BAY-299
Based on 4 publication(s) in Google Scholar
BAY-299, a chemical probe, is a very potent, dual inhibitor with IC50s of 67 nM for BRPF2 bromodomains (BD), 8 nM for TAF1 BD2, and 106 nM for TAF1L BD2.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.40%
- CAS No.: 2080306-23-4
- 화학식: C25H23N3O4
- 분자량:429.47
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) BAY-299
More
Biological Activity
|
BRPF2 BD 67 nM (IC50) |
BRPF1 BD 3150 nM (IC50) |
BRPF3 BD 5550 nM (IC50) |
TAF1 BD2 8 nM (IC50) |
TAF1L BD2 106 nM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| MDA-MB-231 | IC50 |
48 μM
Compound: 2; BAY-299
|
Antiproliferative activity against human MDA-MB-231 cells after 72 hrs by MTS assay
Antiproliferative activity against human MDA-MB-231 cells after 72 hrs by MTS assay
|
[PMID: 27935314] |
BAY-299 is a dual inhibitor of the bromodomain and PHD finger (BRPF) family member BRPF2 and the TATA box binding protein-associated factors TAF1 and TAF1L. TR-FRET assays showed that BAY-299 is a potent inhibitor of BRPF2 BD with an IC50 of 67 nM, and a selectivity of 47- and 83-fold over BRPF1 and BRPF3 BDs. The profile of BAY-299 is further confirmed by AlphaScreen assay, where an IC50 of 97 nM and a selectivity of 23- and 25-fold over BRPF1 and BRPF3 BDs are measured. NanoBRET experiments show that the interaction of BRPF2 BD with histones H4 and H3.3 is blocked by BAY-299 with IC50 values of 575 and 825 nM, respectively. For TAF1 BD2, the IC50 values are 970 and 1400 nM, respectively. No inhibitory effect is observed for the interaction between BRPF1 or BRD4 and histone H4 up to 10 μM for BAY-299. BAY-299 inhibits MOLM-13, MV4-11, 769-P, Jurkat, NCI-H526, CHL-1, and 5637 cells proliferation with GI50s of 1060, 2630, 3210, 3900, 6860, 7400, and 7980 nM, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2080306-23-4
-
Appearance Solid
-
분자량 429.47
-
화학식 C25H23N3O4
-
Color Light yellow to yellow
-
SMILES
O=C(N1C2=C(C)C=C(N(C)C3=O)C(N3C)=C2)C4=CC=C(CCCO)C5=C4C(C1=O)=CC=C5
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
Human iPSC-based Modeling of Pulmonary Fibrosis Reveals p300/CBP Inhibition Suppresses Alveolar Transitional Cell State. [Abstract]2026 Feb 12;17(1):1214. PMID: 41680175 -
Mol Carcinog
PRMT1 inhibition promotes ferroptosis sensitivity via ACSL1 upregulation in acute myeloid leukemia. [Abstract]2023 Aug;62(8):1119-1135. PMID: 37144835 -
Transl Cancer Res
2021 Dec;10(12):5307-5318. PMID: 35116379 -
용액&용해도
DMSO : 25 mg/mL (58.21 mM; Need ultrasonic and warming; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.82 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
MOLM-13, MV4-11, 769-P, Jurkat, NCI-H526, CHL-1, and 5637 cell lines are treated with BAY-299 while in the logarithmic growth phase, and their viability is determined by AlamarBlue staining[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Rats[1]
BAY-299 is administered to three male Wistar rats per arm, either intravenously or intragastrally formulated as solutions. BAY-299 is given as i.v. bolus, and blood samples are taken at 2 min, 8 min, 15 min, 30 min, 45 min, 1 h, 2 h, 4 h, 6 h, 8 h, and 24 h after dosing. For pharmacokinetics after intragastral administration, BAY-299 is given intragastrally to fasted rats and blood samples are taken at 5 min, 15 min, 30 min, 45 min, 1 h, 2 h, 4 h, 6 h, 8 h, and 24 h after dosing. Blood is collected into lithium-heparin tubes and centrifuged for 15 min at 3000 rpm[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
순도&문서
-
Data Sheet (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3285 mL | 11.6423 mL | 23.2845 mL | 58.2113 mL |
| 5 mM | 0.4657 mL | 2.3285 mL | 4.6569 mL | 11.6423 mL | |
| 10 mM | 0.2328 mL | 1.1642 mL | 2.3285 mL | 5.8211 mL | |
| 15 mM | 0.1552 mL | 0.7762 mL | 1.5523 mL | 3.8808 mL | |
| 20 mM | 0.1164 mL | 0.5821 mL | 1.1642 mL | 2.9106 mL | |
| 25 mM | 0.0931 mL | 0.4657 mL | 0.9314 mL | 2.3285 mL | |
| 30 mM | 0.0776 mL | 0.3881 mL | 0.7762 mL | 1.9404 mL | |
| 40 mM | 0.0582 mL | 0.2911 mL | 0.5821 mL | 1.4553 mL | |
| 50 mM | 0.0466 mL | 0.2328 mL | 0.4657 mL | 1.1642 mL |