TMX-4100
Based on 1 Customer Validation
TMX-4100 is a selective phosphodiesterase 6D (PDE6D) degrader. TMX-4100 shows a high degradation preference for PDE6D with the DC50 values less than 200 nM in MOLT4, Jurkat, and MM.1S cells. TMX-4100 can be used for the research of multiple myeloma.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.26%
- No. CAS: 2367619-63-2
- Fòrmula: C11H10N4O2S
- Peso molecular:262.29
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
|
PDE6D |
TMX-4100 (compound 3; 1 μM; 4 h) shows a high degradation preference for PDE6D in MOLT4 cells[1]. TMX-4100 has better proteome-wide degradation selectivity in MOLT4 cells, compare to PDE6D degrader FPFT-2216[1]. TMX-4100 does not impede the growth of KRAS-dependent cell lines (MIA PaCa-2, NCI-H358, AGS, PA-TU-8988T cells)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MOLT4 cells
-
Concentration:1 μM
-
Incubation Time:4 hours
-
Result:Showed a high degradation preference for PDE6D.
-
Cell Line:MOLT4, Jurkat, and MM.1S cells
-
Concentration:0 nM, 40 nM, 200 nM, 1 μM;
-
Incubation Time:4 hours
-
Result:Showed a high degradation preference for PDE6D with the DC50 value less than 200 nM.
Chemical Information
-
No. CAS 2367619-63-2
-
Appearance Solid
-
Peso molecular 262.29
-
Fòrmula C11H10N4O2S
-
Color White to off-white
-
SMILES
O=C(C(N1N=NC(C2=CSC=C2)=C1)CC3)NC3=O
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 100 mg/mL (381.25 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 0.71 mg/mL (2.71 mM); Clear solution
This protocol yields a clear solution of ≥ 0.71 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (7.1 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 0.71 mg/mL (2.71 mM); Clear solution
This protocol yields a clear solution of ≥ 0.71 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (7.1 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.8125 mL | 19.0626 mL | 38.1252 mL | 95.3129 mL |
| 5 mM | 0.7625 mL | 3.8125 mL | 7.6250 mL | 19.0626 mL | |
| 10 mM | 0.3813 mL | 1.9063 mL | 3.8125 mL | 9.5313 mL | |
| 15 mM | 0.2542 mL | 1.2708 mL | 2.5417 mL | 6.3542 mL | |
| 20 mM | 0.1906 mL | 0.9531 mL | 1.9063 mL | 4.7656 mL | |
| 25 mM | 0.1525 mL | 0.7625 mL | 1.5250 mL | 3.8125 mL | |
| 30 mM | 0.1271 mL | 0.6354 mL | 1.2708 mL | 3.1771 mL | |
| 40 mM | 0.0953 mL | 0.4766 mL | 0.9531 mL | 2.3828 mL | |
| 50 mM | 0.0763 mL | 0.3813 mL | 0.7625 mL | 1.9063 mL | |
| 60 mM | 0.0635 mL | 0.3177 mL | 0.6354 mL | 1.5885 mL | |
| 80 mM | 0.0477 mL | 0.2383 mL | 0.4766 mL | 1.1914 mL | |
| 100 mM | 0.0381 mL | 0.1906 mL | 0.3813 mL | 0.9531 mL |
TMX-4100 Related Classifications
HY-145321 Related Classifications
Powered by Bioz