Latrepirdine dihydrochloride
Based on 1 Customer Validation
Latrepirdine dihydrochloride is a neuroactive compound with antagonist activity at histaminergic, α-adrenergic, and serotonergic receptors. Latrepirdine stimulates amyloid precursor protein (APP) catabolism and amyloid-β (Aβ) secretion.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.65%
- CAS No.: 97657-92-6
- Formule: C21H27Cl2N3
- Masse moléculaire:392.37
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-14537R
Latrepirdine dihydrochloride (Standard)Autophagy Inducer -
HY-100806
Kynurenic acidiGluR/α7 nAChR Antagonist -
HY-B1193
TerfenadineCaspase Activator -
HY-100806R
Kynurenic acid (Standard)iGluR/α7 nAChR Antagonist -
HY-A0077
PerphenazineDopamine Receptor Antagonist -
HY-P1363A
β-Amyloid (1-42), humanAmyloid β Peptide -
HY-P1363B
β-Amyloid (1-42), human, HFIP-treatedβ-Amyloid (1-42) Peptide -
HY-10009
Semagacestatγ-secretase Inhibitor -
HY-N0022
IsoacteosideNatural Product -
HY-19370
FPS-ZM1Amyloid-β Inhibitor -
HY-B1193R
Terfenadine (Standard)Caspase Activator -
HY-P0128
β-Amyloid (25-35)Amyloid β Peptide
Voir tous les produits spécifiques à Isoform Histamine Receptor
MoreVoir tous les produits spécifiques à Isoform Adrenergic Receptor
MoreVoir tous les produits spécifiques à Isoform 5-HT Receptor
More
Activité biologique
Description
IC50 & Target
Amyloid-β (Aβ), Histaminergic receptor, α-adrenergic receptor, Serotonergic receptor[1]
In Vitro
Latrepirdine has been reported to possess several properties that are potentially relevant to the treatment of neurodegenerative diseases: (1) protection of cultured cells from the cytotoxicity of amyloid-β (Aβ) peptide; (2) stabilization of mitochondrial function and calcium homeostasis; (3) modulation of Aβ release from cultured cells, isolated intact nerve terminals, and from hippocampal neurons in living mouse brain; and (4) promotion of neurogenesis in the murine hippocampus. Treatment of cultured mammalian cells with Latrepirdine leads to enhanced mTOR- and Atg5-dependent autophagy. Latrepirdine modulates Atg5-dependent autophagic activity in a dose-dependent manner and via the mTOR-signaling pathway. HeLa cells stably expressing LC3 fused are treated with EGFP (eGFP-LC3) for 3 or 6 hours in the absence or presence of 50 μM Latrepirdine. Treatment with Latrepirdine for 3 or 6 hours markedly enhances the number of eGFP-LC3 punctae, indicating that Latrepirdine induces formation of autophagosomes. Next, mouse N2a neuroblastoma cells are treated in the absence (vehicle) or presence of 5 nM, 500 nM or 50 μM Latrepirdine for 3 or 6 hours in order to determine the effects of acute drug treatment on the regulation of autophagy. A significant and dose-dependent increase is observed in LC3-II levels in N2a cells following 3- or 6-hour treatment with either 500 nM or 50 μM Latrepirdine. A significant decrease of p-mTOR and p-S6K from N2a cells treated with 50 μM Latrepirdine for 3 hours is observed, whereas the total mTOR and p70S6K levels remain relatively constant[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 97657-92-6
-
Appearance Solid
-
Masse moléculaire 392.37
-
Formule C21H27Cl2N3
-
Color White to khaki
-
SMILES
CN(C1)CCC2=C1C3=CC(C)=CC=C3N2CCC4=CN=C(C)C=C4.Cl.Cl
-
Synonyms
Dimebolin dihydrochloride
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
In Vitro:
H2O : 100 mg/mL (254.86 mM; Need ultrasonic)
DMSO : 6.4 mg/mL (16.31 mM; Need warming; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 0.5 mg/mL (1.27 mM); Clear solution
This protocol yields a clear solution of ≥ 0.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (5.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 0.5 mg/mL (1.27 mM); Clear solution
This protocol yields a clear solution of ≥ 0.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (5.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (254.86 mM); Clear solution; Need ultrasonic
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Protocole
-
Amyloid: Congo Red Amyloid Staining
Congo red amyloid staining is a histochemical method used to detect extracellular amyloid deposits in tissue sections based on the affinity of Congo red dye for β-pleated sheet-rich protein aggregates. When bound to amyloid, Congo red produces characteristic apple-green birefringence under polarized light microscopy, which is widely regarded as a diagnostic feature of amyloid deposition in histopathology. The diagnostic principle relies on the combination of dye binding (congophilia) and optical anisotropy under polarized illumination, which distinguishes amyloid from most non-amyloid eosinophilic extracellular deposits in routine histological evaluation. Amyloid identification by Congo red staining remains a cornerstone in diagnostic pathology despite the availability of adjunct methods such as immunohistochemistry and mass spectrometry, particularly because of its ability to localize deposits directly within tissue architecture. The specificity of Congo red-positive deposits is incre
-
Alzheimer’s Disease Modeling
Alzheimer’s Disease (AD) is a neurodegenerative disorder characterized by a progressive decline in cognitive functions and loss of specific types of neurons and synapses. Alzheimer's symptoms can be simulated in mice by injecting drugs (such as Aβ) or genetically modified.
Pureté et documentation
-
Fiche technique (280 KB)
-
SDS (418 KB)
- English - EN (418 KB)
- Français - FR (418 KB)
- Deutsch - DE (418 KB)
- Norwegian - NO (418 KB)
- Español - ES (418 KB)
- Swedish - SV (418 KB)
- Italian - IT (418 KB)
- Korean - KR (418 KB)
- Portuguese - PT (418 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 2.5486 mL | 12.7431 mL | 25.4861 mL | 63.7154 mL |
| 5 mM | 0.5097 mL | 2.5486 mL | 5.0972 mL | 12.7431 mL | |
| 10 mM | 0.2549 mL | 1.2743 mL | 2.5486 mL | 6.3715 mL | |
| 15 mM | 0.1699 mL | 0.8495 mL | 1.6991 mL | 4.2477 mL | |
| H2O | 20 mM | 0.1274 mL | 0.6372 mL | 1.2743 mL | 3.1858 mL |
| 25 mM | 0.1019 mL | 0.5097 mL | 1.0194 mL | 2.5486 mL | |
| 30 mM | 0.0850 mL | 0.4248 mL | 0.8495 mL | 2.1238 mL | |
| 40 mM | 0.0637 mL | 0.3186 mL | 0.6372 mL | 1.5929 mL | |
| 50 mM | 0.0510 mL | 0.2549 mL | 0.5097 mL | 1.2743 mL | |
| 60 mM | 0.0425 mL | 0.2124 mL | 0.4248 mL | 1.0619 mL | |
| 80 mM | 0.0319 mL | 0.1593 mL | 0.3186 mL | 0.7964 mL | |
| 100 mM | 0.0255 mL | 0.1274 mL | 0.2549 mL | 0.6372 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Latrepirdine dihydrochloride Related Classifications
HY-14537 Related Classifications
Powered by Bioz