PfDHODH-IN-1
Based on 1 Customer Validation
PfDHODH-IN-1 is an analogue of the active metabolite of Leflunomide. PfDHODH-IN-1 is a Plasmodium falciparum dihydroorotate dehydrogenase (PfDHODH) inhibitor. PfDHODH-IN-1 has antimalarial activity.
For research use only. We do not sell to patients.
- Purity: 99.12%
- CAS No.: 183945-55-3
- Formula: C14H11F3N2O2
- Molecular Weight:296.24
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Biological Activity
Chemical Information
-
CAS No. 183945-55-3
-
Appearance Solid
-
Molecular Weight 296.24
-
Formula C14H11F3N2O2
-
Color Off-white to light yellow
-
SMILES
O=C(NC1=CC=C(C(F)(F)F)C=C1)/C(C#N)=C(C2CC2)\O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : 50 mg/mL (168.78 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.44 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (282 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Handling Instructions (2659 KB)
References
[1]. Li SL, et al. 3D-QSAR studies on a series of dihydroorotate dehydrogenase inhibitors: analogues of the active metabolite of leflunomide. Int J Mol Sci. 2011;12(5):2982-93. [Content Brief]
[2]. Hou X, et al. QSAR study on the antimalarial activity of Plasmodium falciparum dihydroorotate dehydrogenase (PfDHODH) inhibitors. SAR QSAR Environ Res. 2016;27(2):101-24. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.3756 mL | 16.8782 mL | 33.7564 mL | 84.3910 mL |
| 5 mM | 0.6751 mL | 3.3756 mL | 6.7513 mL | 16.8782 mL | |
| 10 mM | 0.3376 mL | 1.6878 mL | 3.3756 mL | 8.4391 mL | |
| 15 mM | 0.2250 mL | 1.1252 mL | 2.2504 mL | 5.6261 mL | |
| 20 mM | 0.1688 mL | 0.8439 mL | 1.6878 mL | 4.2196 mL | |
| 25 mM | 0.1350 mL | 0.6751 mL | 1.3503 mL | 3.3756 mL | |
| 30 mM | 0.1125 mL | 0.5626 mL | 1.1252 mL | 2.8130 mL | |
| 40 mM | 0.0844 mL | 0.4220 mL | 0.8439 mL | 2.1098 mL | |
| 50 mM | 0.0675 mL | 0.3376 mL | 0.6751 mL | 1.6878 mL | |
| 60 mM | 0.0563 mL | 0.2813 mL | 0.5626 mL | 1.4065 mL | |
| 80 mM | 0.0422 mL | 0.2110 mL | 0.4220 mL | 1.0549 mL | |
| 100 mM | 0.0338 mL | 0.1688 mL | 0.3376 mL | 0.8439 mL |