Roginolisib
Based on 1 publication(s) in Google Scholar
Roginolisib (MSC2360844; IOA-244) is a potent, orally active and selective PI3Kδ inhibitor, with an IC50 of 145 nM. Roginolisib shows highly selective against a panel of 278 additional kinases.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.66%
- CAS No.: 1305267-37-1
- Formule: C26H27FN4O5S
- Masse moléculaire:526.58
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) Roginolisib
More
Activité biologique
|
PI3Kδ 145 nM (IC50) |
PI3Kα 18500 nM (IC50) |
PI3Kβ 2850 nM (IC50) |
Roginolisib (0-10 μM; 1 hours) completely abolished BCR-induced pAkt in Ramos B cells in a concentration-dependent manner with IC50 values of 280 nM[1].
Roginolisib inhibits B cell proliferation in a concentration-dependent manner with an IC50 of 48 nM. Roginolisib blocks BCR- and TCR-mediated responses in lymphocytes and TLR-induced IFNα by pDC in human primary cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:B cells
-
Concentration:0-10 μM
-
Incubation Time:1 hour
-
Result:Inhibited B cell proliferation in a concentration-dependent manner with an IC50 of 48 nM.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:NZB/W F1 female mice[1]
-
Dosage:6.6, 22, or 66 mg/kg
-
Administration:Oral; starting at week 2 post ADV-IFNα delivery, once daily at 10 weeks
-
Result:Significantly reduced proteinuria incidence and severity in a dose-dependent manner.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1305267-37-1
-
Appearance Solid
-
Masse moléculaire 526.58
-
Formule C26H27FN4O5S
-
Color White to off-white
-
SMILES
O=C(C1=NN(C2=CC=C(CN3CCOCC3)C=C2)C(C4=CC=CC(F)=C45)=C1CS5(=O)=O)N6CCOCC6
-
Synonyms
MSC2360844; IOA-244
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Mol Oncol
2026 Jan 22. PMID: 41568714
Solvant et solubilité
DMSO : 100 mg/mL (189.90 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 10 mg/mL (18.99 mM); Clear solution
This protocol yields a clear solution of ≥ 10 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (100.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 10 mg/mL (18.99 mM); Clear solution
This protocol yields a clear solution of ≥ 10 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (100.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (279 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8990 mL | 9.4952 mL | 18.9905 mL | 47.4762 mL |
| 5 mM | 0.3798 mL | 1.8990 mL | 3.7981 mL | 9.4952 mL | |
| 10 mM | 0.1899 mL | 0.9495 mL | 1.8990 mL | 4.7476 mL | |
| 15 mM | 0.1266 mL | 0.6330 mL | 1.2660 mL | 3.1651 mL | |
| 20 mM | 0.0950 mL | 0.4748 mL | 0.9495 mL | 2.3738 mL | |
| 25 mM | 0.0760 mL | 0.3798 mL | 0.7596 mL | 1.8990 mL | |
| 30 mM | 0.0633 mL | 0.3165 mL | 0.6330 mL | 1.5825 mL | |
| 40 mM | 0.0475 mL | 0.2374 mL | 0.4748 mL | 1.1869 mL | |
| 50 mM | 0.0380 mL | 0.1899 mL | 0.3798 mL | 0.9495 mL | |
| 60 mM | 0.0317 mL | 0.1583 mL | 0.3165 mL | 0.7913 mL | |
| 80 mM | 0.0237 mL | 0.1187 mL | 0.2374 mL | 0.5935 mL | |
| 100 mM | 0.0190 mL | 0.0950 mL | 0.1899 mL | 0.4748 mL |