Lincomycin hydrochloride monohydrate
Based on 5 publication(s) in Google Scholar
Lincomycin (U-10149) hydrochloride monohydrate is an orally active lincosamide antibiotic. Lincomycin hydrochloride monohydrate binds to the ribosomes of Gram-positive bacteria to inhibit protein synthesis. Lincomycin hydrochloride monohydrate can inhibit chloroplast translation, disrupt chloroplast integrity, and activate chloroplast-to-nucleus retrograde signaling in Arabidopsis thaliana seedlings. Lincomycin hydrochloride monohydrate induces alterations in lipid profiles and liver injury, disrupts blood glucose and insulin levels, and increases growth rate in mice.
For research use only. We do not sell to patients.
- Purity: 99.74%
- CAS No.: 7179-49-9
- Formula: C18H37ClN2O7S
- Molecular Weight:461.01
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Anti-Infection Compound Library
HY-L002
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Natural Product Library
HY-L021
-
FDA-Approved Drug Library
HY-L022
-
Anti-Aging Compound Library
HY-L034
-
Drug Repurposing Compound Library
HY-L035
-
Anti-diabetic Compound Library
HY-L040
-
Antibacterial Compound Library
HY-L049
-
Anti-COVID-19 Compound Library
HY-L052
-
Orally Active Compound Library
HY-L061
-
FDA Approved & Pharmacopeial Drug Library
HY-L066
-
Antibiotics Library
HY-L067
-
Microbial Metabolite Library
HY-L084
-
Human Metabolite Library
HY-L123
-
Off-patent Drug Library
HY-L141
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Natural Product Library Plus
HY-L021P
-
Drug Repurposing Compound Library Plus
HY-L035P
-
FDA-Approved Drug Library Plus
HY-L022P
-
FDA-Approved Drug Library Mini
HY-L022M
-
Natural Product and Natural Product-Like Compound Library
HY-L021M
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
High-Throughput Natural Product Library
HY-L206
-
Mass Spectrometry Human Metabolite Library
HY-L215
-
Mass Spectrometry Natural Product Library
HY-L262
Publications Citing Use of MedChemExpress (MCE) Lincomycin hydrochloride monohydrate
MoreAll DNA/RNA Synthesis Isoforms
MoreAll Antibiotic Isoforms
More
Biological Activity
Lincomycin (0.5-10 μg/mL; 10 days) hydrochloride monohydrate can enhance the biosynthesis of actinorhodin and undecylprodigiosin in liquid-cultured Streptomyces coelicolor A3(2) 1147[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:ICR (6-week-old male)[3]
-
Dosage:33 mg/kg
-
Administration:p.o.; ad libitum daily; 8 weeks
-
Result:Resulted in a significant
increase in growth rate of mice (50.11 %) over an 8 weeks period.
Caused suppression in inflammatory response.
Exhibited altered lipid profiles and liver damage suggestive of early-stage non-alcoholic fatty liver disease (NAFLD).
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 7179-49-9
-
Appearance Solid
-
Molecular Weight 461.01
-
Formula C18H37ClN2O7S
-
Color White to off-white
-
SMILES
C[C@@H](O)[C@](NC([C@H]1N(C)C[C@H](CCC)C1)=O)([H])[C@@]2([H])O[C@H](SC)[C@H](O)[C@@H](O)[C@H]2O.Cl.O
-
Synonyms
U-10149 hydrochloride monohydrate
-
Initial Source
Streptomyces linkei
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (5)
-
Journal Impact Factor
-
Most Recent
-
Adv Sci (Weinh)
Targeting Peptostreptococcus anaerobius with an Iron-Based Nanozyme Reverses Ferroptosis Resistance and Enhances Antitumor Immunity in Colorectal Cancer. [Abstract]2026 Jan 12:e16272. PMID: 41524179 -
Chemosphere
Mass-balance-model-based evaluation of sewage treatment plant contribution to residual pharmaceuticals in environmental waters. [Abstract]2019 Jun:225:378-387. PMID: 30884299 -
-
Microb Biotechnol
Attenuator LRR - a regulatory tool for modulating gene expression in Gram-positive bacteria. [Abstract]2021 Nov;14(6):2538-2551. PMID: 33720523 -
Microbiol Spectr
2025 Aug 29:e0059025. PMID: 40879403
Solvent & Solubility
DMSO : ≥ 100 mg/mL (216.92 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 50 mg/mL (108.46 mM; Need ultrasonic)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.42 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.42 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 120 mg/mL (260.30 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (283 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
References
[1]. Veciana N, et al. BBX16 mediates the repression of seedling photomorphogenesis downstream of the GUN1/GLK1 module during retrograde signalling. New Phytol. 2022;234(1):93-106. [Content Brief]
[2]. Imai Y, et al. Lincomycin at Subinhibitory Concentrations Potentiates Secondary Metabolite Production by Streptomyces spp. Appl Environ Microbiol. 2015;81(11):3869-3879. [Content Brief]
[3]. Ni H, et al. Lincomycin as a growth-promoting antibiotic induces metabolic and immune dysregulation in animals. Sci Total Environ. 2024;957:177780. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.1692 mL | 10.8458 mL | 21.6915 mL | 54.2288 mL |
| 5 mM | 0.4338 mL | 2.1692 mL | 4.3383 mL | 10.8458 mL | |
| 10 mM | 0.2169 mL | 1.0846 mL | 2.1692 mL | 5.4229 mL | |
| 15 mM | 0.1446 mL | 0.7231 mL | 1.4461 mL | 3.6153 mL | |
| 20 mM | 0.1085 mL | 0.5423 mL | 1.0846 mL | 2.7114 mL | |
| 25 mM | 0.0868 mL | 0.4338 mL | 0.8677 mL | 2.1692 mL | |
| 30 mM | 0.0723 mL | 0.3615 mL | 0.7231 mL | 1.8076 mL | |
| 40 mM | 0.0542 mL | 0.2711 mL | 0.5423 mL | 1.3557 mL | |
| 50 mM | 0.0434 mL | 0.2169 mL | 0.4338 mL | 1.0846 mL | |
| 60 mM | 0.0362 mL | 0.1808 mL | 0.3615 mL | 0.9038 mL | |
| 80 mM | 0.0271 mL | 0.1356 mL | 0.2711 mL | 0.6779 mL | |
| 100 mM | 0.0217 mL | 0.1085 mL | 0.2169 mL | 0.5423 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Powered by Bioz