MMPIP hydrochloride
Based on 1 Customer Validation
MMPIP hydrochloride is an allosteric metabotropic glutamate receptor 7 (mGluR7) selective antagonist (KB values 24 -30 nM). MMPIP hydrochloride acts as a pharmacological tool for elucidating the roles of mGluR7 on central nervous system functions. MMPIP hydrochloride alleviates pain and normalizes affective and cognitive behavior in neuropathic mice.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 98.31%
- CAS No.: 1215566-78-1
- 화학식: C19H16ClN3O3
- 분자량:369.80
-
보관:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
HY-103565
AMN082mGluR7 Agonist -
HY-70059
LY341495mGluR Antagonist -
HY-14609
MPEP HydrochloridemGlu5 Receptor Antagonist -
HY-114403
VU6012962mGlu7 NAM -
HY-14569
CDPPBmGluR5 Modulator -
HY-103111R
MMPIP hydrochloride (Standard)Reference Standard -
HY-110152
LSN2463359mGlu5 Modulator -
HY-14611
3,3'-DifluorobenzaldazinemGluR5 Positive Allosteric Modulator -
HY-103575
MFZ 10-7mGluR5 Antagonist -
HY-103575R
MFZ 10-7 (Standard)Reference Standard -
HY-14417B
VU0155041 sodiummGluR4 Allosteric Agonist
Biological Activity
제품 설명
IC50 & Target
[1]|
mGlu7 |
In Vitro
MMPIP inhibits L-(+)-2-amino-4-phosphonobutyric acid (L-AP4; 0.5 mM)-induced intracellular Ca2+ mobilization in Chinese hamster ovary (CHO) cells coexpressing rat mGluR7 with Gα15 (IC50=26 nM) [1].
In CHO cells expressing rat mGluR7, MMPIP inhibits L-AP4-induced inhibition of forskolin-stimulated cAMP accumulation (IC50 220 nM)[1].
MMPIP also antagonizes L-AP4-induced inhibition of cAMP accumulation with an IC50 of 610 nM in CHO-human mGluR7/Gα15[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MMPIP (10 mg/kg) rescues the MK-801 (0.1 mg/kg)-induced cognitive impairments, by improving the choice accuracy[2].
Zamifenacin exhibits short elimination half-lives (plasma 1.16 h, brain 1.75 h) following i.p. administration (10 mg/kg) in mice[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1215566-78-1
-
Appearance Solid
-
분자량 369.80
-
화학식 C19H16ClN3O3
-
Color Light yellow to green yellow
-
SMILES
O=C1C2=C(ON=C2C3=CC=NC=C3)C=C(C4=CC=C(OC)C=C4)N1C.[H]Cl
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
용액&용해도
In Vitro:
DMSO : 10 mg/mL (27.04 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1 mg/mL (2.70 mM); Clear solution
This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (277 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Gentaroh Suzuki, et al. In vitro pharmacological characterization of novel isoxazolopyridone derivatives as allosteric metabotropic glutamate receptor 7 antagonists. J Pharmacol Exp Ther. 2007 Oct;323(1):147-56. [Content Brief]
[2]. Paulina Cieślik, et al. Negative Allosteric Modulators of mGlu 7 Receptor as Putative Antipsychotic Drugs. Front Mol Neurosci. 2018 Sep 20;11:316. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7042 mL | 13.5208 mL | 27.0416 mL | 67.6041 mL |
| 5 mM | 0.5408 mL | 2.7042 mL | 5.4083 mL | 13.5208 mL | |
| 10 mM | 0.2704 mL | 1.3521 mL | 2.7042 mL | 6.7604 mL | |
| 15 mM | 0.1803 mL | 0.9014 mL | 1.8028 mL | 4.5069 mL | |
| 20 mM | 0.1352 mL | 0.6760 mL | 1.3521 mL | 3.3802 mL | |
| 25 mM | 0.1082 mL | 0.5408 mL | 1.0817 mL | 2.7042 mL |
MMPIP hydrochloride Related Classifications
HY-103111 Related Classifications
Powered by Bioz