SY-LB-35
Based on 1 Customer Validation
SY-LB-35 is a potent bone morphogenetic protein (BMP) receptor agonist. SY-LB-35 can stimulate significant increases in cell number and cell viability in the C2C12 myoblast cell line, and causes shifts towards the S and G2/M phases of the cell cycle. SY-LB-35 stimulates canonical Smad and non-canonical PI3K/Akt, ERK, p38 and JNK intracellular signaling pathways.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.54%
- CAS No.: 2603461-70-5
- Formule: C15H11N3O
- Masse moléculaire:249.27
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-150793
SY-LB-57BMP Receptor Agonist -
HY-B0673
PirfenidoneAntifibrotic Agent -
HY-N0439
AsiaticosideTriterpene Glycoside -
HY-N1584
HalofuginoneNatural Product -
HY-N0439R
Asiaticoside (Standard)Triterpene Glycoside -
HY-N0587
DemethylzeylasteralApoptosis Inducer -
HY-124697
BMP signaling agonist sb4BMP Agonist -
HY-13756
TacrolimusCalcineurin Inhibitor -
HY-147372
SJ000063181BMP Signaling Activator -
HY-13027
DAPTγ-secretase Inhibitor -
HY-N1584A
Halofuginone hydrobromideNatural Product -
HY-N0102
IsoliquiritigeninAutophagy Inducer
Activité biologique
Description
IC50 & Target
BMP[1]
In Vitro
SY-LB-35 (0.01-1000 μM; 24 h) stimulates significant increases in cell number and cell viability in the C2C12 myoblast cell line[1].
SY-LB-35 (0.01-10 μM; 30 min or 15 min) stimulates Smad phosphorylation and nuclear translocation, activates the PI3K/Akt pathway and direct the cytoplasmic localization of p-Akt, stimulates the phosphorylation and activation of PI3K in the C2C12 cells[1].
SY-LB-35 (0.01-10 μM; 24 h) causes the cell cycle shifting to S and G2/M phases in the C2C12 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:C2C12 cells
-
Concentration:0.01, 0.1, 1, 10, 100 and 1000 μM
-
Incubation Time:24 h
-
Result:Stimulated significant increases in cell number and cell viability.
-
Cell Line:C2C12 cells
-
Concentration:0.01, 0.1, 1 and 10 μM
-
Incubation Time:30 or 15 min
-
Result:Stimulated Smad phosphorylation and nuclear translocation, activated the PI3K/Akt pathway and direct the cytoplasmic localization of p-Akt, stimulated the phosphorylation and activation of PI3K in the C2C12 cells.
-
Cell Line:C2C12 cells
-
Concentration:0.01, 0.1, 1 and 10 μM
-
Incubation Time:24 h
-
Result:Caused the cell cycle shifting to S and G2/M phases.
- Cell Cytotoxicity Assay
- Mammalian live/dead viability and cytotoxicity staining
- Flow cytometric DNA-content cell-cycle staining
- Protocol for Cell Counting and Cell Density Analysis
- BrdU Incorporation Assay
- CCK-8/WST-8 Cell Proliferation Assay
- Protocol for Cell Cycle
- MTT Cell Proliferation Assay
- Directly Induced Neuron Culture
- Cell Viability Determination by MTT Colorimetric Assay
Chemical Information
-
CAS No. 2603461-70-5
-
Appearance Solid
-
Masse moléculaire 249.27
-
Formule C15H11N3O
-
Color Light yellow to yellow
-
SMILES
OC1=CC2=C(NC(C3=NC4=CC=CC=C4N3)=C2)C=C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
In Vitro:
DMSO : 100 mg/mL (401.17 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (10.03 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (10.03 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.0117 mL | 20.0586 mL | 40.1171 mL | 100.2929 mL |
| 5 mM | 0.8023 mL | 4.0117 mL | 8.0234 mL | 20.0586 mL | |
| 10 mM | 0.4012 mL | 2.0059 mL | 4.0117 mL | 10.0293 mL | |
| 15 mM | 0.2674 mL | 1.3372 mL | 2.6745 mL | 6.6862 mL | |
| 20 mM | 0.2006 mL | 1.0029 mL | 2.0059 mL | 5.0146 mL | |
| 25 mM | 0.1605 mL | 0.8023 mL | 1.6047 mL | 4.0117 mL | |
| 30 mM | 0.1337 mL | 0.6686 mL | 1.3372 mL | 3.3431 mL | |
| 40 mM | 0.1003 mL | 0.5015 mL | 1.0029 mL | 2.5073 mL | |
| 50 mM | 0.0802 mL | 0.4012 mL | 0.8023 mL | 2.0059 mL | |
| 60 mM | 0.0669 mL | 0.3343 mL | 0.6686 mL | 1.6715 mL | |
| 80 mM | 0.0501 mL | 0.2507 mL | 0.5015 mL | 1.2537 mL | |
| 100 mM | 0.0401 mL | 0.2006 mL | 0.4012 mL | 1.0029 mL |
SY-LB-35 Related Classifications
HY-150795 Related Classifications
Powered by Bioz