AS-99 TFA
Based on 2 publication(s) in Google Scholar
AS-99 TFA is a first-in-class, potent and selective ASH1L histone methyltransferase inhibitor (IC50= 0.79 μM, Kd= 0.89 μM) with anti-leukemic activity. AS-99 TFA blocks cell proliferation, induces apoptosis and differentiation, downregulates MLL fusion target genes, and reduces the leukemia burden in vivo.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.62%
- CAS No.: 3115178-55-4
- Formule: C29H31F6N5O5S2
- Masse moléculaire:707.71
-
Stockage:
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) AS-99 TFA
More
Customer Validation & Images
-
In Vivo Efficacy Study
-
IHC
-
In Vivo Imaging
Voir tous les produits spécifiques à Isoform Histone Methyltransferase
More
Activité biologique
|
ASH1L/KMT2H |
AS-99 TFA is tested against a panel of 20 histone methyltransferases, including NSD1, NSD2, NSD3, and SETD2. NO significant inhibition is observed at 50 μM of AS-99 TFA on any of the tested histone methyltransferases, indicating over 100-fold selectivity towards ASH1L[1].
AS-99 shows a several fold weaker effect on the proliferation of leukemia cells without MLL1 translocations, such as SET2 and K562, with no or limited effects at 10 μM or higher concentrations[1].
AS-99 (1-8 μM; 7 days) TFA also induces apoptosis in the MLL leukemia cells, but not in the K562 cells, as assessed by the quantification of the Annexin V positive cells[1].
AS-99 TFA suppresses MLL fusion driven transcriptional programs[1].
AS-99 results in a reduced number of H3K36me2 peaks when compared to the DMSO-treated cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MOLM13 cells
-
Concentration:2-6 µM
-
Incubation Time:7 days
-
Result:Led to a dose-dependent downregulation of canonical MLL fusion target genes required for leukemogenesis including MEF2C, DLX2, FLT3, and HOXA9.
AS-99 TFA is used for in vivo studies in mice, which reveals favorable exposure in plasma upon i.v. and i.p. administration (AUC = 9701 hr* ng/mL and 10,699 hr* ng/mL, respectively), suitable half-life (~5-6 h) and Cmax >10 μM[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:8- to 10-week old female NSG mice (bearing MV4;11 cells)[1]
-
Dosage:30 mg/kg
-
Administration:I.p.; q.d., treated for 14 consecutive days
-
Result:Reduced the leukemia burden in the xenotransplantation mouse model of MLL leukemia without affecting blood counts in normal mice.
Chemical Information
-
CAS No. 3115178-55-4
-
Appearance Solid
-
Masse moléculaire 707.71
-
Formule C29H31F6N5O5S2
-
Color Light yellow to yellow
-
SMILES
O=C(C1CN(C)C1)NCC2=CC3=C(C=C2)C(C4=CC=CC(C(N)=S)=C4)=CN3C5CCN(S(=O)(C(F)(F)F)=O)CC5.O=C(O)C(F)(F)F
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
Histone methyltransferase ASH1L primes metastases and metabolic reprogramming of macrophages in the bone niche. [Abstract]2025 May 20;16(1):4681. PMID: 40394007
AS-99 TFA purchased from MedChemExpress. Usage Cited in: Nat Commun. 2025 May 20;16(1):4681. [Abstract]
AS-99 (25 mg/kg, i.p.) treatment significantly suppressed metastases to bone and prolonged the overall survival of mice.
AS-99 TFA purchased from MedChemExpress. Usage Cited in: Nat Commun. 2025 May 20;16(1):4681. [Abstract]
Multiplex IHC staining of TAMs in bone tumors treated with AS-99 (i.p., 25 mg/kg).
AS-99 TFA purchased from MedChemExpress. Usage Cited in: Nat Commun. 2025 May 20;16(1):4681. [Abstract]
2 × 106 PC-3M cells were intracardiac injected into male nude mice, followed by treatment of vehicle or ASH1L inhibitor AS-99 (i.p., 25 mg/kg). Bioluminescent imaging and intensity quantification of metastatic tumors on Day 34 are presented.
-
Adv Sci (Weinh)
ASH1L in Hepatoma Cells and Hepatic Stellate Cells Promotes Fibrosis-Associated Hepatocellular Carcinoma by Modulating Tumor-Associated Macrophages. [Abstract]2024 Dec;11(45):e2404756. PMID: 39377228
Solvant et solubilité
DMSO : 100 mg/mL (141.30 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 12.5 mg/mL (17.66 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (3.53 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (3.53 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (281 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 1.4130 mL | 7.0650 mL | 14.1301 mL | 35.3252 mL |
| 5 mM | 0.2826 mL | 1.4130 mL | 2.8260 mL | 7.0650 mL | |
| 10 mM | 0.1413 mL | 0.7065 mL | 1.4130 mL | 3.5325 mL | |
| 15 mM | 0.0942 mL | 0.4710 mL | 0.9420 mL | 2.3550 mL | |
| DMSO | 20 mM | 0.0707 mL | 0.3533 mL | 0.7065 mL | 1.7663 mL |
| 25 mM | 0.0565 mL | 0.2826 mL | 0.5652 mL | 1.4130 mL | |
| 30 mM | 0.0471 mL | 0.2355 mL | 0.4710 mL | 1.1775 mL | |
| 40 mM | 0.0353 mL | 0.1766 mL | 0.3533 mL | 0.8831 mL | |
| 50 mM | 0.0283 mL | 0.1413 mL | 0.2826 mL | 0.7065 mL | |
| 60 mM | 0.0236 mL | 0.1178 mL | 0.2355 mL | 0.5888 mL | |
| 80 mM | 0.0177 mL | 0.0883 mL | 0.1766 mL | 0.4416 mL | |
| 100 mM | 0.0141 mL | 0.0707 mL | 0.1413 mL | 0.3533 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
AS-99 TFA Related Classifications
HY-141429A Related Classifications
Powered by Bioz