WH244
Based on 1 Customer Validation
WH244 is a BCL-xL and BCL-2 PROTAC degrader with DC50 values of 0.6 nM and 7.4 nM, and Kd values of 6.14 nM and 3.1 nM, respectively. WH244 kills cancer cells dependent on BCL-xL and BCL-2 for survival. WH244 is applicable to relevant research on leukemia.
(Pink: Bcl-2 and Bcl-xL ligand (HY-161415); Blue: VHL ligand (HY-112078); Black: linker (HY-161444)).
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.82%
- CAS No.: 2941088-96-4
- 화학식: C83H105ClF3N13O11S4
- 분자량:1681.51
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
All PROTACs Isoforms
More
Biological Activity
|
Bcl-xL 0.6 nM (DC50) |
Bcl-2 7.4 nM (DC50) |
WH244 (0-100 nM; 1-24 h) potently degrades BCL-xL (DC50 = 0.6 nM) and BCL-2 (DC50 = 7.4 nM) in Jurkat cells in a time-dependent, reversible, VHL-dependent and UPS-dependent manner[1].
WH244 (0.001-1 μM; 72 h) reduces the viability of Jurkat cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Jurkat cells
-
Concentration:0.001, 0.01, 0.1, and 1 μM
-
Incubation Time:72 h
-
Result:Exhibited enhanced potency in reducing Jurkat cell viability.
Chemical Information
-
CAS No. 2941088-96-4
-
Appearance Solid
-
분자량 1681.51
-
화학식 C83H105ClF3N13O11S4
-
Color White to off-white
-
SMILES
CC1=C(C2=CC=C([C@@H](NC([C@@H]3C[C@@H](O)CN3C([C@@H](NC(CN4CCN(CC(N5CCN(C[C@]6(C)CCC(C7=CC=C(Cl)C=C7)=C(CN8CCN(C9=CC=C(C(NS(C%10=CC(S(C(F)(F)F)(=O)=O)=C(N[C@@H](CSC%11=CC=CC=C%11)CCN%12C[C@@H]%13OC[C@H]%12C%13)C=C%10)(=O)=O)=O)C=C9)CC8)C6)CC5)=O)CC4)=O)C(C)(C)C)=O)=O)C)C=C2)SC=N1
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
DMSO : 100 mg/mL (59.47 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (1.49 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (270 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.5947 mL | 2.9735 mL | 5.9470 mL | 14.8676 mL |
| 5 mM | 0.1189 mL | 0.5947 mL | 1.1894 mL | 2.9735 mL | |
| 10 mM | 0.0595 mL | 0.2974 mL | 0.5947 mL | 1.4868 mL | |
| 15 mM | 0.0396 mL | 0.1982 mL | 0.3965 mL | 0.9912 mL | |
| 20 mM | 0.0297 mL | 0.1487 mL | 0.2974 mL | 0.7434 mL | |
| 25 mM | 0.0238 mL | 0.1189 mL | 0.2379 mL | 0.5947 mL | |
| 30 mM | 0.0198 mL | 0.0991 mL | 0.1982 mL | 0.4956 mL | |
| 40 mM | 0.0149 mL | 0.0743 mL | 0.1487 mL | 0.3717 mL | |
| 50 mM | 0.0119 mL | 0.0595 mL | 0.1189 mL | 0.2974 mL |
WH244 Related Classifications
HY-161410 Related Classifications
Powered by Bioz