QTX125 TFA
Based on 1 publication(s) in Google Scholar
QTX125 TFA is a potent and highly selective HDAC6 inhibitor. QTX125 TFA exhibits excellent selectivity over other HDACs. QTX125 has antitumor effects.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.93%
- CAS. Nr.: 2989537-78-0
- Formel: C25H20F3N3O7
- Molecular Weight:531.44
-
Speicherung:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) QTX125 TFA
More
Biologische Aktivität
|
HDAC6 |
QTX125 (25-500 nM; 24-48 hours) TFA treatment induces the subsequent apoptosis demonstrated by annexin V/propidium iodide double staining and the cleavage of caspase-9, caspase-8, caspase-3, and PARP[1].
In MCL cell lines MINO, REC-1, IRM-2 and HBL-2 cells, QTX125 TFA (10 nM, 10 μM, 100 μM) induces dose-dependent hyperacetylation of α-tubulin[1].
QTX125 TFA has the strongest growth-inhibitory effect in Burkitt cell lymphoma, follicular lymphoma, and mantle cell lymphoma (MCL)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MINO, REC-1, IRM-2 and HBL-2 cells
-
Concentration:25 nM, 50 nM, 100 nM, 500 nM
-
Incubation Time:24 hours, 48 hours
-
Result:Inhibited annexin V/propidium iodide double staining.
-
Cell Line:MINO, REC-1, IRM-2 and HBL-2 cells
-
Concentration:25 nM, 50 nM, 100 nM, 500 nM
-
Incubation Time:24 hours
-
Result:Inhibited the cleavage of caspase-9, caspase-8, caspase-3, and PARP.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Nude mice bearing REC-1 or MINO cells[1]
-
Dosage:60 mg/kg
-
Administration:Intraperitoneal administration; daily dosing for 5 days; for 4 weeks
-
Result:Inhibited tumor growth in REC-1 or MINO cells xenografted in nude mice.
Chemical Information
-
CAS. Nr. 2989537-78-0
-
Appearance Solid
-
Molecular Weight 531.44
-
Formel C25H20F3N3O7
-
Color Off-white to gray
-
SMILES
O=C(C1=C(C2=COC=C2)C=C(C3=CC=C(O)C=C3)N1)NCC4=CC=C(C(NO)=O)C=C4.O=C(O)C(F)(F)F
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
J Nanobiotechnology
Multifunctional CaCO3@Cur@QTX125@HA nanoparticles for effectively inhibiting growth of colorectal cancer cells. [Abstract]2023 Sep 29;21(1):353. PMID: 37773145
Lösungsmittel & Löslichkeit
DMSO : 125 mg/mL (235.21 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (3.91 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (3.91 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8817 mL | 9.4084 mL | 18.8168 mL | 47.0420 mL |
| 5 mM | 0.3763 mL | 1.8817 mL | 3.7634 mL | 9.4084 mL | |
| 10 mM | 0.1882 mL | 0.9408 mL | 1.8817 mL | 4.7042 mL | |
| 15 mM | 0.1254 mL | 0.6272 mL | 1.2545 mL | 3.1361 mL | |
| 20 mM | 0.0941 mL | 0.4704 mL | 0.9408 mL | 2.3521 mL | |
| 25 mM | 0.0753 mL | 0.3763 mL | 0.7527 mL | 1.8817 mL | |
| 30 mM | 0.0627 mL | 0.3136 mL | 0.6272 mL | 1.5681 mL | |
| 40 mM | 0.0470 mL | 0.2352 mL | 0.4704 mL | 1.1760 mL | |
| 50 mM | 0.0376 mL | 0.1882 mL | 0.3763 mL | 0.9408 mL | |
| 60 mM | 0.0314 mL | 0.1568 mL | 0.3136 mL | 0.7840 mL | |
| 80 mM | 0.0235 mL | 0.1176 mL | 0.2352 mL | 0.5880 mL | |
| 100 mM | 0.0188 mL | 0.0941 mL | 0.1882 mL | 0.4704 mL |
QTX125 TFA Related Classifications
HY-120448A Related Classifications
Powered by Bioz