PU02
Based on 1 Customer Validation
PU02, a derivative of 6-MP (HY-13677), is a negative allosteric modulator (NAM) of 5-HT3 receptor, with IC50 values of 0.36 and 0.73 μM in HEK293 cells transfected with human 5-HT3A and 5-HT3AB receptors respectively.
For research use only. We do not sell to patients.
- Purity: 98.92%
- CAS No.: 313984-77-9
- Formula: C16H12N4S
- Molecular Weight:292.36
-
Storage:
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
GPCR/G Protein Compound Library
HY-L006
-
Neuronal Signaling Compound Library
HY-L013
-
Anti-Cancer Compound Library
HY-L025
-
Neurotransmitter Receptor Compound Library
HY-L062
-
Anti-Alzheimer's Disease Compound Library
HY-L069
-
Anti-Parkinson's Disease Compound Library
HY-L085
-
Neurodegenerative Disease-related Compound Library
HY-L086
-
5-HT Receptor Compound Library
HY-L121
-
Coagulation and Anti-coagulation Compound Library
HY-L136
-
Heterocyclic Compound Library
HY-L138
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Cell Death Library
HY-L162
-
Allosteric Modulators (AMs) Compound Library
HY-L170
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
All 5-HT Receptor Isoforms
More
Biological Activity
|
5-HT3A Receptor |
5-HT3AB Receptor |
5-HT3A Receptor 0.36 μM (IC50) |
5-HT 3 AB 0.73 μM (IC50) |
PU02 (NMMP) (0-200 μM) leads to a steady decrease in cell viability of HepG2 cells (IC50=48.585 μM). PU02 (NMMP) shows less toxicity on L02 cells than did 6-MP after 48 h of treatment[2].
PU02 (NMMP) at 6.25 or 25 μM exhibits inhibitory effects on the viability of the tested cell lines, including SMMC-7721, MDA-MB-231, RKO and HCT-8 cells[2].
PU02 (NMMP) induces cell cycle arrest at the G2/M phase. PU02 (NMMP) downregulats the expression of cyclin B1/D1 and CDK4 in a time-dependent manner in HepG2 cells,but the expression of cyclin E is not affected[2].
PU02 (NMMP)-treated cells exhibits a significant increase in caspase-3 cleavage, suggesting enhanced apoptotic activity[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HepG2 cells.
-
Concentration:6.26, 12.5, 25, 50 μM.
-
Incubation Time:6, 12, 24, 36 h.
-
Result:Induced mitochondria-dependent apoptosis.
Chemical Information
-
CAS No. 313984-77-9
-
Appearance Solid
-
Molecular Weight 292.36
-
Formula C16H12N4S
-
Color White to off-white
-
SMILES
C12=NC=NC(SCC3=C4C=CC=CC4=CC=C3)=C1N=CN2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
DMSO : 250 mg/mL (855.11 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (7.11 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (7.11 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Sarah M Trattnig, et al. Discovery of a novel allosteric modulator of 5-HT3 receptors: inhibition and potentiation of Cys-loop receptor signaling through a conserved transmembrane intersubunit site. J Biol Chem. 2012 Jul 20;287(30):25241-54. [Content Brief]
[2]. Xiao-Guang Yang, et al. 6-[(1-naphthylmethyl)sulfanyl]-9H-purine induces G2/M phase arrest and apoptosis in human hepatocellular carcinoma HepG2 cells. Eur J Pharmacol. 2012 Nov 15;695(1-3):27-33. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.4204 mL | 17.1022 mL | 34.2044 mL | 85.5110 mL |
| 5 mM | 0.6841 mL | 3.4204 mL | 6.8409 mL | 17.1022 mL | |
| 10 mM | 0.3420 mL | 1.7102 mL | 3.4204 mL | 8.5511 mL | |
| 15 mM | 0.2280 mL | 1.1401 mL | 2.2803 mL | 5.7007 mL | |
| 20 mM | 0.1710 mL | 0.8551 mL | 1.7102 mL | 4.2756 mL | |
| 25 mM | 0.1368 mL | 0.6841 mL | 1.3682 mL | 3.4204 mL | |
| 30 mM | 0.1140 mL | 0.5701 mL | 1.1401 mL | 2.8504 mL | |
| 40 mM | 0.0855 mL | 0.4276 mL | 0.8551 mL | 2.1378 mL | |
| 50 mM | 0.0684 mL | 0.3420 mL | 0.6841 mL | 1.7102 mL | |
| 60 mM | 0.0570 mL | 0.2850 mL | 0.5701 mL | 1.4252 mL | |
| 80 mM | 0.0428 mL | 0.2138 mL | 0.4276 mL | 1.0689 mL | |
| 100 mM | 0.0342 mL | 0.1710 mL | 0.3420 mL | 0.8551 mL |
PU02 Related Classifications
HY-103118 Related Classifications
Powered by Bioz