UNC3866
Based on 3 publication(s) in Google Scholar
UNC3866 is a potent antagonist of the CBX7-H3 interaction as determined by AlphaScreen (IC50=66±1.2 nM) and is more than 100-fold selective for CBX7 over the other nine members of this methyl-lysine (Kme) reader panel.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.02%
- CAS No.: 1872382-47-2
- 화학식: C43H66N6O8
- 분자량:795.02
-
보관:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
-
Biological Activity
-
Chemical Information
-
용액&용해도
- Protocol
- 순도&문서
- References
-
Help & FAQs
-
Epigenetics Compound Library
HY-L005
-
Histone Modification Research Compound Library
HY-L024
-
Anti-Cancer Compound Library
HY-L025
-
Peptidomimetic Library
HY-L033
-
Reprogramming Compound Library
HY-L039
-
Chemical Probe Library
HY-L063
-
Anti-Blood Cancer Compound Library
HY-L079
-
Targeted Diversity Library
HY-L099
-
Peptide Library
HY-L105
-
Highly Selective Inhibitors Library
HY-L158
-
Anti-Hematopathy Compound Library
HY-L171
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Peptide Compound Library
HY-L105S
-
Bioactive Compound Library
HY-L001
-
Methylation Compound Library
HY-L203
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Publications Citing Use of MedChemExpress (MCE) UNC3866
MoreAll Histone Methyltransferase Isoforms
More
Biological Activity
IC50: 66±1.2 nM (CBX7)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| PC-3 | GI50 |
7.6 μM
Compound: UNC3866
|
Antiproliferative activity against human PC3 cells after 3 days by DAPI staining-based microscopic analysis
Antiproliferative activity against human PC3 cells after 3 days by DAPI staining-based microscopic analysis
|
[PMID: 28478342] |
UNC3866, a potent antagonist of the methyl-lysine (Kme) reading function of the Polycomb CBX and CDY families of chromodomains. UNC3866 binds the chromodomains of CBX4 and CBX7 most potently with a Kd of 100 nM for each, and is 6- to 18-fold selective versus seven other CBX and CDY chromodomains while being highly selective versus >250 other protein targets. UNC3866 inhibits PC3 cell proliferation, a known CBX7 phenotype, while UNC4219, a methylated negative control compound, has negligible effects. UNC3866 is a potent and cellularly active antagonist of PRC1 chromodomains. UNC3866 is the most potent ligand reported for CBX7 with a Kd of 97±2.4 nM. UNC3866 is equipotent for CBX4, which is most similar to CBX7, while it is 18-, 6- and 12-fold selective for CBX4/7 over CBX2, -6 and -8, respectively. Additionally, UNC3866 is 65-fold selective for CBX4/7 over CDY1 and 9-fold selective for CBX4/7 over CDYL1b and CDYL2[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1872382-47-2
-
Appearance Solid
-
분자량 795.02
-
화학식 C43H66N6O8
-
Color White to off-white
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
Human iPSC-based Modeling of Pulmonary Fibrosis Reveals p300/CBP Inhibition Suppresses Alveolar Transitional Cell State. [Abstract]2026 Feb 12;17(1):1214. PMID: 41680175 -
Acta Pharmacol Sin
2022 Feb;43(2):457-469. PMID: 33850273 -
용액&용해도
DMSO : 100 mg/mL (125.78 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (3.14 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (3.14 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
The effect of UNC3866 on the methyltransferase activity of G9a, EHMT1, SUV39H1, SUV39H2, SETDB1, SETD8, SUV420H1, SUV420H2, SETD7, MLL1 trimeric complex, MLL3 tetrameric complex, EZH2 trimeric complex, PRMT1, PRMT3, PRMT5-MEP50 complex, PRMT6, PRMT7, PRMT8, PRDM9, SETD2, SMYD2, SMYD3, BCDIN3D and DNMT1 is assessed by monitoring the incorporation of tritium-labeled methyl group to lysine or arginine residues of peptide substrates using Scintillation Proximity Assay (SPA). Assays are performed in a 20 μL reaction mixture containing 3H-SAM at substrate concentrations close to the Km values for each enzyme. Three concentrations (1 μM, 10 μM, and 50 μM) of UNC3866 are used in all selectivity assays. To stop the enzymatic reactions, 7.5 M Guanidine hydrochloride is added, followed by 180 μL of buffer (20 mM Tris, pH 8.0). The reactions are mixed and then transferred to a 96-well FlashPlate. The reaction mixtures in Flash plates are incubated for 1 hour and the CPM are measured using a TopCount plate reader. The CPM counts in the absence of compound for each data set are defined as 100% activity. In the absence of the enzyme, the CPM counts in each data set are defined as background (0%)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
PC3 cells are seeded at 200 cells/well into 24-well plates. Cells are allowed to adhere overnight. The media (DMEM supplemented with 10 % FBS) is then exchanged with fresh media containing DMSO, UNC3866 or UNC4219. On day three, the media are exchanged with fresh media containing DMSO, UNC3866 or UNC4219. For dose-response studies, the EC50 is derived from a six-point titration ranging from 100 μM to 0.4 μM of UNC3866 or UNC4219. At day 0, 3 or 6, cells are fixed with ice-cold methanol for 30 sec. and rehydrated with PBS. Nuclei of the cells are stained with DAPI (0.05 μg/mL) and numerated using High Content Microscopy. For dose-response studies, the cell count of UNC3866- or UNC4219-treated cells is normalized to the average cell count of DMSO-treated cells. The EC50 is calculated using the “log[inhibitor] vs. the normalized response-Variable slope” equation in GraphPad Prism 5[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
순도&문서
-
Data Sheet (278 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.2578 mL | 6.2891 mL | 12.5783 mL | 31.4457 mL |
| 5 mM | 0.2516 mL | 1.2578 mL | 2.5157 mL | 6.2891 mL | |
| 10 mM | 0.1258 mL | 0.6289 mL | 1.2578 mL | 3.1446 mL | |
| 15 mM | 0.0839 mL | 0.4193 mL | 0.8386 mL | 2.0964 mL | |
| 20 mM | 0.0629 mL | 0.3145 mL | 0.6289 mL | 1.5723 mL | |
| 25 mM | 0.0503 mL | 0.2516 mL | 0.5031 mL | 1.2578 mL | |
| 30 mM | 0.0419 mL | 0.2096 mL | 0.4193 mL | 1.0482 mL | |
| 40 mM | 0.0314 mL | 0.1572 mL | 0.3145 mL | 0.7861 mL | |
| 50 mM | 0.0252 mL | 0.1258 mL | 0.2516 mL | 0.6289 mL | |
| 60 mM | 0.0210 mL | 0.1048 mL | 0.2096 mL | 0.5241 mL | |
| 80 mM | 0.0157 mL | 0.0786 mL | 0.1572 mL | 0.3931 mL | |
| 100 mM | 0.0126 mL | 0.0629 mL | 0.1258 mL | 0.3145 mL |
Powered by Bioz