Sulopenem
Based on 2 publication(s) in Google Scholar
Sulopenem (CP-70429) is an orally active, parenteral penem antibiotic with broad-spectrum activities against Gram-positive and Gram-negative bacteria. Sulopenem has the potential for urinary tract infections and intra-abdominal infections treatment. Sulopenem is inactive against Pseudomonas aeruginosa and Xanthomonas maltophilia.
For research use only. We do not sell to patients.
- Purity: 99.16%
- CAS No.: 120788-07-0
- Formula: C12H15NO5S3
- Molecular Weight:349.45
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Sulopenem
MoreAll Beta-lactamase Isoforms
MoreAll Antibiotic Isoforms
More
Biological Activity
|
β-lactam |
Sulopenem has the potential for uncomplicated and complicated urinary tract infections and intra-abdominal infections treatment, including multidrug-resistant (MDR) infections and infections attributable to quinolone-nonsusceptible and/or extended-spectrum β-lactamase (ESBL)-producing Gram-negative bacilli[1].
Sulopenem inhibits the growth of most isolates of aerobic and anaerobic Gram-positive and Gram-negative bacteria, including methicillin-susceptible Staphylococcus aureus, Streptococcus pneumoniae (penicillin-susceptible and -resistant isolates), group A and B β-hemolytic streptococci, Listeria monocytogenes, Enterobacteriaceae, Haemophilus influenzae, and Moraxella catarrhalis but excluding P. aeruginosa and Stenotrophomonas maltophilia, at a concentration of ≤1 μg/mL[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 120788-07-0
-
Appearance Solid
-
Molecular Weight 349.45
-
Formula C12H15NO5S3
-
Color White to yellow
-
SMILES
O=C(C(N12)=C(S[C@@H](CC3)C[S@@]3=O)S[C@]2([H])[C@@H]([C@H](O)C)C1=O)O
-
Synonyms
CP-70429
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Nat Microbiol
Characterization of antibiotic resistomes by reprogrammed bacteriophage-enabled functional metagenomics in clinical strains. [Abstract]2023 Mar;8(3):410-423. PMID: 36759752 -
J Glob Antimicrob Resist
Susceptibility of multidrug-resistant Escherichia coli and Klebsiella pneumoniae to oral antibiotics in Australia. [Abstract]2025 Aug 8:44:435-441. PMID: 40784378
Solvent & Solubility
DMSO : 125 mg/mL (357.70 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.95 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.95 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (279 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
[1]. James A Karlowsky, et al. In Vitro Activity of Sulopenem, an Oral Penem, Against Urinary Isolates of Escherichia coli. Antimicrob Agents Chemother. 2018 Dec 21;63(1):e01832-18. [Content Brief]
[2]. M Minamimura, et al. In Vitro Antibacterial Activity and Beta-Lactamase Stability of CP-70,429 a New Penem Antibiotic. Antimicrob Agents Chemother. 1993 Jul;37(7):1547-51. [Content Brief]
[3]. M Nagashima, et al. In Vitro and in Vivo Activities of Sulopenem Compared With Those of Imipenem and Cephalosporins. Jpn J Antibiot. 1996 Apr;49(4):303-23. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8616 mL | 14.3082 mL | 28.6164 mL | 71.5410 mL |
| 5 mM | 0.5723 mL | 2.8616 mL | 5.7233 mL | 14.3082 mL | |
| 10 mM | 0.2862 mL | 1.4308 mL | 2.8616 mL | 7.1541 mL | |
| 15 mM | 0.1908 mL | 0.9539 mL | 1.9078 mL | 4.7694 mL | |
| 20 mM | 0.1431 mL | 0.7154 mL | 1.4308 mL | 3.5770 mL | |
| 25 mM | 0.1145 mL | 0.5723 mL | 1.1447 mL | 2.8616 mL | |
| 30 mM | 0.0954 mL | 0.4769 mL | 0.9539 mL | 2.3847 mL | |
| 40 mM | 0.0715 mL | 0.3577 mL | 0.7154 mL | 1.7885 mL | |
| 50 mM | 0.0572 mL | 0.2862 mL | 0.5723 mL | 1.4308 mL | |
| 60 mM | 0.0477 mL | 0.2385 mL | 0.4769 mL | 1.1923 mL | |
| 80 mM | 0.0358 mL | 0.1789 mL | 0.3577 mL | 0.8943 mL | |
| 100 mM | 0.0286 mL | 0.1431 mL | 0.2862 mL | 0.7154 mL |