Hypidone hydrochloride
Based on 2 publication(s) in Google Scholar
Hypidone hydrochloride (YL0919) is an orally active antidepressant agent with dual activity as a highly seletive 5-HT uptake blocker and an effective 5-HT1A receptor agonist (Ki=0.19 nM). Hypidone hydrochloride inhibits the uptake of [3H]-5-HT into rat cerebral cortical synaptosomes and HEK293 cells with IC50s of 1.78 nM and 1.93 nM, respectively. Hypidone hydrochloride shows remarkable antidepressant effects in animal models and has the poential for the investigation of depressive disorder.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.73%
- CAS. Nr.: 1339058-04-6
- Formel: C18H23ClN2O2
- Molecular Weight:334.84
-
Speicherung:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Hypidone hydrochloride
MoreAlle 5-HT Receptor Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
5-HT1A Receptor |
Hypidone hydrochloride inhibits the uptake of [3H]-5-HT into rat cerebral cortical synaptosomes and HEK293 cells stably expressing hSERT with IC50 values of 1.78 nM and 1.93,respectively[1]. Hypidone hydrochloride (0.01 nM-10 μM) concentration-dependently inhibits forskolin-stimulated cAMP formation, exerts a concentration-dependent inhibitory effect on cAMP formation with an IC50 of approximately 23.9 nM. And in antagonism studies, WAY-100635 prevents Hypidone hydrochloride-mediated inhibition of forskolin-stimulated cAMP formation[1]. Hypidone hydrochloride shows affinities to rat 5-HT1A receptors, SERTs, NETs, and DATs, it binds to 5-HT1A receptor, serotonin transporter (SERT) with high affinity (Ki=0.19 and 0.72 nM, respectively), but its affinity to NET and DAT are low, blocking [3H]nisoxetine and [3H]win35428 binding with Ki values of 650 nM and 2652 nM respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male ICR mice weighing 18–22 g[1]
-
Dosage:1.25, 2.5, and 5 mg/kg
-
Administration:Oral administration
-
Result:Had an effect on Antidepressant-like mice in TST and FST.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS. Nr. 1339058-04-6
-
Appearance Solid
-
Molecular Weight 334.84
-
Formel C18H23ClN2O2
-
Color White to off-white
-
SMILES
O=C1C=CC=CN1CC2(O)CCN(CC3=CC=CC=C3)CC2.[H]Cl
-
Synonyms
YL0919
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Int Immunopharmacol
Hypidone hydrochloride (YL-0919) protects mice from meningitis via Sigma1R-STAT1-NLRP3-GSDMD pathway. [Abstract]2024 Feb 15:128:111524. PMID: 38232537 -
Neuropharmacology
Novel mechanism of hypidone hydrochloride (YL-0919) in Parkinson's disease: inhibiting neuronal ferroptosis by targeting the Sigma1R-PI3K-AKT-ACSL4 axis. [Abstract]2026 Jul 1:292:110950. PMID: 41887568
Lösungsmittel & Löslichkeit
DMSO : ≥ 30 mg/mL (89.60 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.47 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.47 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.9865 mL | 14.9325 mL | 29.8650 mL | 74.6625 mL |
| 5 mM | 0.5973 mL | 2.9865 mL | 5.9730 mL | 14.9325 mL | |
| 10 mM | 0.2987 mL | 1.4933 mL | 2.9865 mL | 7.4663 mL | |
| 15 mM | 0.1991 mL | 0.9955 mL | 1.9910 mL | 4.9775 mL | |
| 20 mM | 0.1493 mL | 0.7466 mL | 1.4933 mL | 3.7331 mL | |
| 25 mM | 0.1195 mL | 0.5973 mL | 1.1946 mL | 2.9865 mL | |
| 30 mM | 0.0996 mL | 0.4978 mL | 0.9955 mL | 2.4888 mL | |
| 40 mM | 0.0747 mL | 0.3733 mL | 0.7466 mL | 1.8666 mL | |
| 50 mM | 0.0597 mL | 0.2987 mL | 0.5973 mL | 1.4933 mL | |
| 60 mM | 0.0498 mL | 0.2489 mL | 0.4978 mL | 1.2444 mL | |
| 80 mM | 0.0373 mL | 0.1867 mL | 0.3733 mL | 0.9333 mL |
Hypidone hydrochloride Related Classifications
HY-100769 Related Classifications
Powered by Bioz