Dihydrocapsiate
Based on 1 Customer Validation
Dihydrocapsiate, as a compound of capsinoid family, is an orally active TRPV1 agonist. Dihydrocapsiate can be used for the research of metabolism disease.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 96.05%
- No. CAS: 205687-03-2
- Fòrmula: C18H28O4
- Peso molecular:308.41
-
Almacenamiento:
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Membrane Transporter/Ion Channel Compound Library
HY-L011
-
Neuronal Signaling Compound Library
HY-L013
-
Natural Product Library
HY-L021
-
FDA-Approved Drug Library
HY-L022
-
Drug Repurposing Compound Library
HY-L035
-
Phenols Library
HY-L057
-
Orally Active Compound Library
HY-L061
-
FDA Approved & Pharmacopeial Drug Library
HY-L066
-
Mechanoreceptors Compound Library
HY-L095
-
Plant-Sourced Natural Product Library
HY-L115
-
Human Metabolite Library
HY-L123
-
Pain-Related Compound Library
HY-L139
-
Off-patent Drug Library
HY-L141
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Ion Channel Compound Library
HY-L166
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Natural Product Library Plus
HY-L021P
-
Drug Repurposing Compound Library Plus
HY-L035P
-
FDA-Approved Drug Library Plus
HY-L022P
-
FDA-Approved Drug Library Mini
HY-L022M
-
Natural Product and Natural Product-Like Compound Library
HY-L021M
-
Bioactive Compound Library
HY-L001
-
RO5 Drug-like Natural Product Library
HY-L200
-
High-Throughput Bioactive Compound Library
HY-L205
-
High-Throughput Natural Product Library
HY-L206
-
Mass Spectrometry Human Metabolite Library
HY-L215
-
Mass Spectrometry Natural Product Library
HY-L262
Actividad biológica
|
TRPV1 |
Dihydrocapsiate (10, 25 and 50 μM; 48 hours; human preadipocytes) does not affect cell viability[1].
Dihydrocapsiate (10 and 20 μM; 8 days; mature adipocytes) markedly decreases the expression levels of other adipogenic markers (such as SREBP1, FABP4, PLIN1, ADIPOQ and LEPTIN) and inflammatory markers (MCP1 and TNFα), whereas it enhances the expression levels of PGC1α (master regulator of mitochondrial biogenesis) and TBX1 (marker of “brite” cell) [1].
Dihydrocapsiate (25~200 μM; RAW 264.7 cells) prevents NO release and intracellular ROS generation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Human preadipocytes
-
Concentration:10, 25 and 50 μM
-
Incubation Time:48 hours
-
Result:Did not affect cell viability.
-
Cell Line:Mature adipocytes
-
Concentration:10 and 20 μM
-
Incubation Time:8 days
-
Result:Markedly decreased the expression levels of other adipogenic markers (such as SREBP1, FABP4, PLIN1, ADIPOQ and LEPTIN) and inflammatory markers (MCP1 and TNFα), whereas it enhanced the expression levels of PGC1α (master regulator of mitochondrial biogenesis) and TBX1 (marker of “brite” cell).
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:HFD-fed mice[1]
-
Dosage:2 and 10 mg/kg
-
Administration:P.o.
-
Result:Improved morphometric parameters and insulin levels, prevented HFD-induced adipocyte size and enhanced energy expenditure-related genes in WAT, alleviated HFD-induced hepatic steatosis, prevented HFD-induced fat deposition and enhanced mitochondrial biogenesis genes in BAT and improved intestinal morphology and modulates SCFA availability.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
No. CAS 205687-03-2
-
Appearance Liquid (Density: 1.038 g/cm3)
-
Peso molecular 308.41
-
Fòrmula C18H28O4
-
Color Colorless to light yellow
-
SMILES
CC(C)CCCCCCC(OCC1=CC=C(O)C(OC)=C1)=O
-
Structure Classification
-
Initial Source
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvente y solubilidad
DMSO : 100 mg/mL (324.24 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.11 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.11 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (270 KB)
-
SDS (420 KB)
- English - EN (420 KB)
- Français - FR (420 KB)
- Deutsch - DE (420 KB)
- Norwegian - NO (420 KB)
- Español - ES (420 KB)
- Swedish - SV (420 KB)
- Italian - IT (420 KB)
- Korean - KR (420 KB)
- Portuguese - PT (420 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2424 mL | 16.2122 mL | 32.4244 mL | 81.0609 mL |
| 5 mM | 0.6485 mL | 3.2424 mL | 6.4849 mL | 16.2122 mL | |
| 10 mM | 0.3242 mL | 1.6212 mL | 3.2424 mL | 8.1061 mL | |
| 15 mM | 0.2162 mL | 1.0808 mL | 2.1616 mL | 5.4041 mL | |
| 20 mM | 0.1621 mL | 0.8106 mL | 1.6212 mL | 4.0530 mL | |
| 25 mM | 0.1297 mL | 0.6485 mL | 1.2970 mL | 3.2424 mL | |
| 30 mM | 0.1081 mL | 0.5404 mL | 1.0808 mL | 2.7020 mL | |
| 40 mM | 0.0811 mL | 0.4053 mL | 0.8106 mL | 2.0265 mL | |
| 50 mM | 0.0648 mL | 0.3242 mL | 0.6485 mL | 1.6212 mL | |
| 60 mM | 0.0540 mL | 0.2702 mL | 0.5404 mL | 1.3510 mL | |
| 80 mM | 0.0405 mL | 0.2027 mL | 0.4053 mL | 1.0133 mL | |
| 100 mM | 0.0324 mL | 0.1621 mL | 0.3242 mL | 0.8106 mL |
Dihydrocapsiate Related Classifications
HY-124073 Related Classifications
Powered by Bioz