iBRD4-BD1 diTFA
Based on 1 Customer Validation
iBRD4-BD1 diTFA is selective BRD4 bromodomain inhibitor. iBRD4-BD1 diTFA has inhibition activity for BRD4 bromodomain with an IC50 value of 12 nM. iBRD4-BD1 diTFA can be used for the research of inflammation and oncology.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.52%
- CAS No.: 2839318-20-4
- Formule: C33H32F9N5O5
- Masse moléculaire:749.62
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
|
BRD4 |
iBRD4-BD1 diTFA has affinity and selectivity for the BET-family BRD4-BD1 with an IC50 value of 12 nM[1].
iBRD4-BD1 diTFA has affinity and selectivity for the BET-family BRD4-BD2, BRD3-BD1, BRD3-BD2, BRD2-BD1 and BRD2-BD2 with IC50 values of 16 μM, 1.0 μM , 75 μM , 280 nM and 7.1 μM, respectively[1].
iBRD4-BD1 (0-50 μM; 72 h) diTFA has cytotoxicity with an EC50 value of 2.3 μM in MM.1S cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2839318-20-4
-
Appearance Viscous Liquid
-
Masse moléculaire 749.62
-
Formule C33H32F9N5O5
-
Color Colorless to light yellow
-
SMILES
FC(F)(C1=CC=C(C2=C(C3=CC=NC(OC4=CC(C(C)C)=CC=C4C)=N3)N(C5CCNCC5)C=N2)C=C1)F.OC(C(F)(F)F)=O.OC(C(F)(F)F)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
DMSO : 100 mg/mL (133.40 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (3.34 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (3.34 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.3340 mL | 6.6700 mL | 13.3401 mL | 33.3502 mL |
| 5 mM | 0.2668 mL | 1.3340 mL | 2.6680 mL | 6.6700 mL | |
| 10 mM | 0.1334 mL | 0.6670 mL | 1.3340 mL | 3.3350 mL | |
| 15 mM | 0.0889 mL | 0.4447 mL | 0.8893 mL | 2.2233 mL | |
| 20 mM | 0.0667 mL | 0.3335 mL | 0.6670 mL | 1.6675 mL | |
| 25 mM | 0.0534 mL | 0.2668 mL | 0.5336 mL | 1.3340 mL | |
| 30 mM | 0.0445 mL | 0.2223 mL | 0.4447 mL | 1.1117 mL | |
| 40 mM | 0.0334 mL | 0.1668 mL | 0.3335 mL | 0.8338 mL | |
| 50 mM | 0.0267 mL | 0.1334 mL | 0.2668 mL | 0.6670 mL | |
| 60 mM | 0.0222 mL | 0.1112 mL | 0.2223 mL | 0.5558 mL | |
| 80 mM | 0.0167 mL | 0.0834 mL | 0.1668 mL | 0.4169 mL | |
| 100 mM | 0.0133 mL | 0.0667 mL | 0.1334 mL | 0.3335 mL |
iBRD4-BD1 diTFA Related Classifications
HY-151594A Related Classifications
Powered by Bioz