DXd-d2
Based on 1 Customer Validation
DXd-d22 (Exatecan derivative for ADC-d2) is the deuterated-labeled DXd (HY-13631D). DXd (Exatecan derivative for ADC) is a potent DNA topoisomerase I inhibitor, with an IC50 of 0.31 μM, used as a conjugated drug of HER2-targeting ADC (DS-8201a).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.71%
- CAS No.: 2760715-90-8
- Formule: C26H22D2FN3O6
- Masse moléculaire:495.50
-
Stockage:
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Voir tous les produits spécifiques à Isoform Topoisomerase
MoreVoir tous les produits spécifiques à Isoform ADC Payloads
More
Activité biologique
|
Topoisomerase I 0.31 μM (IC50) |
Camptothecins |
Stable heavy isotopes of hydrogen, carbon, and other elements have been incorporated into drug molecules, largely as tracers for quantitation during the drug development process. Deuteration has gained attention because of its potential to affect the pharmacokinetic and metabolic profiles of drugs.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
1. This compound can be used as a tracer
2. This compound can be used as an internal standard for quantitative analysis by NMR, GC-MS, or LC-MS.
Chemical Information
-
CAS No. 2760715-90-8
-
Unlabeled Cas 1599440-33-1
-
Appearance Solid
-
Masse moléculaire 495.50
-
Formule C26H22D2FN3O6
-
Color White to off-white
-
SMILES
OC([2H])([2H])C(N[C@@H]1C2=C3C(C(N4C3)=CC([C@](O)(C(OC5)=O)CC)=C5C4=O)=NC6=CC(F)=C(C)C(CC1)=C62)=O
-
Synonyms
Exatecan derivative for ADC-d2
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvant et solubilité
DMSO : 100 mg/mL (201.82 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.05 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0182 mL | 10.0908 mL | 20.1816 mL | 50.4541 mL |
| 5 mM | 0.4036 mL | 2.0182 mL | 4.0363 mL | 10.0908 mL | |
| 10 mM | 0.2018 mL | 1.0091 mL | 2.0182 mL | 5.0454 mL | |
| 15 mM | 0.1345 mL | 0.6727 mL | 1.3454 mL | 3.3636 mL | |
| 20 mM | 0.1009 mL | 0.5045 mL | 1.0091 mL | 2.5227 mL | |
| 25 mM | 0.0807 mL | 0.4036 mL | 0.8073 mL | 2.0182 mL | |
| 30 mM | 0.0673 mL | 0.3364 mL | 0.6727 mL | 1.6818 mL | |
| 40 mM | 0.0505 mL | 0.2523 mL | 0.5045 mL | 1.2614 mL | |
| 50 mM | 0.0404 mL | 0.2018 mL | 0.4036 mL | 1.0091 mL | |
| 60 mM | 0.0336 mL | 0.1682 mL | 0.3364 mL | 0.8409 mL | |
| 80 mM | 0.0252 mL | 0.1261 mL | 0.2523 mL | 0.6307 mL | |
| 100 mM | 0.0202 mL | 0.1009 mL | 0.2018 mL | 0.5045 mL |
DXd-d2 Related Classifications
HY-13631DS1 Related Classifications
Powered by Bioz