KP-457
Based on 5 publication(s) in Google Scholar
KP-457 is a selective a disintegrin and metalloproteinase 17 (ADAM17) inhibitor, with higher selectivity for ADAM17 than for other MMPs and ADAM10, and IC50s are 11.1 nM (ADAM17), 748 nM (ADAM10), 717 nM (MMP2), 9760 nM (MMP3), 2200 nM (MMP8), 5410 nM (MMP9), 930 nM (MMP13), 2140 nM (MMP14), and 7100 nM (MMP17), respectively.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.88%
- No. CAS: 1365803-52-6
- Fòrmula: C21H24N2O7S2
- Peso molecular:480.55
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Metabolism/Protease Compound Library
HY-L012
-
Differentiation Inducing Compound Library
HY-L038
-
Anti-Cardiovascular Disease Compound Library
HY-L046
-
Anti-Pancreatic Cancer Compound Library
HY-L077
-
Angiogenesis-Related Compound Library
HY-L088
-
Anti-Liver Cancer Compound Library
HY-L101
-
Anti-Pulmonary Fibrosis Compound Library
HY-L125
-
Cancer Stem Cells Compound Library
HY-L135
-
Pain-Related Compound Library
HY-L139
-
Protease Inhibitor Library
HY-L147
-
Highly Selective Inhibitors Library
HY-L158
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Anti-Fibrosis Compound Library
HY-L185
-
High-Throughput Bioactive Compound Library
HY-L205
-
Anti-Rheumatic Arthritis Compound Library
HY-L210
-
Alkyne Compound Library
HY-L258
Publications Citing Use of MedChemExpress (MCE) KP-457
More
Customer Validation & Images
-
Bio/Physico-chemical Assay
-
Bio/Physico-chemical Assay
Actividad biológica
|
ADAM17 11.1 nM (IC50) |
ADAM10 748 nM (IC50) |
MMP2 717 nM (IC50) |
MMP13 930 nM (IC50) |
MMP14 2140 nM (IC50) |
MMP8 2200 nM (IC50) |
MMP9 5410 nM (IC50) |
MMP17 7100 nM (IC50) |
MMP3 9760 nM (IC50) |
KP-457 is a selective metalloproteinase 17 (ADAM17) inhibitor, with higher selectivity for ADAM17 than for other MMPs and ADAM10, and IC50s are 11.1 nM (ADAM17), 748 nM (ADAM10), 717 nM (MMP2), 9760 nM (MMP3), 2200 nM (MMP8), 5410 nM (MMP9), 930 nM (MMP13), 2140 nM (MMP14), and 7100 nM (MMP17), respectively. KP-457 blocks Zn2+ chelation of the catalytic domain of ADAM17. KP-457 (15 μM) retains the expression of GPIbα on iPSC-derived platelets[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 1365803-52-6
-
Appearance Solid
-
Peso molecular 480.55
-
Fòrmula C21H24N2O7S2
-
Color White to off-white
-
SMILES
CS(=O)(NCC1=CC=C(C(N(C=O)O)CS(=O)(C2=CC=C(OCC#CC)C=C2)=O)C=C1)=O
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (5)
-
Journal Impact Factor
-
Most Recent
-
Cancer Cell
Mapping cell type-resolved transcriptomic profiles to patient survival in pancreatic cancer. [Abstract]2026 Jun 11:S1535-6108(26)00257-6. PMID: 42276047 -
Circ Res
2020 Oct 9;127(9):1182-1194. PMID: 32781905 -
J Thromb Haemost
GPIbα shedding in platelets is controlled by strict intracellular containment of both enzyme and substrate. [Abstract]2023 Aug;21(8):2223-2235. PMID: 37001816
KP-457 purchased from MedChemExpress. Usage Cited in: J Thromb Haemost. 2023 Aug;21(8):2223-2235. [Abstract]
Relative glycocalicin levels in platelet supernatant of unstimulated platelets or after 180 minutes stimulation in absence or presence of following inhibitors; marimastat, KP-457, ADAM17 prodomain or human inhibitory anti-ADAM17 monoclonal antibody D1(A12). Glycocalicin levels are expressed relative to that of paired stimulated platelets in the absence of any inhibitor.
-
Biol Reprod
Initial detachment of the mouse oocyte from the zona pellucida is mediated by metallopeptidase activity. [Abstract]2023 Jan 14;108(1):81-97. PMID: 36179245
KP-457 purchased from MedChemExpress. Usage Cited in: Biol Reprod. 2023 Jan 14;108(1):81-97. [Abstract]
KP457 (0, 5, 10, 15 μM; 1.5 h) had no significant effect on oocyte-ZP detachment even at >10 μM.
-
Solvente y solubilidad
DMSO : 125 mg/mL (260.12 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.33 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.33 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocolo
Briefly, 3 × 104 hematopoietic progenitor cells (HPCs) derived from iPS-sacs on C3H10T1/2 feeder cells in the presence of 20 ng/mL vascular endothelial growth factor are transferred on day 14 of culture onto C3H10T1/2 feeder cells in differentiation medium supplemented with 50 ng/mL stem cell factor, 100 ng/mL thrombopoietin, 25 U/mL heparin sodium, and KP-457 at 24°C or 37°C. The medium is refreshed every 3 days, and nonadherent cells are collected and analyzed on days 22-24[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureza y Documentación
-
Ficha de datos (277 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0809 mL | 10.4047 mL | 20.8095 mL | 52.0237 mL |
| 5 mM | 0.4162 mL | 2.0809 mL | 4.1619 mL | 10.4047 mL | |
| 10 mM | 0.2081 mL | 1.0405 mL | 2.0809 mL | 5.2024 mL | |
| 15 mM | 0.1387 mL | 0.6936 mL | 1.3873 mL | 3.4682 mL | |
| 20 mM | 0.1040 mL | 0.5202 mL | 1.0405 mL | 2.6012 mL | |
| 25 mM | 0.0832 mL | 0.4162 mL | 0.8324 mL | 2.0809 mL | |
| 30 mM | 0.0694 mL | 0.3468 mL | 0.6936 mL | 1.7341 mL | |
| 40 mM | 0.0520 mL | 0.2601 mL | 0.5202 mL | 1.3006 mL | |
| 50 mM | 0.0416 mL | 0.2081 mL | 0.4162 mL | 1.0405 mL | |
| 60 mM | 0.0347 mL | 0.1734 mL | 0.3468 mL | 0.8671 mL | |
| 80 mM | 0.0260 mL | 0.1301 mL | 0.2601 mL | 0.6503 mL | |
| 100 mM | 0.0208 mL | 0.1040 mL | 0.2081 mL | 0.5202 mL |
KP-457 Related Classifications
HY-110397 Related Classifications
Powered by Bioz