PLX-4545
Based on 1 Customer Validation
PLX-4545 is an orally active, selective molecular glue degrader targeting IKZF2. Through a molecular glue mechanism, PLX-4545 binds to CRBN, recruits IKZF2 to form a ternary complex, and promotes its ubiquitination and proteasomal degradation. This further converts inhibitory regulatory T cells (Treg) into effector-like T cells, enhances CD8+ T cell responses, and modulates the Teff:Treg balance. PLX-4545 also increases the production of the inflammatory cytokine IL-2 and reduces the suppressive activity of Treg. PLX-4545 can be used in cancer immunotherapy research, and exhibits a synergistic effect when combined with immune checkpoint inhibitors such as anti-PD1.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 96.76%
- CAS 番号: 2892065-45-9
- 分子式: C28H31N3O4
- 分子量:473.56
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
生物活性
|
IZKF2 |
Cereblon |
PLX-4545 rapidly and completely degrades IKZF2, reduces the expression of CD25 and FOXP3 in inhibitory regulatory T cells (Treg), converts them into effector-like T cells, and simultaneously promotes the proliferation of effector T cells (Teff)[1].
PLX-4545 promotes the production of inflammatory cytokines IL-2 and IFNγ, enhances CD8+ T cell responses, regulates the Teff:Treg balance, and exerts a selective degradation effect on IKZF2[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
化学情報
-
CAS 番号 2892065-45-9
-
性状 Solid
-
分子量 473.56
-
分子式 C28H31N3O4
-
Color White to off-white
-
SMILES
O=C1CC[C@@H](C(N1)=O)N2CC3=C(C2=O)C=CC(O[C@H]4CCCC[C@@H]4N5CC(C5)C6=CC=CC=C6)=C3
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
DMSO : 100 mg/mL (211.17 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.28 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.28 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
取扱説明書 (2659 KB)
参考文献
[2]. Chen Z, et al. Development of PVTX-405 as a potent and highly selective molecular glue degrader of IKZF2 for cancer immunotherapy. Nat Commun. 2025 May 1;16(1):4095. [Content Brief]
[3]. Zhang X, et al. Discovery of a Novel Series of iso-Indolinone-Based Glutarimides as Highly Efficacious and Selective IKZF2 Molecular Glue Degraders. J Med Chem. 2025 Sep 11;68(17):18230-18257. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1117 mL | 10.5583 mL | 21.1166 mL | 52.7916 mL |
| 5 mM | 0.4223 mL | 2.1117 mL | 4.2233 mL | 10.5583 mL | |
| 10 mM | 0.2112 mL | 1.0558 mL | 2.1117 mL | 5.2792 mL | |
| 15 mM | 0.1408 mL | 0.7039 mL | 1.4078 mL | 3.5194 mL | |
| 20 mM | 0.1056 mL | 0.5279 mL | 1.0558 mL | 2.6396 mL | |
| 25 mM | 0.0845 mL | 0.4223 mL | 0.8447 mL | 2.1117 mL | |
| 30 mM | 0.0704 mL | 0.3519 mL | 0.7039 mL | 1.7597 mL | |
| 40 mM | 0.0528 mL | 0.2640 mL | 0.5279 mL | 1.3198 mL | |
| 50 mM | 0.0422 mL | 0.2112 mL | 0.4223 mL | 1.0558 mL | |
| 60 mM | 0.0352 mL | 0.1760 mL | 0.3519 mL | 0.8799 mL | |
| 80 mM | 0.0264 mL | 0.1320 mL | 0.2640 mL | 0.6599 mL | |
| 100 mM | 0.0211 mL | 0.1056 mL | 0.2112 mL | 0.5279 mL |
PLX-4545 関連分類
HY-159647 関連分類
Powered by Bioz