PI3K-IN-31
Based on 1 Customer Validation
PI3K-IN-31 (Compound 6b) is a potent PI3K inhibitor with IC50s of 3.7 nM, 74 nM, 14.6 nM, and 9.9 nM for PI3Kα, PI3Kβ, PI3Kγ, and PI3Kδ, respectively. PI3K-IN-31 has anticancer effects.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.33%
- CAS. Nr.: 1359956-12-9
- Formel: C19H23F2N7O3
- Molecular Weight:435.43
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biologische Aktivität
|
PI3Kα 3.7 nM (IC50) |
PI3Kδ 9.9 nM (IC50) |
PI3Kγ 14.6 nM (IC50) |
PI3Kβ 74 nM (IC50) |
Chemical Information
-
CAS. Nr. 1359956-12-9
-
Appearance Solid
-
Molecular Weight 435.43
-
Formel C19H23F2N7O3
-
Color White to off-white
-
SMILES
FC(C1=NC2=CC=CC=C2N1C3=NC(N4CCOCC4)=NC(N(CCO)CCO)=N3)F
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (229.66 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (5.74 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (278 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2966 mL | 11.4829 mL | 22.9658 mL | 57.4145 mL |
| 5 mM | 0.4593 mL | 2.2966 mL | 4.5932 mL | 11.4829 mL | |
| 10 mM | 0.2297 mL | 1.1483 mL | 2.2966 mL | 5.7415 mL | |
| 15 mM | 0.1531 mL | 0.7655 mL | 1.5311 mL | 3.8276 mL | |
| 20 mM | 0.1148 mL | 0.5741 mL | 1.1483 mL | 2.8707 mL | |
| 25 mM | 0.0919 mL | 0.4593 mL | 0.9186 mL | 2.2966 mL | |
| 30 mM | 0.0766 mL | 0.3828 mL | 0.7655 mL | 1.9138 mL | |
| 40 mM | 0.0574 mL | 0.2871 mL | 0.5741 mL | 1.4354 mL | |
| 50 mM | 0.0459 mL | 0.2297 mL | 0.4593 mL | 1.1483 mL | |
| 60 mM | 0.0383 mL | 0.1914 mL | 0.3828 mL | 0.9569 mL | |
| 80 mM | 0.0287 mL | 0.1435 mL | 0.2871 mL | 0.7177 mL | |
| 100 mM | 0.0230 mL | 0.1148 mL | 0.2297 mL | 0.5741 mL |