Polygalaxanthone III
Based on 1 Customer Validation
Polygalaxanthone III is a representative xanthone component of Polygala tenuifolia. Polygalaxanthone III inhibits chlorzoxazone 6-hydroxylation catalyzed by CYP2E1, with an IC50 of 50.56 μM. Polygalaxanthone III repairs skin damage induced by M. furfur via activating STAT3 phosphorylation and exerts anti-inflammatory effects. Polygalaxanthone III can be used for research on M. furfur-related skin damage.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.28%
- CAS No.: 162857-78-5
- Formule: C25H28O15
- Masse moléculaire:568.48
-
Stockage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Anti-Infection Compound Library
HY-L002
-
Immunology/Inflammation Compound Library
HY-L007
-
JAK/STAT Compound Library
HY-L008
-
Metabolism/Protease Compound Library
HY-L012
-
Stem Cell Signaling Compound Library
HY-L017
-
Natural Product Library
HY-L021
-
Small Molecule Immuno-Oncology Compound Library
HY-L031
-
Anti-Aging Compound Library
HY-L034
-
Antioxidant Compound Library
HY-L037
-
Oxygen Sensing Compound Library
HY-L045
-
Phenols Library
HY-L057
-
Traditional Chinese Medicine Active Compound Library
HY-L065
-
Anti-Lung Cancer Compound Library
HY-L075
-
Anti-Pancreatic Cancer Compound Library
HY-L077
-
Anti-Obesity Compound Library
HY-L087
-
Mitochondria-Targeted Compound Library
HY-L089
-
Transcription Factor-Targeted Library
HY-L090
-
Anti-inflammatory Traditional Chinese Medicine Active Compound Library
HY-L114
-
Plant-Sourced Natural Product Library
HY-L115
-
Anti-Prostate Cancer Compound Library
HY-L124
-
Heterocyclic Compound Library
HY-L138
-
Metabolic Enzyme Compound Library
HY-L146
-
Multi-Target Compound Library
HY-L176
-
Radioprotector Library
HY-L178
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Natural Product Library Plus
HY-L021P
-
Natural Product and Natural Product-Like Compound Library
HY-L021M
-
Bioactive Compound Library
HY-L001
-
Cell Proliferation Compound Library
HY-L201
-
High-Throughput Bioactive Compound Library
HY-L205
-
High-Throughput Natural Product Library
HY-L206
-
Ancient Chinese Classical Formulas Traditional Chinese Medicine Active Compound Library
HY-L209
-
Mongolian Medicine Compound Library
HY-L238
-
Natural Product Diversity Scaffold Library
HY-L245
-
Lactylation Compound Library
HY-L249
-
Mass Spectrometry Natural Product Library
HY-L262
Activité biologique
|
STAT3 |
CYP2E1 |
Polygalaxanthone III (0.5-2.0 mM; 24 h post-stimulation/6 h pre-incubation) significantly reduces lipid droplet formation in M. furfur-stimulated HaCaT cells, but shows no such effect when administered prior to stimulation[1].
Polygalaxanthone III (0.13-1.0 mM) exerts no significant inhibitory effect on the in vitro growth of M. furfur[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| Species | Dose | Route | Tmax | Cmax | AUC0-24 | AUC0-∞ | T1/2 | MRT |
|---|---|---|---|---|---|---|---|---|
| Rat[2] | 25 mg/kg | p.o. | 0.92 h | 234.89 ng/mL | 1828.39 ng·h/mL | 2053.13 ng·h/mL | 7.28 h | 11.5 h |
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6 (8-12 weeks old, 20 g, half male and half female, SPF grade, skin abrasion + topical Malassezia furfur suspension-induced injury)[1]
-
Dosage:1% (w/w); 2% (w/w)
-
Administration:topical; daily; 12 days
-
Result:Significantly promoted wound healing, reduced inflammatory cell infiltration, regularized collagen fiber arrangement, decreased lipid droplet formation in Malassezia furfur-stimulated HaCaT cells, and upregulated the phosphorylation of STAT3 to repair Malassezia-stimulated skin injury.
Chemical Information
-
CAS No. 162857-78-5
-
Appearance Solid
-
Masse moléculaire 568.48
-
Formule C25H28O15
-
Color Light yellow to yellow
-
SMILES
COC1=C(O)C=C(OC(C=C(O)C([C@H]2[C@H](O)[C@@H](O)[C@H](O)[C@@H](CO[C@@H]3OC[C@@](CO)(O)[C@H]3O)O2)=C4O)=C4C5=O)C5=C1
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvant et solubilité
DMSO : 250 mg/mL (439.77 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (3.66 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (3.66 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (281 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Yang X, et al. Polygalaxanthone III, an Active Ingredient in Polygala japonica Houtt., Repaired Malassezia-Stimulated Skin Injury via STAT3 Phosphorylated Activation. Molecules. 2022 Nov 3;27(21):7520. [Content Brief]
[3]. Li ZL, et al. Effect of oligosaccharide esters and polygalaxanthone Ill from Polygala tenuifolia willd towards cytochrome P450. Zhongguo Zhong Yao Za Zhi. 2014 Nov;39(22):4459-63. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7591 mL | 8.7954 mL | 17.5908 mL | 43.9769 mL |
| 5 mM | 0.3518 mL | 1.7591 mL | 3.5182 mL | 8.7954 mL | |
| 10 mM | 0.1759 mL | 0.8795 mL | 1.7591 mL | 4.3977 mL | |
| 15 mM | 0.1173 mL | 0.5864 mL | 1.1727 mL | 2.9318 mL | |
| 20 mM | 0.0880 mL | 0.4398 mL | 0.8795 mL | 2.1988 mL | |
| 25 mM | 0.0704 mL | 0.3518 mL | 0.7036 mL | 1.7591 mL | |
| 30 mM | 0.0586 mL | 0.2932 mL | 0.5864 mL | 1.4659 mL | |
| 40 mM | 0.0440 mL | 0.2199 mL | 0.4398 mL | 1.0994 mL | |
| 50 mM | 0.0352 mL | 0.1759 mL | 0.3518 mL | 0.8795 mL | |
| 60 mM | 0.0293 mL | 0.1466 mL | 0.2932 mL | 0.7329 mL | |
| 80 mM | 0.0220 mL | 0.1099 mL | 0.2199 mL | 0.5497 mL | |
| 100 mM | 0.0176 mL | 0.0880 mL | 0.1759 mL | 0.4398 mL |
Powered by Bioz