MS436
Based on 1 publication(s) in Google Scholar
MS436 is a new class of bromodomain inhibitor, exhibits potent affinity of an estimated Ki=30-50 nM for the BRD4 BrD1 and a 10-fold selectivity over the BrD2.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.94%
- CAS No.: 1395084-25-9
- Formule: C18H17N5O3S
- Masse moléculaire:383.42
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
-
Reprogramming Compound Library
HY-L039
-
Anti-Blood Cancer Compound Library
HY-L079
-
Anti-Hematopathy Compound Library
HY-L171
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Epigenetics Compound Library
HY-L005
-
Histone Modification Research Compound Library
HY-L024
-
Anti-Cancer Compound Library
HY-L025
-
Peptidomimetic Library
HY-L033
Publications Citing Use of MedChemExpress (MCE) MS436
More
Activité biologique
Ki: 30-50 nM (BRD4 bromodomain)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| RAW264.7 | IC50 |
3.8 μM
Compound: 27, MS436
|
Inhibition of BRD4 in LPS-stimulated mouse RAW264.7 cells assessed as inhibition of NF-kappaB-mediated nitric oxide production preincubated for 30 mins followed by LPS stimulation measured after 24 hrs by spectrophotometric analysis
Inhibition of BRD4 in LPS-stimulated mouse RAW264.7 cells assessed as inhibition of NF-kappaB-mediated nitric oxide production preincubated for 30 mins followed by LPS stimulation measured after 24 hrs by spectrophotometric analysis
|
[PMID: 24144283] |
| RAW264.7 | IC50 |
4.9 μM
Compound: 27, MS436
|
Inhibition of BRD4 in LPS-stimulated mouse RAW264.7 cells assessed as inhibition of NF-kappaB-mediated IL-6 expression preincubated for 30 mins followed by LPS stimulation measured after 24 hrs by ELISA
Inhibition of BRD4 in LPS-stimulated mouse RAW264.7 cells assessed as inhibition of NF-kappaB-mediated IL-6 expression preincubated for 30 mins followed by LPS stimulation measured after 24 hrs by ELISA
|
[PMID: 24144283] |
MS436, through a set of water-mediated interactions, exhibits low nanomolar affinity (estimated Ki of 30-50 nM) with preference for the first bromodomain over the second. MS436 effectively inhibits BRD4 activity in NF-κB-directed production of NO and pro-inflammatory cytokine interleukin-6 in murine macrophages. MS436 represents a new class of bromodomain inhibitors and will facilitate further investigation of the biological functions of the two bromodomains of BRD4 in gene expression. MS436 exhibits potent affinity of an estimated Ki=30-50 nM for the BRD4 BrD1 and a 10-fold selectivity over the BrD2, which is achieved through a unique set of water-mediated intermolecular interactions[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1395084-25-9
-
Appearance Solid
-
Masse moléculaire 383.42
-
Formule C18H17N5O3S
-
Color Pink to red
-
SMILES
O=S(C1=CC=C(/N=N/C2=CC(C)=C(O)C=C2N)C=C1)(NC3=NC=CC=C3)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Proc Natl Acad Sci U S A
2019 Feb 19;116(8):2961-2966. PMID: 30718431
Solvant et solubilité
DMSO : 25.5 mg/mL (66.51 mM; Need ultrasonic and warming; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1 mg/mL (2.61 mM); Clear solution
This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1 mg/mL (2.61 mM); Clear solution
This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
Binding affinity of the newly synthesized diazobenzene compounds (e.g., MS436) for various bromodoamins is assessed in a fluorescence anisotropy competition assay using a fluorescein isothiocyanate (FITC)-labeled MS417 as an assay probe. Competition experiments are performed with a BrD protein (0.25-1 µM) and the fluorescent probe (80 nM), and increasing concentration of unlabeled competing ligand in a PBS buffer (pH 7.4) in total volume of 80 µL Measurements are obtained after a 1 hour incubation of the fluorescent ligand and the protein at 25°C with Safire 2 microplate reader. In a competition-binding assay, fluorescent ligand concentration is ≤2Kd, and protein concentration is set at which 50-80% of fluorescent ligand is bound. Dissociation constant of a competing ligand is calculated with the correction to Cheng-Prussoff equation introduced by Nicolovska-Coleska and colleagues. Assuming one-site competitive binding model, the equation used to calculate Ki’s from IC50 values[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Murine macrophage RAW264.7 cells are plated at a density of 1×104 cells per well in a 96-well plate and incubated at 37°C for 18 h. The cells are then treated with the diazobenzene bromodomain inhibitors (e.g., MS436) up to 100 µM for 24 hours. At the end of the 24 hr incubation, 10 µL of the MTT solution (4 mg/mL) is added to each well and incubated at 37°C for 4 h. The supernatants are then removed and the cells are solubilized in 100 µL of 100% DMSO. The diazobenzene compounds are first dissolved in DMSO then diluted with culture medium to concentrations that ranged from 0.28 to 50000 nM. The final concentration of DMSO is adjusted to 0.05% (v/v). The extent of the reduction is measured by the absorbance at 570/630 nm using EnVison 2104 Multilabel Reader[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6081 mL | 13.0404 mL | 26.0808 mL | 65.2019 mL |
| 5 mM | 0.5216 mL | 2.6081 mL | 5.2162 mL | 13.0404 mL | |
| 10 mM | 0.2608 mL | 1.3040 mL | 2.6081 mL | 6.5202 mL | |
| 15 mM | 0.1739 mL | 0.8694 mL | 1.7387 mL | 4.3468 mL | |
| 20 mM | 0.1304 mL | 0.6520 mL | 1.3040 mL | 3.2601 mL | |
| 25 mM | 0.1043 mL | 0.5216 mL | 1.0432 mL | 2.6081 mL | |
| 30 mM | 0.0869 mL | 0.4347 mL | 0.8694 mL | 2.1734 mL | |
| 40 mM | 0.0652 mL | 0.3260 mL | 0.6520 mL | 1.6300 mL | |
| 50 mM | 0.0522 mL | 0.2608 mL | 0.5216 mL | 1.3040 mL | |
| 60 mM | 0.0435 mL | 0.2173 mL | 0.4347 mL | 1.0867 mL |
MS436 Related Classifications
HY-13959 Related Classifications
Powered by Bioz