FPTQ
Based on 1 Customer Validation
FPTQ is potent mGluR1 antagonist with IC50 values of 6 nM and 1.4 nM for human and mouse mGluR1 respectively. FPTQ has anti-oxidant and anti-inflammatory effects in vitro and in vivo.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.92%
- CAS No.: 864863-72-9
- Formule: C17H12FN5
- Masse moléculaire:305.31
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Pyroptosis Compound Library
HY-L059
-
Neurotransmitter Receptor Compound Library
HY-L062
-
Neuroprotective Compound Library
HY-L070
-
Anti-Parkinson's Disease Compound Library
HY-L085
-
Neurodegenerative Disease-related Compound Library
HY-L086
-
Antidepressant Compound Library
HY-L108
-
Heterocyclic Compound Library
HY-L138
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Inhibitors Library
HY-L158
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
-
GPCR/G Protein Compound Library
HY-L006
-
Neuronal Signaling Compound Library
HY-L013
Activité biologique
|
Human mGluR1 6 nM (IC50) |
Mouse mGluR1 1.4 nM (IC50) |
FPTQ (0.5-10 μM) does not shows any cytotoxicity was not observed at 0.5, 1, 5, and 10 μM in RAW264.7 macrophage cells[2].FPTQ (1-20 μM; 24 hours) reduces LPS-induced NO production at > 1 μM FPTQ, and at 10 μM, FPTQ treatment causes a 31% anti-oxidant effect in RAW264.7 macrophage cells[2].FPTQ (1-20 μM; 24 hours) dramaticly decreases LPS-induced expression levels of IL-1β and Il-6. At a concentration of 10 μM, FPTQ causes a 27% and 44% reduction in the mRNA expression of IL-1β and Il-6, respectively in RAW264.7 macrophage cells[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:RAW264.7 macrophage cells
-
Concentration:1, 10, or 20 μM
-
Incubation Time:24 hours
-
Result:Decreased IL-1β and IL-6 mRNA expression
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 864863-72-9
-
Appearance Solid
-
Masse moléculaire 305.31
-
Formule C17H12FN5
-
Color Light yellow to yellow
-
SMILES
FC(N=CC=C1)=C1N2N=NC(C3=CC4=C(C=C3)N=CC=C4)=C2C
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : 33.33 mg/mL (109.17 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.19 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Fujinaga M et al. Synthesis and evaluation of 6-[1-(2-[(18)F]fluoro-3-pyridyl)-5-methyl-1H-1,2,3-triazol-4-yl]quinoline for positron emission tomography imaging of the metabotropic glutamate receptor type 1 in brain. Bioorg Med Chem, 2011 Jan 1, 19(1):102-10. [Content Brief]
[2]. Geum Ran Kim, et al. Anti-inflammatory effect of a novel synthetic compound 1-((4-fluorophenyl)thio)isoquinoline in RAW264.7 macrophages and a zebrafish model. Fish Shellfish Immunol. 2019 Apr;87:395-400. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2754 mL | 16.3768 mL | 32.7536 mL | 81.8840 mL |
| 5 mM | 0.6551 mL | 3.2754 mL | 6.5507 mL | 16.3768 mL | |
| 10 mM | 0.3275 mL | 1.6377 mL | 3.2754 mL | 8.1884 mL | |
| 15 mM | 0.2184 mL | 1.0918 mL | 2.1836 mL | 5.4589 mL | |
| 20 mM | 0.1638 mL | 0.8188 mL | 1.6377 mL | 4.0942 mL | |
| 25 mM | 0.1310 mL | 0.6551 mL | 1.3101 mL | 3.2754 mL | |
| 30 mM | 0.1092 mL | 0.5459 mL | 1.0918 mL | 2.7295 mL | |
| 40 mM | 0.0819 mL | 0.4094 mL | 0.8188 mL | 2.0471 mL | |
| 50 mM | 0.0655 mL | 0.3275 mL | 0.6551 mL | 1.6377 mL | |
| 60 mM | 0.0546 mL | 0.2729 mL | 0.5459 mL | 1.3647 mL | |
| 80 mM | 0.0409 mL | 0.2047 mL | 0.4094 mL | 1.0235 mL | |
| 100 mM | 0.0328 mL | 0.1638 mL | 0.3275 mL | 0.8188 mL |
FPTQ Related Classifications
HY-100382 Related Classifications
Powered by Bioz