HDAC6-IN-33
Based on 1 Customer Validation
HDAC6-IN-33 (compound 6) is a selective and irreversible HDAC6 inhibitor with an IC50 of 193 nM. HDAC6-IN-33 shows no activity against HDAC1-4. HDAC6-IN-33 is a tight-binding HDAC6 inhibitor capable of inhibiting HDAC6 via a two-step slow-binding mechanism.
For research use only. We do not sell to patients.
- Purity: 98.96%
- CAS No.: 2444302-23-0
- Formula: C14H11F2N5O
- Molecular Weight:303.27
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
|
HDAC6 193 nM (IC50) |
Chemical Information
-
CAS No. 2444302-23-0
-
Appearance Solid
-
Molecular Weight 303.27
-
Formula C14H11F2N5O
-
Color White to off-white
-
SMILES
FC(F)C(O1)=NN=C1C(C=N2)=CN=C2NCC3=CC=CC=C3
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (329.74 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2974 mL | 16.4870 mL | 32.9739 mL | 82.4348 mL |
| 5 mM | 0.6595 mL | 3.2974 mL | 6.5948 mL | 16.4870 mL | |
| 10 mM | 0.3297 mL | 1.6487 mL | 3.2974 mL | 8.2435 mL | |
| 15 mM | 0.2198 mL | 1.0991 mL | 2.1983 mL | 5.4957 mL | |
| 20 mM | 0.1649 mL | 0.8243 mL | 1.6487 mL | 4.1217 mL | |
| 25 mM | 0.1319 mL | 0.6595 mL | 1.3190 mL | 3.2974 mL | |
| 30 mM | 0.1099 mL | 0.5496 mL | 1.0991 mL | 2.7478 mL | |
| 40 mM | 0.0824 mL | 0.4122 mL | 0.8243 mL | 2.0609 mL | |
| 50 mM | 0.0659 mL | 0.3297 mL | 0.6595 mL | 1.6487 mL | |
| 60 mM | 0.0550 mL | 0.2748 mL | 0.5496 mL | 1.3739 mL | |
| 80 mM | 0.0412 mL | 0.2061 mL | 0.4122 mL | 1.0304 mL | |
| 100 mM | 0.0330 mL | 0.1649 mL | 0.3297 mL | 0.8243 mL |