Isogentisin
Based on 1 Customer Validation
Isogentisin is a cell protector. Isogentisin can shield human umbilical vein endothelial cells (HUVEC) from cell death caused by H202 and UV exposure. Isogentisin can also prevent endothelial damage triggered by smoking by activating cell repair functions to promote cell survival.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.18%
- CAS No.: 491-64-5
- Formule: C14H10O5
- Masse moléculaire:258.23
-
Stockage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
Description
Cellular Effect
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HepG2 | IC50 |
93.21 μM
Compound: 2b
|
Growth inhibition of human HepG2 cells after 24 hrs by MTT assay
Growth inhibition of human HepG2 cells after 24 hrs by MTT assay
|
[PMID: 29609121] |
| MCF7 | IC50 |
>200 μM
Compound: 2b
|
Growth inhibition of human MCF7 cells after 24 hrs by MTT assay
Growth inhibition of human MCF7 cells after 24 hrs by MTT assay
|
[PMID: 29609121] |
| MDA-MB-231 | IC50 |
>200 μM
Compound: 2b
|
Growth inhibition of human MDA-MB-231 cells after 24 hrs by MTT assay
Growth inhibition of human MDA-MB-231 cells after 24 hrs by MTT assay
|
[PMID: 29609121] |
Chemical Information
-
CAS No. 491-64-5
-
Appearance Solid
-
Masse moléculaire 258.23
-
Formule C14H10O5
-
Color Light yellow to yellow
-
SMILES
O=C1C2=C(C=C(C=C2O)O)OC3=C1C=C(C=C3)OC
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvant et solubilité
In Vitro:
DMSO : 50 mg/mL (193.63 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (9.68 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (9.68 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (271 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.8725 mL | 19.3626 mL | 38.7252 mL | 96.8129 mL |
| 5 mM | 0.7745 mL | 3.8725 mL | 7.7450 mL | 19.3626 mL | |
| 10 mM | 0.3873 mL | 1.9363 mL | 3.8725 mL | 9.6813 mL | |
| 15 mM | 0.2582 mL | 1.2908 mL | 2.5817 mL | 6.4542 mL | |
| 20 mM | 0.1936 mL | 0.9681 mL | 1.9363 mL | 4.8406 mL | |
| 25 mM | 0.1549 mL | 0.7745 mL | 1.5490 mL | 3.8725 mL | |
| 30 mM | 0.1291 mL | 0.6454 mL | 1.2908 mL | 3.2271 mL | |
| 40 mM | 0.0968 mL | 0.4841 mL | 0.9681 mL | 2.4203 mL | |
| 50 mM | 0.0775 mL | 0.3873 mL | 0.7745 mL | 1.9363 mL | |
| 60 mM | 0.0645 mL | 0.3227 mL | 0.6454 mL | 1.6135 mL | |
| 80 mM | 0.0484 mL | 0.2420 mL | 0.4841 mL | 1.2102 mL | |
| 100 mM | 0.0387 mL | 0.1936 mL | 0.3873 mL | 0.9681 mL |
Isogentisin Related Classifications
HY-118622 Related Classifications
Powered by Bioz