3675 mL | 0.9188 mL | |
| 60 mM | 0.0306 mL | 0.1531 mL | 0.3063 mL | 0.7657 mL | |
| 80 mM | 0.0230 mL | 0.1149 mL | 0.2297 mL | 0.5743 mL |