YTH-IN-1
Based on 1 Customer Validation
YTH-IN-1 (compound N-7) is a pan-YTH domain inhibitor with the IC50 values of 39 μM, 34 μM, 35 μM, 48 μM and 30 μM for human YTHYTHDF1, YTHYTHDF2, YTHYTHDF3, YTHYTHDC1, and YTHYTHDC2, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.66%
- CAS No.: 2189366-92-3
- Formule: C18H24N6O3
- Masse moléculaire:372.42
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
|
YTHDF1 39 μM (IC50) |
YTHDF2 34 μM (IC50) |
YTHDF3 35 μM (IC50) |
YTHDC1 48 μM (IC50) |
YTHDC2 30 μM (IC50) |
Chemical Information
-
CAS No. 2189366-92-3
-
Appearance Solid
-
Masse moléculaire 372.42
-
Formule C18H24N6O3
-
Color White to off-white
-
SMILES
O=C(C1)NCC21CCN(C3=C4N=CN(C5CC(CO)(CO)C5)C4=NC=N3)C2
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
H2O : 100 mg/mL (268.51 mM; Need ultrasonic)
DMSO : 2.5 mg/mL (6.71 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 0.25 mg/mL (0.67 mM); Clear solution
This protocol yields a clear solution of ≥ 0.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (2.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 0.25 mg/mL (0.67 mM); Clear solution
This protocol yields a clear solution of ≥ 0.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (2.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureté et documentation
-
Fiche technique (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 2.6851 mL | 13.4257 mL | 26.8514 mL | 67.1285 mL |
| 5 mM | 0.5370 mL | 2.6851 mL | 5.3703 mL | 13.4257 mL | |
| H2O | 10 mM | 0.2685 mL | 1.3426 mL | 2.6851 mL | 6.7129 mL |
| 15 mM | 0.1790 mL | 0.8950 mL | 1.7901 mL | 4.4752 mL | |
| 20 mM | 0.1343 mL | 0.6713 mL | 1.3426 mL | 3.3564 mL | |
| 25 mM | 0.1074 mL | 0.5370 mL | 1.0741 mL | 2.6851 mL | |
| 30 mM | 0.0895 mL | 0.4475 mL | 0.8950 mL | 2.2376 mL | |
| 40 mM | 0.0671 mL | 0.3356 mL | 0.6713 mL | 1.6782 mL | |
| 50 mM | 0.0537 mL | 0.2685 mL | 0.5370 mL | 1.3426 mL | |
| 60 mM | 0.0448 mL | 0.2238 mL | 0.4475 mL | 1.1188 mL | |
| 80 mM | 0.0336 mL | 0.1678 mL | 0.3356 mL | 0.8391 mL | |
| 100 mM | 0.0269 mL | 0.1343 mL | 0.2685 mL | 0.6713 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
YTH-IN-1 Related Classifications
HY-168610 Related Classifications
Powered by Bioz