CHPG sodium salt
Based on 4 publication(s) in Google Scholar
CHPG sodium salt is a selective mGluR5 agonist, and attenuates SO2-induced oxidative stress and inflammation through TSG-6/NF-κB pathway in BV2 microglial cells. CHPG sodium salt protects against traumatic brain injury (TBI) in vitro and in vivo by activation of the ERK and Akt signaling pathways..
For research use only. We do not sell to patients.
- Purity: 99.57%
- CAS No.: 1303993-73-8
- Formula: C8H7ClNNaO3
- Molecular Weight:223.59
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) CHPG sodium salt
More
Biological Activity
|
mGlu5 |
NF-κB |
ERK |
CHPG sodium salt (10-500 μM; 24 hours) significantly increases the cell viability and decreases the LDH release after SO2 derivatives treatment[1].
CHPG sodium salt (0.5 mM; 30 mins ) protects BV2 cells against SO2-induced apoptosis[1].
CHPG sodium salt (0.5 mM; 30 mins) treatment alone increases the expression of TSG-6 in both mRNA and protein levels[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:BV2 microglial cells
-
Concentration:10, 50, 100 and 500 µM
-
Incubation Time:24 hours
-
Result:Increased the cell viability.
-
Cell Line:BV2 microglial cells
-
Concentration:0.5 mM
-
Incubation Time:30 mins
-
Result:Protected BV2 cells against SO2-induced apoptosis.
-
Cell Line:BV2 microglial cells
-
Concentration:0.5 mM
-
Incubation Time:30 mins
-
Result:Increased the expression of TSG-6 in both mRNA and protein levels.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Adult Sprague-Dawley male rats weighing 280-320 g[2]
-
Dosage:250 nM
-
Administration:Injection; for 7 days
-
Result:Reduced significantly cerebral lesion volume.
Chemical Information
-
CAS No. 1303993-73-8
-
Appearance Solid
-
Molecular Weight 223.59
-
Formula C8H7ClNNaO3
-
Color White to off-white
-
SMILES
O=C(O[Na])C(N)C1=CC(O)=CC=C1Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
World J Gastroenterol
Inhibition of metabotropic glutamate receptor-5 alleviates hepatic steatosis by enhancing autophagy via activation of the AMPK signaling pathway. [Abstract]2025 Feb 21;31(7):98852. PMID: 39991675 -
IBRO Neurosci Rep
CHPG's role in regulating apoptosis in heat-stressed microglia through endoplasmic reticulum stress: A new perspective☆. [Abstract]2025 May 26:18:823-829. PMID: 40520000 -
Immunobiology
Liyan Kaiyin Formula relieves reflux pharyngitis by regulating M1 macrophage polarization via the NF-κB/NLRP3 pathway. [Abstract]2025 Jun 28;230(4):153095. PMID: 40602310 -
Solvent & Solubility
DMSO : 100 mg/mL (447.25 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 6.67 mg/mL (29.83 mM; ultrasonic and warming and heat to 80°C)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (11.18 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (11.18 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 5 mg/mL (22.36 mM); Clear solution; Need ultrasonic and warming and heat to 60°C
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (279 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Qiu JL, et al. The selective mGluR5 agonist CHPG attenuates SO2-induced oxidative stress and inflammation through TSG-6/NF-κB pathway in BV2 microglial cells. Neurochem Int. 2015 Jun-Jul;85-86:46-52. [Content Brief]
[2]. Chen T, et al. The selective mGluR5 agonist CHPG protects against traumatic brain injury in vitro and in vivo via ERK and Akt pathway. Int J Mol Med. 2012 Apr;29(4):630-6. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 4.4725 mL | 22.3624 mL | 44.7247 mL | 111.8118 mL |
| 5 mM | 0.8945 mL | 4.4725 mL | 8.9449 mL | 22.3624 mL | |
| 10 mM | 0.4472 mL | 2.2362 mL | 4.4725 mL | 11.1812 mL | |
| 15 mM | 0.2982 mL | 1.4908 mL | 2.9816 mL | 7.4541 mL | |
| 20 mM | 0.2236 mL | 1.1181 mL | 2.2362 mL | 5.5906 mL | |
| 25 mM | 0.1789 mL | 0.8945 mL | 1.7890 mL | 4.4725 mL | |
| DMSO | 30 mM | 0.1491 mL | 0.7454 mL | 1.4908 mL | 3.7271 mL |
| 40 mM | 0.1118 mL | 0.5591 mL | 1.1181 mL | 2.7953 mL | |
| 50 mM | 0.0894 mL | 0.4472 mL | 0.8945 mL | 2.2362 mL | |
| 60 mM | 0.0745 mL | 0.3727 mL | 0.7454 mL | 1.8635 mL | |
| 80 mM | 0.0559 mL | 0.2795 mL | 0.5591 mL | 1.3976 mL | |
| 100 mM | 0.0447 mL | 0.2236 mL | 0.4472 mL | 1.1181 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.